linux-kernel - Re: [PATCH v2] rtc: abx80x: Don't warn about oscillator failure after PoR

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <2fb99be0-3dd4-3bee-caa9-774ce8e2cd4b@seco.com>
Date:   Mon, 13 Mar 2023 11:28:36 -0400
From:   Sean Anderson <sean.anderson@...o.com>
To:     Alessandro Zummo <a.zummo@...ertech.it>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        linux-rtc@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] rtc: abx80x: Don't warn about oscillator failure after
 PoR

On 12/22/22 16:58, Sean Anderson wrote:
> According to the datasheet, the "oscillator failure" bit is set
> 
>> ...on a power on reset, when both the system and battery voltages have
>> dropped below acceptable levels. It is also set if an Oscillator Failure
>> occurs....
> 
> From testing, this bit is also set if a software reset is initiated.
> 
> This bit has a confusing name; it really tells us whether the time data
> is valid. We clear it when writing the time. If it is still set, that
> means there is a persistent issue (such as an oscillator failure),
> instead of a transient one (such as power loss).
> 
> Because there are several other reasons which might cause this bit
> to be set (including booting for the first time or a battery failure),
> do not warn about oscillator failures willy-nilly. This may cause system
> integrators to waste time looking into the wrong line of investigation.
> 
> We continue to warn the user if the oscillator actually fails so they
> can e.g. replace the crystal. Additionally, this can help debug failed
> batteries, since you will see "Time data invalid" when enabling
> debugging.
> 
> Signed-off-by: Sean Anderson <sean.anderson@...o.com>
> ---
> Note that the following drivers all warn when they detect a problem with
> the oscillator:
> 
> drivers/rtc/rtc-ds1672.c
> drivers/rtc/rtc-pcf*.c
> drivers/rtc/rtc-rs5c*.c
> drivers/rtc/rtc-sc27xx.c
> 
> So warning about such an error has good precedent.
> 
> Changes in v2:
> - Use debug instead of info in the typical case (no battery)
> 
>  drivers/rtc/rtc-abx80x.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
> index 9b0138d07232..a8b0fa5565c7 100644
> --- a/drivers/rtc/rtc-abx80x.c
> +++ b/drivers/rtc/rtc-abx80x.c
> @@ -115,6 +115,7 @@ struct abx80x_priv {
>  	struct rtc_device *rtc;
>  	struct i2c_client *client;
>  	struct watchdog_device wdog;
> +	bool wrote_time;
>  };
>  
>  static int abx80x_write_config_key(struct i2c_client *client, u8 key)
> @@ -167,6 +168,7 @@ static int abx80x_enable_trickle_charger(struct i2c_client *client,
>  static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
>  {
>  	struct i2c_client *client = to_i2c_client(dev);
> +	struct abx80x_priv *priv = i2c_get_clientdata(client);
>  	unsigned char buf[8];
>  	int err, flags, rc_mode = 0;
>  
> @@ -181,7 +183,18 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
>  			return flags;
>  
>  		if (flags & ABX8XX_OSS_OF) {
> -			dev_err(dev, "Oscillator failure, data is invalid.\n");
> +			/*
> +			 * The OF bit can be set either because of a reset
> +			 * (PoR/Software reset) or because of an oscillator
> +			 * failure. Effectively, it indicates that the stored
> +			 * time is invalid. When we write the time, we clear
> +			 * this bit. If it stays set, then this indicates an
> +			 * oscillator failure.
> +			 */
> +			if (priv->wrote_time)
> +				dev_err(dev, "Oscillator failure\n");
> +			else
> +				dev_dbg(dev, "Time data invalid\n");
>  			return -EINVAL;
>  		}
>  	}
> @@ -207,6 +220,7 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
>  static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
>  {
>  	struct i2c_client *client = to_i2c_client(dev);
> +	struct abx80x_priv *priv = i2c_get_clientdata(client);
>  	unsigned char buf[8];
>  	int err, flags;
>  
> @@ -240,6 +254,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
>  		dev_err(&client->dev, "Unable to write oscillator status register\n");
>  		return err;
>  	}
> +	priv->wrote_time = true;
>  
>  	return 0;
>  }

ping?