[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <600394e8-371e-59bc-8620-ef976b3b671b@irl.hu>
Date: Wed, 8 Mar 2023 19:20:50 +0100
From: Gergo Koteles <soyer@....hu>
To: Konrad Dybcio <konrad.dybcio@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sdm845-oneplus-common: add PN553 NFC
On 2023. 03. 07. 20:04, Gergo Koteles wrote:
> On 2023. 03. 07. 20:02, Konrad Dybcio wrote:
>>
>>
>> On 7.03.2023 19:59, Gergo Koteles wrote:
>>> The OnePlus 6/6T both have a NQ330 (PN553 + P73N2M0).
>>> The PN533 supported by the nxp-nci-i2c driver in mainline.
>>> It detects/reads NFC tags using "nfctool".
>>>
>>> Signed-off-by: Gergo Koteles <soyer@....hu>
>>> ---
>> Next time include a changelog below this --- line detailing
>> what changed between revisions.
>>
> Okey. Thanks for the suggestion and the review.
>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>>
>> Konrad
>>> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 39 +++++++++++++++++++
>>> 1 file changed, 39 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> index 64638ea94db7..5e45801031d8 100644
>>> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>>> @@ -380,6 +380,24 @@ zap-shader {
>>> };
>>> };
>>> +&i2c3 {
>>> + clock-frequency = <400000>;
>>> + status = "okay";
>>> +
>>> + nfc@28 {
>>> + compatible = "nxp,nxp-nci-i2c";
>>> + reg = <0x28>;
>>> +
>>> + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
>>> +
>>> + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
>>> + firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
>>> +
>>> + pinctrl-0 = <&nfc_int_active &nfc_enable_active
>>> &nfc_firmware_active>;
>>> + pinctrl-names = "default";
>>> + };
>>> +};
>>> +
>>> &i2c10 {
>>> status = "okay";
>>> clock-frequency = <100000>;
>>> @@ -753,6 +771,27 @@ &usb_1_hsphy {
>>> &tlmm {
>>> gpio-reserved-ranges = <0 4>, <81 4>;
>>> + nfc_int_active: nfc-int-active-state {
>>> + pins = "gpio63";
>>> + function = "gpio";
>>> + drive-strength = <2>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + nfc_enable_active: nfc-enable-active-state {
>>> + pins = "gpio12";
>>> + function = "gpio";
>>> + drive-strength = <2>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + nfc_firmware_active: nfc-firmware-active-state {
>>> + pins = "gpio62";
>>> + function = "gpio";
>>> + drive-strength = <2>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> tri_state_key_default: tri-state-key-default-state {
>>> pins = "gpio40", "gpio42", "gpio26";
>>> function = "gpio";
>
Hi,
Please disregard this patch. Although it can detect the tags and the
tags type, the full readout does not work. I will send a new version
when I figure out what's wrong.
Thanks
Powered by blists - more mailing lists