lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5aacecc9-e3e4-f229-350d-14d547b52578@linaro.org>
Date:   Wed, 8 Mar 2023 11:58:08 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Bartosz Golaszewski <brgl@...ev.pl>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH v4 6/9] arm64: dts: qcom: sa8775p-ride: enable the SPI
 node



On 8.03.2023 11:40, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> 
> Enable the SPI interface exposed on the sa8775p-ride development board.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index 5fdce8279537..d01ca3a9ee37 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -14,6 +14,7 @@ / {
>  	aliases {
>  		serial0 = &uart10;
>  		i2c18 = &i2c18;
> +		spi16 = &spi16;
>  	};
>  
>  	chosen {
> @@ -40,12 +41,25 @@ &sleep_clk {
>  	clock-frequency = <32764>;
>  };
>  
> +&spi16 {
> +	pinctrl-0 = <&qup_spi16_default>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
>  &tlmm {
>  	qup_uart10_default: qup-uart10-state {
>  		pins = "gpio46", "gpio47";
>  		function = "qup1_se3";
>  	};
>  
> +	qup_spi16_default: qup-spi16-state {
> +		pins = "gpio86", "gpio87", "gpio88", "gpio89";
Rather weird to have an identical configuration for all
MOSI/MISO/CS/CLK pins.. Please doublecheck

Konrad
> +		function = "qup2_se2";
> +		drive-strength = <6>;
> +		bias-disable;
> +	};
> +
>  	qup_i2c18_default: qup-i2c18-state {
>  		pins = "gpio95", "gpio96";
>  		function = "qup2_se4";

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ