| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230111032542.20306-2-jian.yang@mediatek.com>
Date: Wed, 11 Jan 2023 11:25:41 +0800
From: Jian Yang <jian.yang@...iatek.com>
To: Lorenzo Pieralisi <lpieralisi@...nel.org>,
Jianjun Wang <jianjun.wang@...iatek.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Ryder Lee <ryder.lee@...iatek.com>,
Krzysztof Wilczyński <kw@...ux.com>
CC: <linux-pci@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
<jian.yang@...iatek.com>, <chuanjia.liu@...iatek.com>,
<jieyy.yang@...iatek.com>, <qizhong.cheng@...iatek.com>,
<rex-bc.chen@...iatek.com>, <david-yh.chiu@...iatek.com>
Subject: [PATCH 1/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component
From: "jian.yang" <jian.yang@...iatek.com>
Make MediaTek's controller driver capable of controlling power
supplies and reset pin of a downstream component in power-on and
power-off flow.
Some downstream components (e.g., a WIFI chip) may need an extra
reset other than of PERST# and their power supplies, depending on
the requirements of platform, may need to controlled by their
parent's driver. To meet the requirements described above, I add this
feature to MediaTek's PCIe controller driver as a optional feature.
Signed-off-by: jian.yang <jian.yang@...iatek.com>
---
drivers/pci/controller/pcie-mediatek-gen3.c | 114 +++++++++++++++++++-
1 file changed, 113 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index b8612ce5f4d0..5ddbc2a0c020 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -8,6 +8,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
@@ -15,11 +17,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/msi.h>
+#include <linux/of_gpio.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include "../pci.h"
@@ -100,6 +104,13 @@
#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)
#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2)
+/* Downstream Component power supplies used by MediaTek PCIe */
+static const char *const dsc_power_supplies[] = {
+ "pcie1v8",
+ "pcie3v3",
+ "pcie12v",
+};
+
/**
* struct mtk_msi_set - MSI information for each set
* @base: IO mapped register base
@@ -122,6 +133,10 @@ struct mtk_msi_set {
* @phy: PHY controller block
* @clks: PCIe clocks
* @num_clks: PCIe clocks count for this port
+ * @supplies: Downstream Component power supplies
+ * @num_supplies: Downstream Component power supplies count
+ * @dsc_reset: The GPIO pin to reset Downstream component
+ * @dsc_reset_delay_ms: Delay in ms before the deassertion of reset GPIO
* @irq: PCIe controller interrupt number
* @saved_irq_state: IRQ enable state saved at suspend time
* @irq_lock: lock protecting IRQ register access
@@ -141,6 +156,10 @@ struct mtk_gen3_pcie {
struct phy *phy;
struct clk_bulk_data *clks;
int num_clks;
+ struct regulator_bulk_data *supplies;
+ int num_supplies;
+ struct gpio_desc *dsc_reset;
+ u32 dsc_reset_delay_ms;
int irq;
u32 saved_irq_state;
@@ -763,7 +782,9 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
struct device *dev = pcie->dev;
struct platform_device *pdev = to_platform_device(dev);
struct resource *regs;
- int ret;
+ enum of_gpio_flags flags;
+ enum gpiod_flags dsc_reset_init_flags;
+ int ret, i;
regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcie-mac");
if (!regs)
@@ -809,14 +830,103 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)
return pcie->num_clks;
}
+ pcie->num_supplies = ARRAY_SIZE(dsc_power_supplies);
+ pcie->supplies = devm_kcalloc(dev, pcie->num_supplies,
+ sizeof(*pcie->supplies),
+ GFP_KERNEL);
+ if (!pcie->supplies)
+ return -ENOMEM;
+
+ for (i = 0; i < pcie->num_supplies; i++)
+ pcie->supplies[i].supply = dsc_power_supplies[i];
+
+ ret = devm_regulator_bulk_get(dev, pcie->num_supplies, pcie->supplies);
+ if (ret)
+ return ret;
+
+ ret = of_get_named_gpio_flags(dev->of_node, "dsc-reset-gpios", 0,
+ &flags);
+ if (ret < 0) {
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ /*
+ * It's okay that the reset GPIO of a downstream component not
+ * defined in related devicetree node since it's an optional
+ * property.
+ */
+ return 0;
+ }
+
+ dsc_reset_init_flags = (flags & OF_GPIO_ACTIVE_LOW) ? GPIOD_OUT_HIGH :
+ GPIOD_OUT_LOW;
+ pcie->dsc_reset = devm_gpiod_get_optional(dev, "dsc-reset",
+ dsc_reset_init_flags);
+ if (IS_ERR(pcie->dsc_reset)) {
+ ret = PTR_ERR(pcie->dsc_reset);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to request DSC reset gpio\n");
+
+ return ret;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "dsc-reset-msleep",
+ &pcie->dsc_reset_delay_ms);
+ if (ret) {
+ dev_info(dev, "Failed to get delay time of DSC, set it to default 5ms\n");
+ pcie->dsc_reset_delay_ms = 5;
+ }
+
return 0;
}
+static int mtk_pcie_dsc_power_up(struct mtk_gen3_pcie *pcie)
+{
+ struct device *dev = pcie->dev;
+ int ret;
+
+ /* Assert Downstream Component reset */
+ if (pcie->dsc_reset)
+ gpiod_set_value_cansleep(pcie->dsc_reset, 1);
+
+ ret = regulator_bulk_enable(pcie->num_supplies, pcie->supplies);
+ if (ret)
+ dev_err(dev, "failed to enable DSC power supplies: %d\n", ret);
+
+ /* De-assert Downstream Component reset */
+ if (pcie->dsc_reset) {
+ /*
+ * Wait for a short time before we de-assert the reset GPIO.
+ * Depends on the requirement of a specific Downstream
+ * Component.
+ */
+ usleep_range(1000 * pcie->dsc_reset_delay_ms,
+ 1000 * pcie->dsc_reset_delay_ms + 100);
+ gpiod_set_value_cansleep(pcie->dsc_reset, 0);
+ }
+
+ return ret;
+}
+
+static void mtk_pcie_dsc_power_down(struct mtk_gen3_pcie *pcie)
+{
+ /* Assert Downstream Component reset */
+ if (pcie->dsc_reset)
+ gpiod_set_value_cansleep(pcie->dsc_reset, 1);
+
+ regulator_bulk_disable(pcie->num_supplies, pcie->supplies);
+}
+
static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
{
struct device *dev = pcie->dev;
int err;
+ /* Downstream Component power up before RC */
+ err = mtk_pcie_dsc_power_up(pcie);
+ if (err)
+ return err;
+
/* PHY power on and enable pipe clock */
reset_control_deassert(pcie->phy_reset);
@@ -855,6 +965,7 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
phy_exit(pcie->phy);
err_phy_init:
reset_control_assert(pcie->phy_reset);
+ mtk_pcie_dsc_power_down(pcie);
return err;
}
@@ -870,6 +981,7 @@ static void mtk_pcie_power_down(struct mtk_gen3_pcie *pcie)
phy_power_off(pcie->phy);
phy_exit(pcie->phy);
reset_control_assert(pcie->phy_reset);
+ mtk_pcie_dsc_power_down(pcie);
}
static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
--
2.18.0
Powered by blists - more mailing lists