linux-kernel - [PATCH v3 0/2] Add watchdog driver for StarFive JH7110 RISC-V SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230220081926.267695-1-xingyu.wu@starfivetech.com>
Date:   Mon, 20 Feb 2023 16:19:24 +0800
From:   Xingyu Wu <xingyu.wu@...rfivetech.com>
To:     <linux-riscv@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-watchdog@...r.kernel.org>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Guenter Roeck <linux@...ck-us.net>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC:     Rob Herring <robh+dt@...nel.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Xingyu Wu <xingyu.wu@...rfivetech.com>,
        Samin Guo <samin.guo@...rfivetech.com>,
        <linux-kernel@...r.kernel.org>, Conor Dooley <conor@...nel.org>
Subject: [PATCH v3 0/2] Add watchdog driver for StarFive JH7110 RISC-V SoC

This patch serises are to add watchdog driver for the StarFive JH7110
RISC-V SoC. The first patch adds docunmentation to describe device
tree bindings. The subsequent patch adds watchdog driver and support
JH7110 SoC. And the addition of device tree node will be submitted
after the JH7110 dts merge. This patchset is based on 6.2.

The watchdog driver has been tested on the VisionFive 2 boards which
equip with JH7110 SoC and works normally.

Changes since v2: 
- Added watchdog.yaml and unevaluatedProperties in the dt-binding.
- Removed some unnecessary include files.
- Changed the 'module_param' name and dropped 'soft_noboot'.
- Rrmoved 'CONFIG_OF'.
- Added a check if clock rate is 0.
- Modified the max_timeout calculation formula.
- Removed restart function.
- Removed duplicate checks on the upper and lower bounds of 'count'.
- Removed 'started' variable.
- Added pm_runtime_get_sync() and pm_runtime_put_sync().
- Removed 'firmware_version = 0' variable.
- Drop the device tree node commit.

Changes since v1:
- Renamed the dt-binding 'starfive,wdt.yaml' to 'starfive,jh7110-wdt.yaml'.
- Dropped the '_clk' and 'rst_' about the 'clock-names' and 'reset-names'
  in the dt-binding.
- Updated the example context in the dt-binding 'starfive,jh7110-wdt.yaml'
  to be independent of other patchset.
- Deleted unused macros like 'JH7110_WDOG_INT_EN'.
- Changed the type of 'freq' in the struct from u64 to u32.
- Used 'devm_clk_get_enabled()' instead of 'devm_clk_get()' and
  'clk_prepare_enable()'.
- Removed the operation to get the frequency from the device tree.
- Added watchdog_stop_on_unregister() and watchdog_stop_on_reboot().
- Removed any operations about interrupt.

v2: https://lore.kernel.org/all/20221219094233.179153-1-xingyu.wu@starfivetech.com/
v1: https://lore.kernel.org/all/20221202093943.149674-1-xingyu.wu@starfivetech.com/

Xingyu Wu (2):
  dt-bindings: watchdog: Add watchdog for StarFive JH7110
  drivers: watchdog: Add StarFive Watchdog driver

 .../watchdog/starfive,jh7110-wdt.yaml         |  74 ++
 MAINTAINERS                                   |   7 +
 drivers/watchdog/Kconfig                      |   9 +
 drivers/watchdog/Makefile                     |   2 +
 drivers/watchdog/starfive-wdt.c               | 651 ++++++++++++++++++
 5 files changed, 743 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/starfive,jh7110-wdt.yaml
 create mode 100644 drivers/watchdog/starfive-wdt.c


base-commit: c9c3395d5e3dcc6daee66c6908354d47bf98cb0c
-- 
2.25.1