| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+icZUUOZoLOFiBcYkccWPSusk9G_Rhf3DOZYWat-K+VfWFHQw@mail.gmail.com>
Date: Mon, 30 Jan 2023 03:24:41 +0100
From: Sedat Dilek <sedat.dilek@...il.com>
To: Ian Rogers <irogers@...gle.com>
Cc: Arnaldo Carvalho de Melo <acme@...hat.com>,
Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...hat.com>,
Mark Rutland <mark.rutland@....com>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Jiri Olsa <jolsa@...nel.org>,
Namhyung Kim <namhyung@...nel.org>,
linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org,
Nick Desaulniers <ndesaulniers@...gle.com>,
Nathan Chancellor <natechancellor@...il.com>,
llvm@...ts.linux.dev, Ben Hutchings <benh@...ian.org>
Subject: Re: [6.1.7][6.2-rc5] perf all metrics test: FAILED!
?
On Mon, Jan 30, 2023 at 12:21 AM Ian Rogers <irogers@...gle.com> wrote:
>
> On Sun, Jan 29, 2023 at 1:59 AM Sedat Dilek <sedat.dilek@...il.com> wrote:
> >
> > [ CC LLVM linux folks + Ben from Debian kernel team ]
> >
> > Hi,
> >
> > I am playing with LLVM version 16.0.0-rc1 which was released yesterday and PERF.
> >
> > After building my selfmade LLVM toolchain, I built perf and run some
> > perf tests here on my Intel SandyBridge CPU (details see below).
> >
> > perf all metrics test: FAILED!
> >
> > ...with both Debian's perf version 6.1.7 and my selfmade version 6.2-rc5.
> >
> > Just noticed:
> >
> > Couldn't bump rlimit(MEMLOCK), failures may take place when creating
> > BPF maps, etc
> >
> > Run the below tests with `sudo` - made this go away - still FAILED.
> >
> > But maybe I am missing to activate some sysfs/debug or whatever other stuff?
>
> Hi Sedat,
>
> things have been improving wrt metrics and so this failure may have
> just been because of the addition of a previously missing metric. The
> rlimit thing shouldn't affect things but maybe file descriptors?
> Looking at the test output the issue is:
>
> ```
> Metric 'tma_dram_bound' not printed in:
> # Running 'internals/synthesize' benchmark:
> Computing performance of single threaded perf event synthesis by
> synthesizing events on the perf process itself:
> Average synthesis took: 207.680 usec (+- 0.176 usec)
> Average num. events: 30.000 (+- 0.000)
> Average time per event 6.923 usec
> Average data synthesis took: 217.833 usec (+- 0.202 usec)
> Average num. events: 161.000 (+- 0.000)
> Average time per event 1.353 usec
>
> Performance counter stats for 'perf bench internals synthesize':
>
> <not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
> (0,00%)
> <not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
> (0,00%)
> <not counted> CPU_CLK_UNHALTED.THREAD
> (0,00%)
> <not counted> MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
> (0,00%)
> ```
>
> So the test was checking to see whether the tma_dram_bound metric
> could be computed on your Sandybridge and it failed. The event counts
> below show that every event came back "<not counted>" which is usually
> indicative of a permissions problem - it is also not surprising given
> this that the metric wasn't computed. You could try repeating the
> command the test is trying with something like "perf stat -M
> tma_dram_bound -a sleep 1", but running as root should have resolved
> that issue. Does that give you enough to keep exploring?
>
Hi Ian,
Thanks for your feedback!
I booted into my Debian kernel - just to see what happens.
# cat /proc/version
Linux version 6.1.0-2-amd64 (debian-kernel@...ts.debian.org) (gcc-12
(Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1
SMP PREEMPT_DYNAMIC Debian 6.1.7-1 (2023-01-18)
All things run as root...
# echo 0 | tee /proc/sys/kernel/kptr_restrict
/proc/sys/kernel/perf_event_paranoid
0
# /usr/bin/perf test 10 92 98 99 100 101
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
92: perf record tests : Ok
98: perf stat tests : Ok
99: perf all metricgroups test : Ok
100: perf all metrics test : FAILED!
101: perf all PMU test : Ok
# perf stat -M tma_dram_bound -a sleep 1
Performance counter stats for 'system wide':
<not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
(0,00%)
<not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
(0,00%)
<not counted> CPU_CLK_UNHALTED.THREAD
(0,00%)
<not counted> MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
(0,00%)
1,002148600 seconds time elapsed
Hmm... looking at... Metric 'tma_l3_bound' ...
Running...
# perf stat --verbose -M tma_l3_bound -a sleep 1
Using CPUID GenuineIntel-6-2A-7
metric expr (MEM_LOAD_UOPS_RETIRED.LLC_HIT /
(MEM_LOAD_UOPS_RETIRED.LLC_HIT + 7 *
MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS)) *
CYCLE_ACTIVITY.STALLS_L2_PENDING / CLKS for tma_l3_bound
metric expr CPU_CLK_UNHALTED.THREAD for CLKS
found event MEM_LOAD_UOPS_RETIRED.LLC_HIT
found event CYCLE_ACTIVITY.STALLS_L2_PENDING
found event CPU_CLK_UNHALTED.THREAD
found event MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
Parsing metric events
'{MEM_LOAD_UOPS_RETIRED.LLC_HIT/metric-id=MEM_LOAD_UOPS_RETIRED.LLC_HIT/,CYCLE_ACTIVITY.STALLS_L2_PENDING/metric-id=CYCLE_ACTIVITY.STALLS_L2_PEND
ING/,CPU_CLK_UNHALTED.THREAD/metric-id=CPU_CLK_UNHALTED.THREAD/,MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS/metric-id=MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS/}:W'
MEM_LOAD_UOPS_RETIRED.LLC_HIT -> cpu/event=0xd1,period=0xc365,umask=0x4/
CYCLE_ACTIVITY.STALLS_L2_PENDING ->
cpu/event=0xa3,cmask=0x5,period=0x1e8483,umask=0x5/
CPU_CLK_UNHALTED.THREAD -> cpu/event=0x3c,period=0x1e8483/
MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS -> cpu/event=0xd4,period=0x186a7,umask=0x2/
Control descriptor is not initialized
MEM_LOAD_UOPS_RETIRED.LLC_HIT: 0 4007421228 0
CYCLE_ACTIVITY.STALLS_L2_PENDING: 0 4007421228 0
CPU_CLK_UNHALTED.THREAD: 0 4007421228 0
MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS: 0 4007421228 0
Performance counter stats for 'system wide':
<not counted> MEM_LOAD_UOPS_RETIRED.LLC_HIT
(0,00%)
<not counted> CYCLE_ACTIVITY.STALLS_L2_PENDING
(0,00%)
<not counted> CPU_CLK_UNHALTED.THREAD
(0,00%)
<not counted> MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS
(0,00%)
1,002310013 seconds time elapsed
So those events/metric-ids resulting in "<not counted>" are all found.
What means "Control descriptor is not initialized"?
To summarize:
Those two tests in "100: perf all metrics test" FAILED:
1. tma_dram_bound
2. tma_l3_bound
Best regards,
-Sedat-
> Thanks,
> Ian
>
> > Last perf version which was OK:
> >
> > ~/bin/perf -v
> > perf version 6.0.0
> >
> > echo "linux-perf: Adjust limited access to performance monitoring and
> > observability operations"
> > echo 0 | sudo tee /proc/sys/kernel/kptr_restrict
> > /proc/sys/kernel/perf_event_paranoid
> > 0
> >
> > ~/bin/perf test 10 86 92 93 94 95
> > 10: PMU events :
> > 10.1: PMU event table sanity : Ok
> > 10.2: PMU event map aliases : Ok
> > 10.3: Parsing of PMU event table metrics : Ok
> > 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > 86: perf record tests : Ok
> > 92: perf stat tests : Ok
> > 93: perf all metricgroups test : Ok
> > 94: perf all metrics test : Ok
> > 95: perf all PMU test : Ok
> >
> > echo 1 | sudo tee /proc/sys/kernel/kptr_restrict
> > /proc/sys/kernel/perf_event_paranoid
> > echo "linux-perf: Reset limited access to performance monitoring and
> > observability operations"
> >
> > If you need further information, please let me know.
> >
> > Thanks.
> >
> > Regards,
> > -Sedat-
> >
> > P.S. Instructions
> >
> > [ REPRODUCER ]
> >
> > LLVM_MVER="16"
> >
> > # Debian LLVM
> > ##LLVM_TOOLCHAIN_PATH="/usr/lib/llvm-${LLVM_MVER}/bin"
> > # Selfmade LLVM
> > LLVM_TOOLCHAIN_PATH="/opt/llvm/bin"
> > if [ -d ${LLVM_TOOLCHAIN_PATH} ]; then
> > export PATH="${LLVM_TOOLCHAIN_PATH}:${PATH}"
> > fi
> >
> > PYTHON_VER="3.11"
> > MAKE="make"
> > MAKE_OPTS="V=1 -j1 HOSTCC=clang-$LLVM_MVER HOSTLD=ld.lld
> > HOSTAR=llvm-ar CC=clang-$LLVM_MVER LD=ld.lld AR=llvm-ar
> > STRIP=llvm-strip"
> >
> > echo "LLVM MVER ........ $LLVM_MVER"
> > echo "Path settings .... $PATH"
> > echo "Python version ... $PYTHON_VER"
> > echo "make line ........ $MAKE $MAKE_OPTS"
> >
> > LANG=C LC_ALL=C make -C tools/perf clean 2>&1 | tee ../make-log_perf-clean.txt
> >
> > LANG=C LC_ALL=C $MAKE $MAKE_OPTS -C tools/perf
> > PYTHON=python${PYTHON_VER} install-bin 2>&1 | tee
> > ../make-log_perf-install_bin_python${PYTHON_VER}_llvm${LLVM_MVER}.txt
> >
> >
> > [ TESTS ]
> >
> > [ TESTS - START ]
> >
> > echo 0 | sudo tee /proc/sys/kernel/kptr_restrict
> > /proc/sys/kernel/perf_event_paranoid
> >
> > [ TESTS - DEBIAN ]
> >
> > /usr/bin/perf -v
> > perf version 6.1.7
> >
> > /usr/bin/perf test 10 92 98 99 100 101
> >
> > 10: PMU events :
> > 10.1: PMU event table sanity : Ok
> > 10.2: PMU event map aliases : Ok
> > 10.3: Parsing of PMU event table metrics : Ok
> > 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > 92: perf record tests : Ok
> > 98: perf stat tests : Ok
> > 99: perf all metricgroups test : Ok
> > 100: perf all metrics test : FAILED!
> > 101: perf all PMU test : Ok
> >
> > [ TESTS - DILEKS ]
> >
> > ~/bin/perf -v
> > perf version 6.2.0-rc5
> >
> > ~/bin/perf test 7 87 93 94 95 96
> >
> > 7: PMU events :
> > 7.1: PMU event table sanity : Ok
> > 7.2: PMU event map aliases : Ok
> > 7.3: Parsing of PMU event table metrics : Ok
> > 7.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > 87: perf record tests : Ok
> > 93: perf stat tests : Ok
> > 94: perf all metricgroups test : Ok
> > 95: perf all metrics test : FAILED!
> > 96: perf all PMU test : Ok
> >
> > [ TESTS - FAILED ]
> >
> > /usr/bin/perf test --verbose 100 2>&1 | tee
> > perf-test-verbose-100-perf-all-metrics-test_debian-perf-6-1-7.txt
> >
> > ~/bin/perf test --verbose 95 2>&1 | tee
> > perf-test-verbose-95-perf-all-metrics-test_dileks-perf-6-2-rc5.txt
> >
> > [ TESTS - STOP ]
> >
> > echo 1 | sudo tee /proc/sys/kernel/kptr_restrict
> > /proc/sys/kernel/perf_event_paranoid
> >
> > - EOT -
Powered by blists - more mailing lists