[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230221034021.15121-4-dtsen@linux.ibm.com>
Date: Mon, 20 Feb 2023 22:40:18 -0500
From: Danny Tsen <dtsen@...ux.ibm.com>
To: linux-crypto@...r.kernel.org
Cc: herbert@...dor.apana.org.au, leitao@...ian.org,
nayna@...ux.ibm.com, appro@...ptogams.org,
linux-kernel@...r.kernel.org, ltcgcw@...ux.vnet.ibm.com,
dtsen@...ibm.com, Danny Tsen <dtsen@...ux.ibm.com>
Subject: [RESEND PATCH v4 3/6] Supporting functions for AES.
This code is taken from CRYPTOGAMs[1]. The following functions are used,
aes_p8_set_encrypt_key is used to generate AES round keys and aes_p8_encrypt is used
to encrypt single block.
Signed-off-by: Danny Tsen <dtsen@...ux.ibm.com>
---
arch/powerpc/crypto/aesp8-ppc.pl | 585 +++++++++++++++++++++++++++++++
1 file changed, 585 insertions(+)
create mode 100644 arch/powerpc/crypto/aesp8-ppc.pl
diff --git a/arch/powerpc/crypto/aesp8-ppc.pl b/arch/powerpc/crypto/aesp8-ppc.pl
new file mode 100644
index 000000000000..1f22aec27d79
--- /dev/null
+++ b/arch/powerpc/crypto/aesp8-ppc.pl
@@ -0,0 +1,585 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# This code is taken from CRYPTOGAMs[1] and is included here using the option
+# in the license to distribute the code under the GPL. Therefore this program
+# is free software; you can redistribute it and/or modify it under the terms of
+# the GNU General Public License version 2 as published by the Free Software
+# Foundation.
+#
+# [1] https://www.openssl.org/~appro/cryptogams/
+
+# Copyright (c) 2006-2017, CRYPTOGAMS by <appro@...nssl.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain copyright notices,
+# this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following
+# disclaimer in the documentation and/or other materials
+# provided with the distribution.
+#
+# * Neither the name of the CRYPTOGAMS nor the names of its
+# copyright holder and contributors may be used to endorse or
+# promote products derived from this software without specific
+# prior written permission.
+#
+# ALTERNATIVELY, provided that this notice is retained in full, this
+# product may be distributed under the terms of the GNU General Public
+# License (GPL), in which case the provisions of the GPL apply INSTEAD OF
+# those given above.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# ====================================================================
+# Written by Andy Polyakov <appro@...nssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see https://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements support for AES instructions as per PowerISA
+# specification version 2.07, first implemented by POWER8 processor.
+# The module is endian-agnostic in sense that it supports both big-
+# and little-endian cases. Data alignment in parallelizable modes is
+# handled with VSX loads and stores, which implies MSR.VSX flag being
+# set. It should also be noted that ISA specification doesn't prohibit
+# alignment exceptions for these instructions on page boundaries.
+# Initially alignment was handled in pure AltiVec/VMX way [when data
+# is aligned programmatically, which in turn guarantees exception-
+# free execution], but it turned to hamper performance when vcipher
+# instructions are interleaved. It's reckoned that eventual
+# misalignment penalties at page boundaries are in average lower
+# than additional overhead in pure AltiVec approach.
+#
+# May 2016
+#
+# Add XTS subroutine, 9x on little- and 12x improvement on big-endian
+# systems were measured.
+#
+######################################################################
+# Current large-block performance in cycles per byte processed with
+# 128-bit key (less is better).
+#
+# CBC en-/decrypt CTR XTS
+# POWER8[le] 3.96/0.72 0.74 1.1
+# POWER8[be] 3.75/0.65 0.66 1.0
+
+$flavour = shift;
+
+if ($flavour =~ /64/) {
+ $SIZE_T =8;
+ $LRSAVE =2*$SIZE_T;
+ $STU ="stdu";
+ $POP ="ld";
+ $PUSH ="std";
+ $UCMP ="cmpld";
+ $SHL ="sldi";
+} elsif ($flavour =~ /32/) {
+ $SIZE_T =4;
+ $LRSAVE =$SIZE_T;
+ $STU ="stwu";
+ $POP ="lwz";
+ $PUSH ="stw";
+ $UCMP ="cmplw";
+ $SHL ="slwi";
+} else { die "nonsense $flavour"; }
+
+$LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$FRAME=8*$SIZE_T;
+$prefix="aes_p8";
+
+$sp="r1";
+$vrsave="r12";
+
+#########################################################################
+{{{ # Key setup procedures #
+my ($inp,$bits,$out,$ptr,$cnt,$rounds)=map("r$_",(3..8));
+my ($zero,$in0,$in1,$key,$rcon,$mask,$tmp)=map("v$_",(0..6));
+my ($stage,$outperm,$outmask,$outhead,$outtail)=map("v$_",(7..11));
+
+$code.=<<___;
+.machine "any"
+
+.text
+
+.align 7
+rcon:
+.long 0x01000000, 0x01000000, 0x01000000, 0x01000000 ?rev
+.long 0x1b000000, 0x1b000000, 0x1b000000, 0x1b000000 ?rev
+.long 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c ?rev
+.long 0,0,0,0 ?asis
+Lconsts:
+ mflr r0
+ bcl 20,31,\$+4
+ mflr $ptr #vvvvv "distance between . and rcon
+ addi $ptr,$ptr,-0x48
+ mtlr r0
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,0,0
+.asciz "AES for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
+
+.globl .${prefix}_set_encrypt_key
+Lset_encrypt_key:
+ mflr r11
+ $PUSH r11,$LRSAVE($sp)
+
+ li $ptr,-1
+ ${UCMP}i $inp,0
+ beq- Lenc_key_abort # if ($inp==0) return -1;
+ ${UCMP}i $out,0
+ beq- Lenc_key_abort # if ($out==0) return -1;
+ li $ptr,-2
+ cmpwi $bits,128
+ blt- Lenc_key_abort
+ cmpwi $bits,256
+ bgt- Lenc_key_abort
+ andi. r0,$bits,0x3f
+ bne- Lenc_key_abort
+
+ lis r0,0xfff0
+ mfspr $vrsave,256
+ mtspr 256,r0
+
+ bl Lconsts
+ mtlr r11
+
+ neg r9,$inp
+ lvx $in0,0,$inp
+ addi $inp,$inp,15 # 15 is not typo
+ lvsr $key,0,r9 # borrow $key
+ li r8,0x20
+ cmpwi $bits,192
+ lvx $in1,0,$inp
+ le?vspltisb $mask,0x0f # borrow $mask
+ lvx $rcon,0,$ptr
+ le?vxor $key,$key,$mask # adjust for byte swap
+ lvx $mask,r8,$ptr
+ addi $ptr,$ptr,0x10
+ vperm $in0,$in0,$in1,$key # align [and byte swap in LE]
+ li $cnt,8
+ vxor $zero,$zero,$zero
+ mtctr $cnt
+
+ ?lvsr $outperm,0,$out
+ vspltisb $outmask,-1
+ lvx $outhead,0,$out
+ ?vperm $outmask,$zero,$outmask,$outperm
+
+ blt Loop128
+ addi $inp,$inp,8
+ beq L192
+ addi $inp,$inp,8
+ b L256
+
+.align 4
+Loop128:
+ vperm $key,$in0,$in0,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in0,$in0,$key
+ bdnz Loop128
+
+ lvx $rcon,0,$ptr # last two round keys
+
+ vperm $key,$in0,$in0,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in0,$in0,$key
+
+ vperm $key,$in0,$in0,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vxor $in0,$in0,$key
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+
+ addi $inp,$out,15 # 15 is not typo
+ addi $out,$out,0x50
+
+ li $rounds,10
+ b Ldone
+
+.align 4
+L192:
+ lvx $tmp,0,$inp
+ li $cnt,4
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $out,$out,16
+ vperm $in1,$in1,$tmp,$key # align [and byte swap in LE]
+ vspltisb $key,8 # borrow $key
+ mtctr $cnt
+ vsububm $mask,$mask,$key # adjust the mask
+
+Loop192:
+ vperm $key,$in1,$in1,$mask # roate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vcipherlast $key,$key,$rcon
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+
+ vsldoi $stage,$zero,$in1,8
+ vspltw $tmp,$in0,3
+ vxor $tmp,$tmp,$in1
+ vsldoi $in1,$zero,$in1,12 # >>32
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in1,$in1,$tmp
+ vxor $in0,$in0,$key
+ vxor $in1,$in1,$key
+ vsldoi $stage,$stage,$in0,8
+
+ vperm $key,$in1,$in1,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$stage,$stage,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vsldoi $stage,$in0,$in1,8
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vperm $outtail,$stage,$stage,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vspltw $tmp,$in0,3
+ vxor $tmp,$tmp,$in1
+ vsldoi $in1,$zero,$in1,12 # >>32
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in1,$in1,$tmp
+ vxor $in0,$in0,$key
+ vxor $in1,$in1,$key
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $inp,$out,15 # 15 is not typo
+ addi $out,$out,16
+ bdnz Loop192
+
+ li $rounds,12
+ addi $out,$out,0x20
+ b Ldone
+
+.align 4
+L256:
+ lvx $tmp,0,$inp
+ li $cnt,7
+ li $rounds,14
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $out,$out,16
+ vperm $in1,$in1,$tmp,$key # align [and byte swap in LE]
+ mtctr $cnt
+
+Loop256:
+ vperm $key,$in1,$in1,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in1,$in1,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in0,$in0,$key
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $inp,$out,15 # 15 is not typo
+ addi $out,$out,16
+ bdz Ldone
+
+ vspltw $key,$in0,3 # just splat
+ vsldoi $tmp,$zero,$in1,12 # >>32
+ vsbox $key,$key
+
+ vxor $in1,$in1,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in1,$in1,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in1,$in1,$tmp
+
+ vxor $in1,$in1,$key
+ b Loop256
+
+.align 4
+Ldone:
+ lvx $in1,0,$inp # redundant in aligned case
+ vsel $in1,$outhead,$in1,$outmask
+ stvx $in1,0,$inp
+ li $ptr,0
+ mtspr 256,$vrsave
+ stw $rounds,0($out)
+
+Lenc_key_abort:
+ mr r3,$ptr
+ blr
+ .long 0
+ .byte 0,12,0x14,1,0,0,3,0
+ .long 0
+.size .${prefix}_set_encrypt_key,.-.${prefix}_set_encrypt_key
+
+.globl .${prefix}_set_decrypt_key
+ $STU $sp,-$FRAME($sp)
+ mflr r10
+ $PUSH r10,$FRAME+$LRSAVE($sp)
+ bl Lset_encrypt_key
+ mtlr r10
+
+ cmpwi r3,0
+ bne- Ldec_key_abort
+
+ slwi $cnt,$rounds,4
+ subi $inp,$out,240 # first round key
+ srwi $rounds,$rounds,1
+ add $out,$inp,$cnt # last round key
+ mtctr $rounds
+
+Ldeckey:
+ lwz r0, 0($inp)
+ lwz r6, 4($inp)
+ lwz r7, 8($inp)
+ lwz r8, 12($inp)
+ addi $inp,$inp,16
+ lwz r9, 0($out)
+ lwz r10,4($out)
+ lwz r11,8($out)
+ lwz r12,12($out)
+ stw r0, 0($out)
+ stw r6, 4($out)
+ stw r7, 8($out)
+ stw r8, 12($out)
+ subi $out,$out,16
+ stw r9, -16($inp)
+ stw r10,-12($inp)
+ stw r11,-8($inp)
+ stw r12,-4($inp)
+ bdnz Ldeckey
+
+ xor r3,r3,r3 # return value
+Ldec_key_abort:
+ addi $sp,$sp,$FRAME
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,0,3,0
+ .long 0
+.size .${prefix}_set_decrypt_key,.-.${prefix}_set_decrypt_key
+___
+}}}
+#########################################################################
+{{{ # Single block en- and decrypt procedures #
+sub gen_block () {
+my $dir = shift;
+my $n = $dir eq "de" ? "n" : "";
+my ($inp,$out,$key,$rounds,$idx)=map("r$_",(3..7));
+
+$code.=<<___;
+.globl .${prefix}_${dir}crypt
+ lwz $rounds,240($key)
+ lis r0,0xfc00
+ mfspr $vrsave,256
+ li $idx,15 # 15 is not typo
+ mtspr 256,r0
+
+ lvx v0,0,$inp
+ neg r11,$out
+ lvx v1,$idx,$inp
+ lvsl v2,0,$inp # inpperm
+ le?vspltisb v4,0x0f
+ ?lvsl v3,0,r11 # outperm
+ le?vxor v2,v2,v4
+ li $idx,16
+ vperm v0,v0,v1,v2 # align [and byte swap in LE]
+ lvx v1,0,$key
+ ?lvsl v5,0,$key # keyperm
+ srwi $rounds,$rounds,1
+ lvx v2,$idx,$key
+ addi $idx,$idx,16
+ subi $rounds,$rounds,1
+ ?vperm v1,v1,v2,v5 # align round key
+
+ vxor v0,v0,v1
+ lvx v1,$idx,$key
+ addi $idx,$idx,16
+ mtctr $rounds
+
+Loop_${dir}c:
+ ?vperm v2,v2,v1,v5
+ v${n}cipher v0,v0,v2
+ lvx v2,$idx,$key
+ addi $idx,$idx,16
+ ?vperm v1,v1,v2,v5
+ v${n}cipher v0,v0,v1
+ lvx v1,$idx,$key
+ addi $idx,$idx,16
+ bdnz Loop_${dir}c
+
+ ?vperm v2,v2,v1,v5
+ v${n}cipher v0,v0,v2
+ lvx v2,$idx,$key
+ ?vperm v1,v1,v2,v5
+ v${n}cipherlast v0,v0,v1
+
+ vspltisb v2,-1
+ vxor v1,v1,v1
+ li $idx,15 # 15 is not typo
+ ?vperm v2,v1,v2,v3 # outmask
+ le?vxor v3,v3,v4
+ lvx v1,0,$out # outhead
+ vperm v0,v0,v0,v3 # rotate [and byte swap in LE]
+ vsel v1,v1,v0,v2
+ lvx v4,$idx,$out
+ stvx v1,0,$out
+ vsel v0,v0,v4,v2
+ stvx v0,$idx,$out
+
+ mtspr 256,$vrsave
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,3,0
+ .long 0
+.size .${prefix}_${dir}crypt,.-.${prefix}_${dir}crypt
+___
+}
+&gen_block("en");
+&gen_block("de");
+}}}
+
+my $consts=1;
+foreach(split("\n",$code)) {
+ s/\`([^\`]*)\`/eval($1)/geo;
+
+ # constants table endian-specific conversion
+ if ($consts && m/\.(long|byte)\s+(.+)\s+(\?[a-z]*)$/o) {
+ my $conv=$3;
+ my @bytes=();
+
+ # convert to endian-agnostic format
+ if ($1 eq "long") {
+ foreach (split(/,\s*/,$2)) {
+ my $l = /^0/?oct:int;
+ push @bytes,($l>>24)&0xff,($l>>16)&0xff,($l>>8)&0xff,$l&0xff;
+ }
+ } else {
+ @bytes = map(/^0/?oct:int,split(/,\s*/,$2));
+ }
+
+ # little-endian conversion
+ if ($flavour =~ /le$/o) {
+ SWITCH: for($conv) {
+ /\?inv/ && do { @bytes=map($_^0xf,@bytes); last; };
+ /\?rev/ && do { @bytes=reverse(@bytes); last; };
+ }
+ }
+
+ #emit
+ print ".byte\t",join(',',map (sprintf("0x%02x",$_),@bytes)),"\n";
+ next;
+ }
+ $consts=0 if (m/Lconsts:/o); # end of table
+
+ # instructions prefixed with '?' are endian-specific and need
+ # to be adjusted accordingly...
+ if ($flavour =~ /le$/o) { # little-endian
+ s/le\?//o or
+ s/be\?/#be#/o or
+ s/\?lvsr/lvsl/o or
+ s/\?lvsl/lvsr/o or
+ s/\?(vperm\s+v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+)/$1$3$2$4/o or
+ s/\?(vsldoi\s+v[0-9]+,\s*)(v[0-9]+,)\s*(v[0-9]+,\s*)([0-9]+)/$1$3$2 16-$4/o or
+ s/\?(vspltw\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9])/$1$2 3-$3/o;
+ } else { # big-endian
+ s/le\?/#le#/o or
+ s/be\?//o or
+ s/\?([a-z]+)/$1/o;
+ }
+
+ print $_,"\n";
+}
+
+close STDOUT;
--
2.31.1
Powered by blists - more mailing lists