[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230224105906.16540-9-manivannan.sadhasivam@linaro.org>
Date: Fri, 24 Feb 2023 16:29:01 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: andersson@...nel.org, lpieralisi@...nel.org, robh@...nel.org,
kw@...ux.com, krzysztof.kozlowski+dt@...aro.org, vkoul@...nel.org
Cc: konrad.dybcio@...aro.org, bhelgaas@...gle.com, kishon@...nel.org,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v2 08/13] ARM: dts: qcom: sdx55: List the property values vertically
To align with the rest of the devicetree files and the relative properties,
let's list the values of properties such as {reg/clock/interrupt}-names
vertically.
Suggested-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index b411c4ae34c3..61fdd601fc26 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -393,7 +393,11 @@ pcie_ep: pcie-ep@...0000 {
<0x40001000 0x1000>,
<0x40200000 0x100000>,
<0x01c03000 0x3000>;
- reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "addr_space",
"mmio";
qcom,perst-regs = <&tcsr 0xb258 0xb270>;
@@ -405,12 +409,18 @@ pcie_ep: pcie-ep@...0000 {
<&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
<&gcc GCC_PCIE_SLEEP_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>;
- clock-names = "aux", "cfg", "bus_master", "bus_slave",
- "slave_q2a", "sleep", "ref";
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "sleep",
+ "ref";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "global", "doorbell";
+ interrupt-names = "global",
+ "doorbell";
reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
resets = <&gcc GCC_PCIE_BCR>;
@@ -434,7 +444,10 @@ pcie_phy: phy@...7000 {
<&gcc GCC_PCIE_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
<&gcc GCC_PCIE_RCHNG_PHY_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen";
resets = <&gcc GCC_PCIE_PHY_BCR>;
reset-names = "phy";
--
2.25.1
Powered by blists - more mailing lists