[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y+s/HP+v7lx2SKRj@ubun2204.myguest.virtualbox.org>
Date: Tue, 14 Feb 2023 13:28:20 +0530
From: Deepak R Varma <drv@...lo.com>
To: Jacob Bai <jacob.bai.au@...il.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] staging: pi433: change (struct pi433_tx_cfg)->bit_rate
to be a u32
On Tue, Feb 14, 2023 at 05:33:46PM +1100, Jacob Bai wrote:
> Based on the TODO file and datasheet of pi433, the maximum bit rate for
> transmitter is 300kbps when modulation been set to FSK. Hence, the size
> should be u32 rather than u16.
Hi Jacob,
This change was already discussed recently. Please check the following link and
all the responses to this thread:
https://lore.kernel.org/all/Y9h42l%2F8EcPqn63x@combine-ThinkPad-S1-Yoga/
Thanks,
./drv
>
> Signed-off-by: Jacob Bai <jacob.bai.au@...il.com>
> ---
> drivers/staging/pi433/Documentation/pi433.txt | 3 ++-
> drivers/staging/pi433/pi433_if.h | 2 +-
> drivers/staging/pi433/rf69.c | 4 ++--
> drivers/staging/pi433/rf69.h | 2 +-
> 4 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/staging/pi433/Documentation/pi433.txt b/drivers/staging/pi433/Documentation/pi433.txt
> index 4a0d34b4ad37..b34d8e9f6d53 100644
> --- a/drivers/staging/pi433/Documentation/pi433.txt
> +++ b/drivers/staging/pi433/Documentation/pi433.txt
> @@ -78,7 +78,8 @@ rf params:
> Allowed values: 433050000...434790000
> bit_rate
> bit rate used for transmission.
> - Allowed values: #####
> + Allowed values when FSK: 1200...300000
> + Allowed values when OOK: 1200...32768
> dev_frequency
> frequency deviation in case of FSK.
> Allowed values: 600...500000
> diff --git a/drivers/staging/pi433/pi433_if.h b/drivers/staging/pi433/pi433_if.h
> index 25ee0b77a32c..1f8ffaf02d99 100644
> --- a/drivers/staging/pi433/pi433_if.h
> +++ b/drivers/staging/pi433/pi433_if.h
> @@ -51,7 +51,7 @@ enum option_on_off {
> #define PI433_TX_CFG_IOCTL_NR 0
> struct pi433_tx_cfg {
> __u32 frequency;
> - __u16 bit_rate;
> + __u32 bit_rate;
> __u32 dev_frequency;
> enum modulation modulation;
> enum mod_shaping mod_shaping;
> diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c
> index 8c7fab6a46bb..0b90ca004dd6 100644
> --- a/drivers/staging/pi433/rf69.c
> +++ b/drivers/staging/pi433/rf69.c
> @@ -185,7 +185,7 @@ int rf69_set_modulation_shaping(struct spi_device *spi,
> }
> }
>
> -int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate)
> +int rf69_set_bit_rate(struct spi_device *spi, u32 bit_rate)
> {
> int retval;
> u32 bit_rate_reg;
> @@ -201,7 +201,7 @@ int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate)
> }
>
> // check input value
> - if (bit_rate < 1200 || (mod == OOK && bit_rate > 32768)) {
> + if (bit_rate < 1200 || bit_rate > 300000 || (mod == OOK && bit_rate > 32768)) {
> dev_dbg(&spi->dev, "setBitRate: illegal input param\n");
> return -EINVAL;
> }
> diff --git a/drivers/staging/pi433/rf69.h b/drivers/staging/pi433/rf69.h
> index 78fa0b8bab8b..46a1fb2d5329 100644
> --- a/drivers/staging/pi433/rf69.h
> +++ b/drivers/staging/pi433/rf69.h
> @@ -24,7 +24,7 @@ int rf69_set_data_mode(struct spi_device *spi, u8 data_mode);
> int rf69_set_modulation(struct spi_device *spi, enum modulation modulation);
> int rf69_set_modulation_shaping(struct spi_device *spi,
> enum mod_shaping mod_shaping);
> -int rf69_set_bit_rate(struct spi_device *spi, u16 bit_rate);
> +int rf69_set_bit_rate(struct spi_device *spi, u32 bit_rate);
> int rf69_set_deviation(struct spi_device *spi, u32 deviation);
> int rf69_set_frequency(struct spi_device *spi, u32 frequency);
> int rf69_enable_amplifier(struct spi_device *spi, u8 amplifier_mask);
> --
> 2.34.1
>
>
Powered by blists - more mailing lists