lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230211115110.1462920-3-konrad.dybcio@linaro.org>
Date:   Sat, 11 Feb 2023 12:51:02 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     linux-arm-msm@...r.kernel.org, andersson@...nel.org,
        agross@...nel.org, krzysztof.kozlowski@...aro.org
Cc:     marijn.suijten@...ainline.org,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Clark <robdclark@...il.com>,
        Abhinav Kumar <quic_abhinavk@...cinc.com>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Douglas Anderson <dianders@...omium.org>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Loic Poulain <loic.poulain@...aro.org>,
        Vinod Koul <vkoul@...nel.org>,
        Vladimir Lypak <vladimir.lypak@...il.com>,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 02/10] drm/msm/dsi: Turn msm_dsi_config::io_start into a 2d array

Currently, we allow for MAX_DSI entries in io_start to facilitate for
MAX_DSI number of DSI hosts at different addresses. The configuration
is matched against the DSI CTRL hardware revision read back from the
component. We need a way to resolve situations where multiple SoCs
with different register maps may use the same version of DSI CTRL. In
preparation to do so, make msm_dsi_config a 2d array where each entry
represents a set of configurations adequate for a given SoC.

This is totally fine to do, as the only differentiating factors
between same-version-different-SoCs configurations are the number of
DSI hosts (1 or 2, at least as of today) and the set of registers.
The regulator setup is the same, because the DSI hardware is the same,
regardless of the SoC it was implemented in.

Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
 drivers/gpu/drm/msm/dsi/dsi_cfg.c  | 52 ++++++++++++++++++++++--------
 drivers/gpu/drm/msm/dsi/dsi_cfg.h  |  5 ++-
 drivers/gpu/drm/msm/dsi/dsi_host.c |  2 +-
 3 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 6d21f0b33411..068d45b3a8f0 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -21,7 +21,9 @@ static const struct msm_dsi_config apq8064_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(apq8064_dsi_regulators),
 	.bus_clk_names = dsi_v2_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
-	.io_start = { 0x4700000, 0x5800000 },
+	.io_start = {
+		{ 0x4700000, 0x5800000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -41,7 +43,9 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(msm8974_apq8084_regulators),
 	.bus_clk_names = dsi_6g_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
-	.io_start = { 0xfd922800, 0xfd922b00 },
+	.io_start = {
+		{ 0xfd922800, 0xfd922b00 },
+	},
 	.num_dsi = 2,
 };
 
@@ -60,7 +64,9 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(msm8916_dsi_regulators),
 	.bus_clk_names = dsi_8916_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
-	.io_start = { 0x1a98000 },
+	.io_start = {
+		{ 0x1a98000 },
+	},
 	.num_dsi = 1,
 };
 
@@ -79,7 +85,9 @@ static const struct msm_dsi_config msm8976_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(msm8976_dsi_regulators),
 	.bus_clk_names = dsi_8976_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_8976_bus_clk_names),
-	.io_start = { 0x1a94000, 0x1a96000 },
+	.io_start = {
+		{ 0x1a94000, 0x1a96000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -98,7 +106,9 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(msm8994_dsi_regulators),
 	.bus_clk_names = dsi_6g_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
-	.io_start = { 0xfd998000, 0xfd9a0000 },
+	.io_start = {
+		{ 0xfd998000, 0xfd9a0000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -118,7 +128,9 @@ static const struct msm_dsi_config msm8996_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(msm8996_dsi_regulators),
 	.bus_clk_names = dsi_8996_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_8996_bus_clk_names),
-	.io_start = { 0x994000, 0x996000 },
+	.io_start = {
+		{ 0x994000, 0x996000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -137,7 +149,9 @@ static const struct msm_dsi_config msm8998_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(msm8998_dsi_regulators),
 	.bus_clk_names = dsi_msm8998_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_msm8998_bus_clk_names),
-	.io_start = { 0xc994000, 0xc996000 },
+	.io_start = {
+		{ 0xc994000, 0xc996000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -155,7 +169,9 @@ static const struct msm_dsi_config sdm660_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sdm660_dsi_regulators),
 	.bus_clk_names = dsi_sdm660_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sdm660_bus_clk_names),
-	.io_start = { 0xc994000, 0xc996000 },
+	.io_start = {
+		{ 0xc994000, 0xc996000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -177,7 +193,9 @@ static const struct msm_dsi_config sdm845_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sdm845_dsi_regulators),
 	.bus_clk_names = dsi_sdm845_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
-	.io_start = { 0xae94000, 0xae96000 },
+	.io_start = {
+		{ 0xae94000, 0xae96000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -191,7 +209,9 @@ static const struct msm_dsi_config sm8550_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sm8550_dsi_regulators),
 	.bus_clk_names = dsi_sdm845_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
-	.io_start = { 0xae94000, 0xae96000 },
+	.io_start = {
+		{ 0xae94000, 0xae96000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -205,7 +225,9 @@ static const struct msm_dsi_config sc7180_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sc7180_dsi_regulators),
 	.bus_clk_names = dsi_sc7180_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sc7180_bus_clk_names),
-	.io_start = { 0xae94000 },
+	.io_start = {
+		{ 0xae94000 },
+	},
 	.num_dsi = 1,
 };
 
@@ -223,7 +245,9 @@ static const struct msm_dsi_config sc7280_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(sc7280_dsi_regulators),
 	.bus_clk_names = dsi_sc7280_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names),
-	.io_start = { 0xae94000, 0xae96000 },
+	.io_start = {
+		{ 0xae94000, 0xae96000 },
+	},
 	.num_dsi = 2,
 };
 
@@ -241,7 +265,9 @@ static const struct msm_dsi_config qcm2290_dsi_cfg = {
 	.num_regulators = ARRAY_SIZE(qcm2290_dsi_cfg_regulators),
 	.bus_clk_names = dsi_qcm2290_bus_clk_names,
 	.num_bus_clks = ARRAY_SIZE(dsi_qcm2290_bus_clk_names),
-	.io_start = { 0x5e94000 },
+	.io_start = {
+		{ 0x5e94000 },
+	},
 	.num_dsi = 1,
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
index 44be4a88aa83..df9f09876ccb 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
@@ -32,13 +32,16 @@
 
 #define DSI_6G_REG_SHIFT	4
 
+/* Maximum number of configurations matched against the same hw revision */
+#define VARIANTS_MAX			2
+
 struct msm_dsi_config {
 	u32 io_offset;
 	const struct regulator_bulk_data *regulator_data;
 	int num_regulators;
 	const char * const *bus_clk_names;
 	const int num_bus_clks;
-	const resource_size_t io_start[DSI_MAX];
+	const resource_size_t io_start[VARIANTS_MAX][DSI_MAX];
 	const int num_dsi;
 };
 
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 18fa30e1e858..22ba8726b0ea 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -1869,7 +1869,7 @@ static int dsi_host_get_id(struct msm_dsi_host *msm_host)
 		return -EINVAL;
 
 	for (i = 0; i < cfg->num_dsi; i++) {
-		if (cfg->io_start[i] == res->start)
+		if (cfg->io_start[0][i] == res->start)
 			return i;
 	}
 
-- 
2.39.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ