linux-kernel - [PATCH net] net: mdio-mux-meson-g12a: force internal PHY off on mux switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230123135037.195157-1-jbrunet@baylibre.com>
Date:   Mon, 23 Jan 2023 14:50:37 +0100
From:   Jerome Brunet <jbrunet@...libre.com>
To:     netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
        Andrew Lunn <andrew@...n.ch>
Cc:     Jerome Brunet <jbrunet@...libre.com>,
        linux-amlogic@...ts.infradead.org,
        Kevin Hilman <khilman@...libre.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        linux-kernel@...r.kernel.org,
        Heiner Kallweit <hkallweit1@...il.com>,
        Qi Duan <qi.duan@...ogic.com>
Subject: [PATCH net] net: mdio-mux-meson-g12a: force internal PHY off on mux switch

Force the internal PHY off then on when switching to the internal path.
This fixes problems where the PHY ID is not properly set.

Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support")
Suggested-by: Qi Duan <qi.duan@...ogic.com>
Co-developed-by: Heiner Kallweit <hkallweit1@...il.com>
Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---

The initial discussion about this change can be found here:
https://lore.kernel.org/all/1j4jslwen5.fsf@starbuckisacylon.baylibre.com/

 drivers/net/mdio/mdio-mux-meson-g12a.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/mdio/mdio-mux-meson-g12a.c b/drivers/net/mdio/mdio-mux-meson-g12a.c
index 4a2e94faf57e..da61f00a6666 100644
--- a/drivers/net/mdio/mdio-mux-meson-g12a.c
+++ b/drivers/net/mdio/mdio-mux-meson-g12a.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/device.h>
@@ -151,6 +152,7 @@ static const struct clk_ops g12a_ephy_pll_ops = {
 static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
 {
 	int ret;
+	u32 value;
 
 	/* Enable the phy clock */
 	if (!priv->pll_is_enabled) {
@@ -163,18 +165,25 @@ static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
 
 	/* Initialize ephy control */
 	writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
-	writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
-	       FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
-	       FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
-	       PHY_CNTL1_CLK_EN |
-	       PHY_CNTL1_CLKFREQ |
-	       PHY_CNTL1_PHY_ENB,
-	       priv->regs + ETH_PHY_CNTL1);
+
+	/* Make sure we get a 0 -> 1 transition on the enable bit */
+	value = FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
+		FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
+		FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
+		PHY_CNTL1_CLK_EN |
+		PHY_CNTL1_CLKFREQ;
+	writel(value, priv->regs + ETH_PHY_CNTL1);
 	writel(PHY_CNTL2_USE_INTERNAL |
 	       PHY_CNTL2_SMI_SRC_MAC |
 	       PHY_CNTL2_RX_CLK_EPHY,
 	       priv->regs + ETH_PHY_CNTL2);
 
+	value |= PHY_CNTL1_PHY_ENB;
+	writel(value, priv->regs + ETH_PHY_CNTL1);
+
+	/* The phy needs a bit of time to power up */
+	mdelay(10);
+
 	return 0;
 }
 
-- 
2.39.0