| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <bc44d4fe-9ffc-0270-1c74-e6190ea063f2@linaro.org>
Date: Tue, 10 Jan 2023 12:08:05 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
agross@...nel.org, andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_rohkumar@...cinc.com, srinivas.kandagatla@...aro.org,
dianders@...omium.org, swboyd@...omium.org, judyhsiao@...omium.org,
konrad.dybcio@...aro.org, mka@...omium.org
Subject: Re: [PATCH v2 3/8] arm64: dts: qcom: sc7280: audioreach: Add lpass
pil node
On 05/01/2023 14:37, Srinivasa Rao Mandadapu wrote:
> Add lpass pil node for sc7280 based audioreach platforms.
LPASS PIL - these are acronyms.
>
Subject: drop "audioreach" from every patch. Not a directory.
Both comments apply to all your patches.
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@...cinc.com>
Your patchset (with dependency) does not apply. Please rebase.
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 90 insertions(+)
There are several dtbs_check warnings:
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb:
sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh',
'qcom,msm-mbhc-hphl-swh' do not match any of the regexes:
'^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
sound: dai-link@0: 'platform' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
sound: dai-link@1: 'platform' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
sound: dai-link@2: 'platform' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
sound: dai-link@3: 'platform' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
sound: '#sound-dai-cells', 'adsp-mode', 'qcom,msm-mbhc-gnd-swh',
'qcom,msm-mbhc-hphl-swh' do not match any of the regexes:
'^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb:
sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh',
'qcom,msm-mbhc-hphl-swh' do not match any of the regexes:
'^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb:
sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh',
'qcom,msm-mbhc-hphl-swh' do not match any of the regexes:
'^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
make[1]: Leaving directory '/home/krzk/dev/linux/linux/out'
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-idp.dtb:
remoteproc@...0000: qcom,halt-regs:0: [228] is too short
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-idp.dtb:
remoteproc@...0000: glink-edge:gpr: 'q6apm', 'q6prm' do not match any of
the regexes: '^service@[1-9a-d]$', 'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-idp.dtb:
remoteproc@...0000: 'power-domain-names', 'reg-names', 'required-opps'
do not match any of the regexes: 'pinctrl-[0-9]+'
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 0adf133..f10a663 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
> #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
> +#include <dt-bindings/clock/qcom,lpass-sc7280.h>
> #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
> #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> @@ -21,6 +22,7 @@
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +#include <dt-bindings/soc/qcom,gpr.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> #include <dt-bindings/sound/qcom,lpass.h>
> #include <dt-bindings/thermal/thermal.h>
> @@ -3436,6 +3438,94 @@
> status = "disabled";
> };
>
> + remoteproc_adsp: remoteproc@...0000 {
> + compatible = "qcom,sc7280-adsp-pil";
> + reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>;
> + reg-names = "qdsp6ss_base", "lpass_efuse";
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 7 IRQ_TYPE_NONE>;
> +
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack", "shutdown-ack";
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_CFG_NOC_LPASS_CLK>;
> +
> + clock-names = "xo", "gcc_cfg_noc_lpass";
> +
> + iommus = <&apps_smmu 0x1800 0x0>;
> +
> + power-domains = <&rpmhpd SC7280_CX>;
> + power-domain-names = "cx";
> +
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> + <&aoss_reset AOSS_CC_LPASS_RESTART>;
> +
> + reset-names = "pdc_sync", "cc_lpass";
> + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
> +
> + memory-region = <&adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> +
> + gpr {
> + compatible = "qcom,gpr";
> + qcom,glink-channels = "adsp_apps";
> + qcom,domain = <GPR_DOMAIN_ID_ADSP>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + qcom,intents = <512 20>;
> +
> + q6apm: q6apm {
This is for sure wrong. Please send your code based on newest
submissions. Do not start work on some old DTS full of issues, but the
new one with corrected.
You also did not run automated tools which would point all this out -
wrong name, missing unit address (you have address-cells above, right?)
> + reg = <GPR_APM_MODULE_IID>;
> + compatible = "qcom,q6apm";
> + #sound-dai-cells = <0>;
Blank line
> + q6apmdai: dais {
> + compatible = "qcom,q6apm-dais";
> + #sound-dai-cells = <1>;
> + iommus = <&apps_smmu 0x1801 0x0>;
> + };
> +
> + q6apmbedai: bedais {
> + compatible = "qcom,q6apm-lpass-dais";
> + #sound-dai-cells = <1>;
> + };
> + };
> +
> + q6prm: q6prm {
> + reg = <GPR_PRM_MODULE_IID>;
> + compatible = "qcom,q6prm";
> + #clock-cells = <2>;
> + q6prmcc: cc {
> + compatible = "qcom,q6prm-lpass-clocks";
> + #clock-cells = <2>;
> + };
> + };
> + };
> + };
> + };
> +
> remoteproc_wpss: remoteproc@...0000 {
> compatible = "qcom,sc7280-wpss-pil";
> reg = <0 0x08a00000 0 0x10000>;
Best regards,
Krzysztof
Powered by blists - more mailing lists