| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <44ac5699-c42f-bb22-b92d-c0d0a54cced4@molgen.mpg.de>
Date: Thu, 16 Feb 2023 12:37:43 +0100
From: Paul Menzel <pmenzel@...gen.mpg.de>
To: Tim Jiang <quic_tjiang@...cinc.com>
Cc: marcel@...tmann.org, johan.hedberg@...il.com,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
linux-arm-msm@...r.kernel.org, quic_bgodavar@...cinc.com,
quic_hbandi@...cinc.com, quic_hemantg@...cinc.com, mka@...omium.org
Subject: Re: [PATCH v2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth
SoC QCA2066
Dear Tim,
Thank you for the patch.
Am 16.02.23 um 10:22 schrieb Tim Jiang:
> This patch adds support for QCA2066 firmware patch and nvm downloading.
(Nit: Imperative mood with *Add support …* would make it shorter, and is
recommended.)
Please elaborate a little. Please mention the datasheet name and
revision, and how it was tested.
> Signed-off-by: Tim Jiang <quic_tjiang@...cinc.com>
> ---
> drivers/bluetooth/btqca.c | 78 +++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h | 2 +
> drivers/bluetooth/hci_qca.c | 6 +++
> 3 files changed, 86 insertions(+)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index c9064d34d830..e1127532c5a8 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -205,6 +205,50 @@ static int qca_send_reset(struct hci_dev *hdev)
> return 0;
> }
>
> +static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
> +{
> + u8 cmd;
> + struct sk_buff *skb;
> + struct edl_event_hdr *edl;
> + int err = 0;
> + int bid_len;
> +
> + bt_dev_dbg(hdev, "QCA read board ID");
> +
> + cmd = EDL_GET_BID_REQ_CMD;
> + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
> + &cmd, 0, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Reading QCA board ID failed (%d)",
> + err);
Should fit in one line?
> + return err;
> + }
> +
> + edl = skb_pull_data(skb, sizeof(*edl));
> + if (!edl) {
> + bt_dev_err(hdev, "QCA read board ID with no header");
Please phrase these errors more user understandable. Maybe even with a
suggestion, how to fix it.
> + err = -EILSEQ;
> + goto out;
> + }
> +
> + if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
> + edl->rtype != EDL_GET_BID_REQ_CMD) {
> + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> + edl->rtype);
Same.
> + err = -EIO;
> + goto out;
> + }
> +
> + bid_len = edl->data[0];
> + *bid = (edl->data[1] << 8) + edl->data[2];
> + bt_dev_info(hdev, "%s: bid len = %x, bid = %x", __func__, bid_len, *bid);
> +
> +out:
> + kfree_skb(skb);
> + return err;
> +}
> +
> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> {
> struct sk_buff *skb;
> @@ -574,6 +618,31 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> }
> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>
> +static void qca_generate_nvm_name(struct hci_dev *hdev, char *fwname,
> + size_t max_size, struct qca_btsoc_version ver, u16 bid)
> +{
> + u8 rom_ver = 0;
> + u32 soc_ver;
> + const char *variant;
> +
> + soc_ver = get_soc_ver(ver.soc_id, ver.rom_ver);
> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
> +
> + if ((ver.soc_id & 0x0000ff00) == 0x1200) /*hsp gf chip*/
Missing spaces in the comment. Can macros/enums be used?
> + variant = "g";
> + else
> + variant = "";
> +
> + if (bid == 0x0) {
> + snprintf(fwname, max_size, "qca/hpnv%02x%s.bin", rom_ver, variant);
> + } else {
> + snprintf(fwname, max_size, "qca/hpnv%02x%s.%x",
> + rom_ver, variant, bid);
> + }
The coding style requires no spaces for oneline bodies.
> +
> + bt_dev_info(hdev, "%s: nvm name is %s", __func__, fwname);
> +}
> +
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> const char *firmware_name)
> @@ -582,6 +651,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> int err;
> u8 rom_ver = 0;
> u32 soc_ver;
> + u16 bid = 0;
Use boardid as name?
>
> bt_dev_dbg(hdev, "QCA setup on UART");
>
> @@ -607,6 +677,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> } else if (soc_type == QCA_QCA6390) {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/htbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_QCA2066) {
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/hpbtfw%02x.tlv", rom_ver);
> } else if (soc_type == QCA_WCN6750) {
> /* Choose mbn file by default.If mbn file is not found
Missing space after dot/period.
> * then choose tlv file
> @@ -628,6 +701,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> /* Give the controller some time to get ready to receive the NVM */
> msleep(10);
>
> + if (soc_type == QCA_QCA2066)
> + qca_read_fw_board_id(hdev, &bid);
> +
> /* Download NVM configuration */
> config.type = TLV_TYPE_NVM;
> if (firmware_name)
> @@ -645,6 +721,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> else if (soc_type == QCA_QCA6390)
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/htnv%02x.bin", rom_ver);
> + else if (soc_type == QCA_QCA2066)
> + qca_generate_nvm_name(hdev, config.fwname, sizeof(config.fwname), ver, bid);
Sort the branches lexicographically?
> else if (soc_type == QCA_WCN6750)
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/msnv%02x.bin", rom_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 61e9a50e66ae..e762c403284a 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -13,6 +13,7 @@
> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
> #define EDL_GET_BUILD_INFO_CMD (0x20)
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> +#define EDL_GET_BID_REQ_CMD (0x23)
> #define EDL_PATCH_CONFIG_CMD (0x28)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
> @@ -147,6 +148,7 @@ enum qca_btsoc_type {
> QCA_WCN3991,
> QCA_QCA6390,
> QCA_WCN6750,
> + QCA_QCA2066,
Sort it?
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 3df8c3606e93..84769089ddff 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1866,6 +1866,11 @@ static const struct qca_device_data qca_soc_data_qca6390 = {
> .num_vregs = 0,
> };
>
> +static const struct qca_device_data qca_soc_data_qca2066 = {
> + .soc_type = QCA_QCA2066,
> + .num_vregs = 0,
> +};
> +
> static const struct qca_device_data qca_soc_data_wcn6750 = {
> .soc_type = QCA_WCN6750,
> .vregs = (struct qca_vreg []) {
> @@ -2335,6 +2340,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
> + { .compatible = "qcom,qca2066-bt", .data = &qca_soc_data_qca2066},
Sort it?
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
Kind regards,
Paul
Powered by blists - more mailing lists