lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <6dfb39f9-cdc7-62a0-6ba7-dd8fa33d4d44@linaro.org>
Date:   Mon, 13 Feb 2023 10:16:30 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        linux-arm-msm@...r.kernel.org, andersson@...nel.org,
        agross@...nel.org, krzysztof.kozlowski@...aro.org
Cc:     marijn.suijten@...ainline.org, Rob Clark <robdclark@...il.com>,
        Abhinav Kumar <quic_abhinavk@...cinc.com>,
        Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Douglas Anderson <dianders@...omium.org>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Loic Poulain <loic.poulain@...aro.org>,
        Vinod Koul <vkoul@...nel.org>,
        Vladimir Lypak <vladimir.lypak@...il.com>,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 02/10] drm/msm/dsi: Turn msm_dsi_config::io_start into a
 2d array



On 11.02.2023 14:17, Dmitry Baryshkov wrote:
> On 11/02/2023 13:51, Konrad Dybcio wrote:
>> Currently, we allow for MAX_DSI entries in io_start to facilitate for
>> MAX_DSI number of DSI hosts at different addresses. The configuration
>> is matched against the DSI CTRL hardware revision read back from the
>> component. We need a way to resolve situations where multiple SoCs
>> with different register maps may use the same version of DSI CTRL. In
>> preparation to do so, make msm_dsi_config a 2d array where each entry
>> represents a set of configurations adequate for a given SoC.
>>
>> This is totally fine to do, as the only differentiating factors
>> between same-version-different-SoCs configurations are the number of
>> DSI hosts (1 or 2, at least as of today) and the set of registers.
> 
> s/set of registers/starting address/ ?
Well, *technically* they both are accurate, as having the same DSI
HW at the same base address implies the entire DSI host address space
is the same.. But I can clean this up.

Konrad
> 
>> The regulator setup is the same, because the DSI hardware is the same,
>> regardless of the SoC it was implemented in.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_cfg.c  | 52 ++++++++++++++++++++++--------
>>   drivers/gpu/drm/msm/dsi/dsi_cfg.h  |  5 ++-
>>   drivers/gpu/drm/msm/dsi/dsi_host.c |  2 +-
>>   3 files changed, 44 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
>> index 6d21f0b33411..068d45b3a8f0 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
>> @@ -21,7 +21,9 @@ static const struct msm_dsi_config apq8064_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(apq8064_dsi_regulators),
>>       .bus_clk_names = dsi_v2_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_v2_bus_clk_names),
>> -    .io_start = { 0x4700000, 0x5800000 },
>> +    .io_start = {
>> +        { 0x4700000, 0x5800000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -41,7 +43,9 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(msm8974_apq8084_regulators),
>>       .bus_clk_names = dsi_6g_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
>> -    .io_start = { 0xfd922800, 0xfd922b00 },
>> +    .io_start = {
>> +        { 0xfd922800, 0xfd922b00 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -60,7 +64,9 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(msm8916_dsi_regulators),
>>       .bus_clk_names = dsi_8916_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_8916_bus_clk_names),
>> -    .io_start = { 0x1a98000 },
>> +    .io_start = {
>> +        { 0x1a98000 },
>> +    },
>>       .num_dsi = 1,
>>   };
>>   @@ -79,7 +85,9 @@ static const struct msm_dsi_config msm8976_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(msm8976_dsi_regulators),
>>       .bus_clk_names = dsi_8976_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_8976_bus_clk_names),
>> -    .io_start = { 0x1a94000, 0x1a96000 },
>> +    .io_start = {
>> +        { 0x1a94000, 0x1a96000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -98,7 +106,9 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(msm8994_dsi_regulators),
>>       .bus_clk_names = dsi_6g_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_6g_bus_clk_names),
>> -    .io_start = { 0xfd998000, 0xfd9a0000 },
>> +    .io_start = {
>> +        { 0xfd998000, 0xfd9a0000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -118,7 +128,9 @@ static const struct msm_dsi_config msm8996_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(msm8996_dsi_regulators),
>>       .bus_clk_names = dsi_8996_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_8996_bus_clk_names),
>> -    .io_start = { 0x994000, 0x996000 },
>> +    .io_start = {
>> +        { 0x994000, 0x996000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -137,7 +149,9 @@ static const struct msm_dsi_config msm8998_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(msm8998_dsi_regulators),
>>       .bus_clk_names = dsi_msm8998_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_msm8998_bus_clk_names),
>> -    .io_start = { 0xc994000, 0xc996000 },
>> +    .io_start = {
>> +        { 0xc994000, 0xc996000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -155,7 +169,9 @@ static const struct msm_dsi_config sdm660_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(sdm660_dsi_regulators),
>>       .bus_clk_names = dsi_sdm660_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_sdm660_bus_clk_names),
>> -    .io_start = { 0xc994000, 0xc996000 },
>> +    .io_start = {
>> +        { 0xc994000, 0xc996000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -177,7 +193,9 @@ static const struct msm_dsi_config sdm845_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(sdm845_dsi_regulators),
>>       .bus_clk_names = dsi_sdm845_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
>> -    .io_start = { 0xae94000, 0xae96000 },
>> +    .io_start = {
>> +        { 0xae94000, 0xae96000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -191,7 +209,9 @@ static const struct msm_dsi_config sm8550_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(sm8550_dsi_regulators),
>>       .bus_clk_names = dsi_sdm845_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_sdm845_bus_clk_names),
>> -    .io_start = { 0xae94000, 0xae96000 },
>> +    .io_start = {
>> +        { 0xae94000, 0xae96000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -205,7 +225,9 @@ static const struct msm_dsi_config sc7180_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(sc7180_dsi_regulators),
>>       .bus_clk_names = dsi_sc7180_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_sc7180_bus_clk_names),
>> -    .io_start = { 0xae94000 },
>> +    .io_start = {
>> +        { 0xae94000 },
>> +    },
>>       .num_dsi = 1,
>>   };
>>   @@ -223,7 +245,9 @@ static const struct msm_dsi_config sc7280_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(sc7280_dsi_regulators),
>>       .bus_clk_names = dsi_sc7280_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names),
>> -    .io_start = { 0xae94000, 0xae96000 },
>> +    .io_start = {
>> +        { 0xae94000, 0xae96000 },
>> +    },
>>       .num_dsi = 2,
>>   };
>>   @@ -241,7 +265,9 @@ static const struct msm_dsi_config qcm2290_dsi_cfg = {
>>       .num_regulators = ARRAY_SIZE(qcm2290_dsi_cfg_regulators),
>>       .bus_clk_names = dsi_qcm2290_bus_clk_names,
>>       .num_bus_clks = ARRAY_SIZE(dsi_qcm2290_bus_clk_names),
>> -    .io_start = { 0x5e94000 },
>> +    .io_start = {
>> +        { 0x5e94000 },
>> +    },
>>       .num_dsi = 1,
>>   };
>>   diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.h b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>> index 44be4a88aa83..df9f09876ccb 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.h
>> @@ -32,13 +32,16 @@
>>     #define DSI_6G_REG_SHIFT    4
>>   +/* Maximum number of configurations matched against the same hw revision */
>> +#define VARIANTS_MAX            2
>> +
>>   struct msm_dsi_config {
>>       u32 io_offset;
>>       const struct regulator_bulk_data *regulator_data;
>>       int num_regulators;
>>       const char * const *bus_clk_names;
>>       const int num_bus_clks;
>> -    const resource_size_t io_start[DSI_MAX];
>> +    const resource_size_t io_start[VARIANTS_MAX][DSI_MAX];
>>       const int num_dsi;
>>   };
>>   diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 18fa30e1e858..22ba8726b0ea 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -1869,7 +1869,7 @@ static int dsi_host_get_id(struct msm_dsi_host *msm_host)
>>           return -EINVAL;
>>         for (i = 0; i < cfg->num_dsi; i++) {
>> -        if (cfg->io_start[i] == res->start)
>> +        if (cfg->io_start[0][i] == res->start)
>>               return i;
>>       }
>>   
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ