[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <19e61226-c0b9-657d-c36f-38067c6b01a7@linaro.org>
Date: Tue, 10 Jan 2023 12:12:41 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
agross@...nel.org, andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_rohkumar@...cinc.com, srinivas.kandagatla@...aro.org,
dianders@...omium.org, swboyd@...omium.org, judyhsiao@...omium.org,
konrad.dybcio@...aro.org, mka@...omium.org
Subject: Re: [PATCH v2 4/8] arm64: dts: qcom: sc7280: audioreach: Update
VA/RX/TX macro clock nodes
On 05/01/2023 14:37, Srinivasa Rao Mandadapu wrote:
> Update VA, RX and TX macro and lpass_tlmm clock properties and
> enable them.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@...cinc.com>
> ---
> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 62 ++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index e1fe56c..8c55753 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -8,6 +8,10 @@
>
> #include <dt-bindings/sound/qcom,q6afe.h>
>
> +/delete-node/ &lpass_rx_macro;
> +/delete-node/ &lpass_tx_macro;
> +/delete-node/ &lpass_va_macro;
> +
> /{
> /* BOARD-SPECIFIC TOP LEVEL NODES */
> sound: sound {
> @@ -107,3 +111,61 @@
> };
> };
> };
> +
> +&soc {
> + lpass_rx_macro: codec@...0000 {
These should be properties of DTSI. The SoC either has them or not. It's
not conditional or dual-setup...
> + compatible = "qcom,sc7280-lpass-rx-macro";
> + reg = <0 0x03200000 0 0x1000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
> +
> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&lpass_va_macro>;
> +
> + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
> + };
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
codec@...0000: clock-names: 'oneOf' conditional failed, one must be fixed:
['mclk', 'macro', 'dcodec'] is too long
'core' was expected
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
codec@...0000: Unevaluated properties are not allowed ('clock-names' was
unexpected)
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
audio@...7000: clocks: [[218, 4], [221, 12], [221, 11], [221, 6], [221,
8], [223, 8], [223, 5], [223, 6], [223, 7], [218, 10]] is too long
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb:
audio@...7000: clock-names: 'oneOf' conditional failed, one must be fixed:
['aon_cc_audio_hm_h', 'audio_cc_ext_mclk0',
'core_cc_sysnoc_mport_core', 'core_cc_ext_if0_ibit',
'core_cc_ext_if1_ibit', 'audio_cc_codec_mem', 'audio_cc_codec_mem0',
'audio_cc_codec_mem1', 'audio_cc_codec_mem2', 'aon_cc_va_mem0'] is too long
'core_cc_sysnoc_mport_core' was expected
'audio_cc_codec_mem' was expected
'audio_cc_codec_mem0' was expected
'audio_cc_codec_mem1' was expected
'audio_cc_codec_mem2' was expected
'aon_cc_va_mem0' was expected
From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
I posted recently several fixes, so some of the warnings might be
skipped. But I think you did not test this at all...
> +
> + lpass_tx_macro: codec@...0000 {
> + compatible = "qcom,sc7280-lpass-tx-macro";
> + reg = <0 0x03220000 0 0x1000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>;
> +
> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&lpass_va_macro>;
> +
> + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
> +
Drop blank line
> + };
> +
> + lpass_va_macro: codec@...0000 {
> + compatible = "qcom,sc7280-lpass-va-macro";
> + reg = <0 0x03370000 0 0x1000>;
> +
> + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
> + pinctrl-names = "default";
> +
> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +
> + clock-names = "mclk", "macro", "dcodec";
> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
> + };
> +};
Best regards,
Krzysztof
Powered by blists - more mailing lists