| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230120174036.351937-1-krzysztof.kozlowski@linaro.org>
Date: Fri, 20 Jan 2023 18:40:36 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
DT schema expects nodes ending with "pins:
qcom-apq8060-dragonboard.dtb: mpps@50: cm3605-mpps-state: 'oneOf' conditional failed, one must be fixed:
'mpp5' does not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Warning visible after:
https://lore.kernel.org/r/20230120165103.1278852-1-robh@kernel.org
---
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 7a4c59e04af6..8e4b61e4d4b1 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -435,15 +435,13 @@ &pm8058_led133 {
&pm8058_mpps {
dragon_cm3605_mpps: cm3605-mpps-state {
- mpp5 {
- pins = "mpp5";
- function = "analog";
- input-enable;
- bias-high-impedance;
- /* Let's use channel 5 */
- qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
- power-source = <PM8058_GPIO_S3>;
- };
+ pins = "mpp5";
+ function = "analog";
+ input-enable;
+ bias-high-impedance;
+ /* Let's use channel 5 */
+ qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+ power-source = <PM8058_GPIO_S3>;
};
};
--
2.34.1
Powered by blists - more mailing lists