[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230314220746.nplw4q6kdpzcll4a@intel.intel>
Date: Tue, 14 Mar 2023 23:07:46 +0100
From: Andi Shyti <andi.shyti@...nel.org>
To: Chris Packham <Chris.Packham@...iedtelesis.co.nz>
Cc: Andi Shyti <andi.shyti@...nel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Wolfram Sang <wsa@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Ryan Chen <ryan_chen@...eedtech.com>
Subject: Re: [PATCH v4 3/3] i2c: mpc: Use i2c-scl-clk-low-timeout-ms i2c
property
> Just to be a pain the subject line still says "ms"
I have changed hundreds of /ms/us/ in this last half an hour...
of course I forgot some :)
There is also one in the comment.
Thanks for spotting it, Chris!
Andi
> On 15/03/23 10:56, Andi Shyti wrote:
> > "fsl,timeout" is marked as deprecated and replaced by the
> > "i2c-scl-clk-low-timeout-us" i2c property.
> >
> > Use this latter and, in case it is missing, for back
> > compatibility, check whether we still have "fsl,timeout" defined.
> >
> > Signed-off-by: Andi Shyti <andi.shyti@...nel.org>
> > Reviewed-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
> > Tested-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
> > ---
> > drivers/i2c/busses/i2c-mpc.c | 12 +++++++++++-
> > 1 file changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> > index 87e5c1725750f..e8798f9c23fcc 100644
> > --- a/drivers/i2c/busses/i2c-mpc.c
> > +++ b/drivers/i2c/busses/i2c-mpc.c
> > @@ -843,8 +843,18 @@ static int fsl_i2c_probe(struct platform_device *op)
> > mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
> > }
> >
> > + /*
> > + * "fsl,timeout" has been marked as deprecated and, to maintain
> > + * backward compatibility, we will only look for it if
> > + * "i2c-scl-clk-low-timeout-ms" is not present.
> > + */
> > result = of_property_read_u32(op->dev.of_node,
> > - "fsl,timeout", &mpc_ops.timeout);
> > + "i2c-scl-clk-low-timeout-us",
> > + &mpc_ops.timeout);
> > + if (result == -EINVAL)
> > + result = of_property_read_u32(op->dev.of_node,
> > + "fsl,timeout", &mpc_ops.timeout);
> > +
> > if (!result) {
> > mpc_ops.timeout *= HZ / 1000000;
> > if (mpc_ops.timeout < 5)
Powered by blists - more mailing lists