| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230317185230.46189-1-andriy.shevchenko@linux.intel.com>
Date: Fri, 17 Mar 2023 20:52:30 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-fbdev@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Lee Jones <lee@...nel.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>, Helge Deller <deller@....de>
Subject: [PATCH v1 1/1] backlight: hx8357: Convert to agnostic GPIO API
The of_gpio.h is going to be removed. In preparation of that convert
the driver to the agnostic API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/gpio/gpiolib-of.c | 4 +-
drivers/video/backlight/hx8357.c | 74 ++++++++++----------------------
2 files changed, 24 insertions(+), 54 deletions(-)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 1436cdb5fa26..cdd536a391be 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -184,7 +184,7 @@ static void of_gpio_try_fixup_polarity(const struct device_node *np,
const char *propname;
bool active_high;
} gpios[] = {
-#if !IS_ENABLED(CONFIG_LCD_HX8357)
+#if IS_ENABLED(CONFIG_LCD_HX8357)
/*
* Himax LCD controllers used incorrectly named
* "gpios-reset" property and also specified wrong
@@ -452,7 +452,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np,
*/
const char *compatible;
} gpios[] = {
-#if !IS_ENABLED(CONFIG_LCD_HX8357)
+#if IS_ENABLED(CONFIG_LCD_HX8357)
/* Himax LCD controllers used "gpios-reset" */
{ "reset", "gpios-reset", "himax,hx8357" },
{ "reset", "gpios-reset", "himax,hx8369" },
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index 9b50bc96e00f..d7298376cf74 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -6,11 +6,11 @@
*/
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/lcd.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
#define HX8357_NUM_IM_PINS 3
@@ -83,11 +83,10 @@
#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
struct hx8357_data {
- unsigned im_pins[HX8357_NUM_IM_PINS];
- unsigned reset;
+ struct gpio_descs *im_pins;
+ struct gpio_desc *reset;
struct spi_device *spi;
int state;
- bool use_im_pins;
};
static u8 hx8357_seq_power[] = {
@@ -321,11 +320,11 @@ static void hx8357_lcd_reset(struct lcd_device *lcdev)
struct hx8357_data *lcd = lcd_get_data(lcdev);
/* Reset the screen */
- gpio_set_value(lcd->reset, 1);
+ gpiod_set_value(lcd->reset, 0);
usleep_range(10000, 12000);
- gpio_set_value(lcd->reset, 0);
+ gpiod_set_value(lcd->reset, 1);
usleep_range(10000, 12000);
- gpio_set_value(lcd->reset, 1);
+ gpiod_set_value(lcd->reset, 0);
/* The controller needs 120ms to recover from reset */
msleep(120);
@@ -340,10 +339,10 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
* Set the interface selection pins to SPI mode, with three
* wires
*/
- if (lcd->use_im_pins) {
- gpio_set_value_cansleep(lcd->im_pins[0], 1);
- gpio_set_value_cansleep(lcd->im_pins[1], 0);
- gpio_set_value_cansleep(lcd->im_pins[2], 1);
+ if (lcd->im_pins) {
+ gpiod_set_value_cansleep(lcd->im_pins->desc[0], 1);
+ gpiod_set_value_cansleep(lcd->im_pins->desc[1], 0);
+ gpiod_set_value_cansleep(lcd->im_pins->desc[2], 1);
}
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
@@ -580,6 +579,7 @@ MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
static int hx8357_probe(struct spi_device *spi)
{
+ struct device *dev = &spi->dev;
struct lcd_device *lcdev;
struct hx8357_data *lcd;
const struct of_device_id *match;
@@ -601,49 +601,19 @@ static int hx8357_probe(struct spi_device *spi)
if (!match || !match->data)
return -EINVAL;
- lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
- if (!gpio_is_valid(lcd->reset)) {
- dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
- return -EINVAL;
- }
+ lcd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(lcd->reset))
+ return dev_err_probe(dev, PTR_ERR(lcd->reset), "failed to request reset GPIO\n");
+ gpiod_set_consumer_name(lcd->reset, "hx8357-reset");
- ret = devm_gpio_request_one(&spi->dev, lcd->reset,
- GPIOF_OUT_INIT_HIGH,
- "hx8357-reset");
- if (ret) {
- dev_err(&spi->dev,
- "failed to request gpio %d: %d\n",
- lcd->reset, ret);
- return -EINVAL;
- }
+ lcd->im_pins = devm_gpiod_get_array_optional(dev, "im", GPIOD_OUT_LOW);
+ if (IS_ERR(lcd->im_pins))
+ return dev_err_probe(dev, PTR_ERR(lcd->im_pins), "failed to request im GPIOs\n");
+ if (lcd->im_pins->ndescs < HX8357_NUM_IM_PINS)
+ return dev_err_probe(dev, -EINVAL, "not enough im GPIOs\n");
- if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
- lcd->use_im_pins = 1;
-
- for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
- lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
- "im-gpios", i);
- if (lcd->im_pins[i] == -EPROBE_DEFER) {
- dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
- return -EPROBE_DEFER;
- }
- if (!gpio_is_valid(lcd->im_pins[i])) {
- dev_err(&spi->dev, "Missing dt property: im-gpios\n");
- return -EINVAL;
- }
-
- ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
- GPIOF_OUT_INIT_LOW,
- "im_pins");
- if (ret) {
- dev_err(&spi->dev, "failed to request gpio %d: %d\n",
- lcd->im_pins[i], ret);
- return -EINVAL;
- }
- }
- } else {
- lcd->use_im_pins = 0;
- }
+ for (i = 0; i < HX8357_NUM_IM_PINS; i++)
+ gpiod_set_consumer_name(lcd->im_pins->desc[i], "im_pins");
lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd,
&hx8357_ops);
--
2.39.2
Powered by blists - more mailing lists