Message-Id: <20230221034021.15121-5-dtsen@linux.ibm.com>
Date:   Mon, 20 Feb 2023 22:40:19 -0500
From:   Danny Tsen <dtsen@...ux.ibm.com>
To:     linux-crypto@...r.kernel.org
Cc:     herbert@...dor.apana.org.au, leitao@...ian.org,
        nayna@...ux.ibm.com, appro@...ptogams.org,
        linux-kernel@...r.kernel.org, ltcgcw@...ux.vnet.ibm.com,
        dtsen@...ibm.com, Danny Tsen <dtsen@...ux.ibm.com>
Subject: [RESEND PATCH v4 4/6] Supporting functions for ghash.

This perl code is taken from the OpenSSL project and added gcm_init_htable function
used in the aes-gcm-p10-glue.c code to initialize hash table.  gcm_hash_p8 is used
to hash encrypted data blocks.

Signed-off-by: Danny Tsen <dtsen@...ux.ibm.com>
---
 arch/powerpc/crypto/ghashp8-ppc.pl | 370 +++++++++++++++++++++++++++++
 1 file changed, 370 insertions(+)
 create mode 100644 arch/powerpc/crypto/ghashp8-ppc.pl

diff --git a/arch/powerpc/crypto/ghashp8-ppc.pl b/arch/powerpc/crypto/ghashp8-ppc.pl
new file mode 100644
index 000000000000..b56603b4a893
--- /dev/null
+++ b/arch/powerpc/crypto/ghashp8-ppc.pl
@@ -0,0 +1,370 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# This code is taken from the OpenSSL project but the author (Andy Polyakov)
+# has relicensed it under the GPLv2. Therefore this program is free software;
+# you can redistribute it and/or modify it under the terms of the GNU General
+# Public License version 2 as published by the Free Software Foundation.
+#
+# The original headers, including the original license headers, are
+# included below for completeness.
+
+# ====================================================================
+# Written by Andy Polyakov <appro@...nssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see https://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# GHASH for PowerISA v2.07.
+#
+# July 2014
+#
+# Accurate performance measurements are problematic, because it's
+# always virtualized setup with possibly throttled processor.
+# Relative comparison is therefore more informative. This initial
+# version is ~2.1x slower than hardware-assisted AES-128-CTR, ~12x
+# faster than "4-bit" integer-only compiler-generated 64-bit code.
+# "Initial version" means that there is room for futher improvement.
+
+$flavour=shift;
+$output =shift;
+
+if ($flavour =~ /64/) {
+	$SIZE_T=8;
+	$LRSAVE=2*$SIZE_T;
+	$STU="stdu";
+	$POP="ld";
+	$PUSH="std";
+} elsif ($flavour =~ /32/) {
+	$SIZE_T=4;
+	$LRSAVE=$SIZE_T;
+	$STU="stwu";
+	$POP="lwz";
+	$PUSH="stw";
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
+
+my ($Xip,$Htbl,$inp,$len)=map("r$_",(3..6));	# argument block
+
+my ($Xl,$Xm,$Xh,$IN)=map("v$_",(0..3));
+my ($zero,$t0,$t1,$t2,$xC2,$H,$Hh,$Hl,$lemask)=map("v$_",(4..12));
+my ($Xl1,$Xm1,$Xh1,$IN1,$H2,$H2h,$H2l)=map("v$_",(13..19));
+my $vrsave="r12";
+my ($t4,$t5,$t6) = ($Hl,$H,$Hh);
+
+$code=<<___;
+.machine	"any"
+
+.text
+
+.globl	.gcm_init_p8
+	lis		r0,0xfff0
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$H,0,r4			# load H
+	le?xor		r7,r7,r7
+	le?addi		r7,r7,0x8		# need a vperm start with 08
+	le?lvsr		5,0,r7
+	le?vspltisb	6,0x0f
+	le?vxor		5,5,6			# set a b-endian mask
+	le?vperm	$H,$H,$H,5
+
+	vspltisb	$xC2,-16		# 0xf0
+	vspltisb	$t0,1			# one
+	vaddubm		$xC2,$xC2,$xC2		# 0xe0
+	vxor		$zero,$zero,$zero
+	vor		$xC2,$xC2,$t0		# 0xe1
+	vsldoi		$xC2,$xC2,$zero,15	# 0xe1...
+	vsldoi		$t1,$zero,$t0,1		# ...1
+	vaddubm		$xC2,$xC2,$xC2		# 0xc2...
+	vspltisb	$t2,7
+	vor		$xC2,$xC2,$t1		# 0xc2....01
+	vspltb		$t1,$H,0		# most significant byte
+	vsl		$H,$H,$t0		# H<<=1
+	vsrab		$t1,$t1,$t2		# broadcast carry bit
+	vand		$t1,$t1,$xC2
+	vxor		$H,$H,$t1		# twisted H
+
+	vsldoi		$H,$H,$H,8		# twist even more ...
+	vsldoi		$xC2,$zero,$xC2,8	# 0xc2.0
+	vsldoi		$Hl,$zero,$H,8		# ... and split
+	vsldoi		$Hh,$H,$zero,8
+
+	stvx_u		$xC2,0,r3		# save pre-computed table
+	stvx_u		$Hl,r8,r3
+	stvx_u		$H, r9,r3
+	stvx_u		$Hh,r10,r3
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,2,0
+	.long		0
+.size	.gcm_init_p8,.-.gcm_init_p8
+
+.globl	.gcm_init_htable
+	lis		r0,0xfff0
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$H,0,r4			# load H
+
+	vspltisb	$xC2,-16		# 0xf0
+	vspltisb	$t0,1			# one
+	vaddubm		$xC2,$xC2,$xC2		# 0xe0
+	vxor		$zero,$zero,$zero
+	vor		$xC2,$xC2,$t0		# 0xe1
+	vsldoi		$xC2,$xC2,$zero,15	# 0xe1...
+	vsldoi		$t1,$zero,$t0,1		# ...1
+	vaddubm		$xC2,$xC2,$xC2		# 0xc2...
+	vspltisb	$t2,7
+	vor		$xC2,$xC2,$t1		# 0xc2....01
+	vspltb		$t1,$H,0		# most significant byte
+	vsl		$H,$H,$t0		# H<<=1
+	vsrab		$t1,$t1,$t2		# broadcast carry bit
+	vand		$t1,$t1,$xC2
+	vxor		$IN,$H,$t1		# twisted H
+
+	vsldoi		$H,$IN,$IN,8		# twist even more ...
+	vsldoi		$xC2,$zero,$xC2,8	# 0xc2.0
+	vsldoi		$Hl,$zero,$H,8		# ... and split
+	vsldoi		$Hh,$H,$zero,8
+
+	stvx_u		$xC2,0,r3		# save pre-computed table
+	stvx_u		$Hl,r8,r3
+	li		r8,0x40
+	stvx_u		$H, r9,r3
+	li		r9,0x50
+	stvx_u		$Hh,r10,r3
+	li		r10,0x60
+
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·H.lo
+	vpmsumd		$Xm,$IN,$H		# H.hi·H.lo+H.lo·H.hi
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·H.hi
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st reduction phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	vxor		$Xl,$Xl,$t2
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd reduction phase
+	vpmsumd		$Xl,$Xl,$xC2
+	vxor		$t1,$t1,$Xh
+	vxor		$IN1,$Xl,$t1
+
+	vsldoi		$H2,$IN1,$IN1,8
+	vsldoi		$H2l,$zero,$H2,8
+	vsldoi		$H2h,$H2,$zero,8
+
+	stvx_u		$H2l,r8,r3		# save H^2
+	li		r8,0x70
+	stvx_u		$H2,r9,r3
+	li		r9,0x80
+	stvx_u		$H2h,r10,r3
+	li		r10,0x90
+
+	vpmsumd		$Xl,$IN,$H2l		# H.lo·H^2.lo
+	 vpmsumd	$Xl1,$IN1,$H2l		# H^2.lo·H^2.lo
+	vpmsumd		$Xm,$IN,$H2		# H.hi·H^2.lo+H.lo·H^2.hi
+	 vpmsumd	$Xm1,$IN1,$H2		# H^2.hi·H^2.lo+H^2.lo·H^2.hi
+	vpmsumd		$Xh,$IN,$H2h		# H.hi·H^2.hi
+	 vpmsumd	$Xh1,$IN1,$H2h		# H^2.hi·H^2.hi
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st reduction phase
+	 vpmsumd	$t6,$Xl1,$xC2		# 1st reduction phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	 vsldoi		$t4,$Xm1,$zero,8
+	 vsldoi		$t5,$zero,$Xm1,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+	 vxor		$Xl1,$Xl1,$t4
+	 vxor		$Xh1,$Xh1,$t5
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	 vsldoi		$Xl1,$Xl1,$Xl1,8
+	vxor		$Xl,$Xl,$t2
+	 vxor		$Xl1,$Xl1,$t6
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd reduction phase
+	 vsldoi		$t5,$Xl1,$Xl1,8		# 2nd reduction phase
+	vpmsumd		$Xl,$Xl,$xC2
+	 vpmsumd	$Xl1,$Xl1,$xC2
+	vxor		$t1,$t1,$Xh
+	 vxor		$t5,$t5,$Xh1
+	vxor		$Xl,$Xl,$t1
+	 vxor		$Xl1,$Xl1,$t5
+
+	vsldoi		$H,$Xl,$Xl,8
+	 vsldoi		$H2,$Xl1,$Xl1,8
+	vsldoi		$Hl,$zero,$H,8
+	vsldoi		$Hh,$H,$zero,8
+	 vsldoi		$H2l,$zero,$H2,8
+	 vsldoi		$H2h,$H2,$zero,8
+
+	stvx_u		$Hl,r8,r3		# save H^3
+	li		r8,0xa0
+	stvx_u		$H,r9,r3
+	li		r9,0xb0
+	stvx_u		$Hh,r10,r3
+	li		r10,0xc0
+	 stvx_u		$H2l,r8,r3		# save H^4
+	 stvx_u		$H2,r9,r3
+	 stvx_u		$H2h,r10,r3
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,2,0
+	.long		0
+.size	.gcm_init_htable,.-.gcm_init_htable
+
+.globl	.gcm_gmult_p8
+	lis		r0,0xfff8
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$IN,0,$Xip		# load Xi
+
+	lvx_u		$Hl,r8,$Htbl		# load pre-computed table
+	 le?lvsl	$lemask,r0,r0
+	lvx_u		$H, r9,$Htbl
+	 le?vspltisb	$t0,0x07
+	lvx_u		$Hh,r10,$Htbl
+	 le?vxor	$lemask,$lemask,$t0
+	lvx_u		$xC2,0,$Htbl
+	 le?vperm	$IN,$IN,$IN,$lemask
+	vxor		$zero,$zero,$zero
+
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
+	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	vxor		$Xl,$Xl,$t2
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd phase
+	vpmsumd		$Xl,$Xl,$xC2
+	vxor		$t1,$t1,$Xh
+	vxor		$Xl,$Xl,$t1
+
+	le?vperm	$Xl,$Xl,$Xl,$lemask
+	stvx_u		$Xl,0,$Xip		# write out Xi
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,2,0
+	.long		0
+.size	.gcm_gmult_p8,.-.gcm_gmult_p8
+
+.globl	.gcm_ghash_p8
+	lis		r0,0xfff8
+	li		r8,0x10
+	mfspr		$vrsave,256
+	li		r9,0x20
+	mtspr		256,r0
+	li		r10,0x30
+	lvx_u		$Xl,0,$Xip		# load Xi
+
+	lvx_u		$Hl,r8,$Htbl		# load pre-computed table
+	 le?lvsl	$lemask,r0,r0
+	lvx_u		$H, r9,$Htbl
+	 le?vspltisb	$t0,0x07
+	lvx_u		$Hh,r10,$Htbl
+	 le?vxor	$lemask,$lemask,$t0
+	lvx_u		$xC2,0,$Htbl
+	 le?vperm	$Xl,$Xl,$Xl,$lemask
+	vxor		$zero,$zero,$zero
+
+	lvx_u		$IN,0,$inp
+	addi		$inp,$inp,16
+	subi		$len,$len,16
+	 le?vperm	$IN,$IN,$IN,$lemask
+	vxor		$IN,$IN,$Xl
+	b		Loop
+
+.align	5
+Loop:
+	 subic		$len,$len,16
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
+	 subfe.		r0,r0,r0		# borrow?-1:0
+	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
+	 and		r0,r0,$len
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
+	 add		$inp,$inp,r0
+
+	vpmsumd		$t2,$Xl,$xC2		# 1st phase
+
+	vsldoi		$t0,$Xm,$zero,8
+	vsldoi		$t1,$zero,$Xm,8
+	vxor		$Xl,$Xl,$t0
+	vxor		$Xh,$Xh,$t1
+
+	vsldoi		$Xl,$Xl,$Xl,8
+	vxor		$Xl,$Xl,$t2
+	 lvx_u		$IN,0,$inp
+	 addi		$inp,$inp,16
+
+	vsldoi		$t1,$Xl,$Xl,8		# 2nd phase
+	vpmsumd		$Xl,$Xl,$xC2
+	 le?vperm	$IN,$IN,$IN,$lemask
+	vxor		$t1,$t1,$Xh
+	vxor		$IN,$IN,$t1
+	vxor		$IN,$IN,$Xl
+	beq		Loop			# did $len-=16 borrow?
+
+	vxor		$Xl,$Xl,$t1
+	le?vperm	$Xl,$Xl,$Xl,$lemask
+	stvx_u		$Xl,0,$Xip		# write out Xi
+
+	mtspr		256,$vrsave
+	blr
+	.long		0
+	.byte		0,12,0x14,0,0,0,4,0
+	.long		0
+.size	.gcm_ghash_p8,.-.gcm_ghash_p8
+
+.asciz  "GHASH for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
+.align  2
+___
+
+foreach (split("\n",$code)) {
+	if ($flavour =~ /le$/o) {	# little-endian
+	    s/le\?//o		or
+	    s/be\?/#be#/o;
+	} else {
+	    s/le\?/#le#/o	or
+	    s/be\?//o;
+	}
+	print $_,"\n";
+}
+
+close STDOUT; # enforce flush
-- 
2.31.1

Powered by blists - more mailing lists