[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230314221614.24205-1-andi.shyti@kernel.org>
Date: Tue, 14 Mar 2023 23:16:14 +0100
From: Andi Shyti <andi.shyti@...nel.org>
To: linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Wolfram Sang <wsa@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Chris Packham <chris.packham@...iedtelesis.co.nz>,
Ryan Chen <ryan_chen@...eedtech.com>,
Andi Shyti <andi.shyti@...nel.org>
Subject: [PATCH v5 3/3] i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c property
"fsl,timeout" is marked as deprecated and replaced by the
"i2c-scl-clk-low-timeout-us" i2c property.
Use this latter and, in case it is missing, for back
compatibility, check whether we still have "fsl,timeout" defined.
Signed-off-by: Andi Shyti <andi.shyti@...nel.org>
Reviewed-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
Hi,
this should be the only patch where I forgot an 'ms'.
It should be fixed now.
Thanks, Chris.
V4 -> v5
- replace /ms/us/ in the commit subject and in the comment.
drivers/i2c/busses/i2c-mpc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 87e5c1725750f..aec3ac387c579 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -843,8 +843,18 @@ static int fsl_i2c_probe(struct platform_device *op)
mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
}
+ /*
+ * "fsl,timeout" has been marked as deprecated and, to maintain
+ * backward compatibility, we will only look for it if
+ * "i2c-scl-clk-low-timeout-us" is not present.
+ */
result = of_property_read_u32(op->dev.of_node,
- "fsl,timeout", &mpc_ops.timeout);
+ "i2c-scl-clk-low-timeout-us",
+ &mpc_ops.timeout);
+ if (result == -EINVAL)
+ result = of_property_read_u32(op->dev.of_node,
+ "fsl,timeout", &mpc_ops.timeout);
+
if (!result) {
mpc_ops.timeout *= HZ / 1000000;
if (mpc_ops.timeout < 5)
--
2.39.2
Powered by blists - more mailing lists