[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230322035926.1791317-1-yukuai1@huaweicloud.com>
Date: Wed, 22 Mar 2023 11:59:26 +0800
From: Yu Kuai <yukuai1@...weicloud.com>
To: ming.lei@...hat.com, jack@...e.cz, hch@...radead.org,
axboe@...nel.dk, yukuai3@...wei.com
Cc: linux-block@...r.kernel.org, linux-kernel@...r.kernel.org,
yukuai1@...weicloud.com, yi.zhang@...wei.com, yangerkun@...wei.com
Subject: [PATCH] block: don't set GD_NEED_PART_SCAN if scan partition failed
From: Yu Kuai <yukuai3@...wei.com>
Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.
Test procedure:
mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0
sgdisk -n 0:0:+100MiB /dev/md0
blockdev --rereadpt /dev/sda
blockdev --rereadpt /dev/sdb
mdadm -S /dev/md0
mdadm -A /dev/md0 /dev/sda /dev/sdb
Test result: underlying disk partition and raid partition can be
observed at the same time
Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.
Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
---
block/genhd.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/block/genhd.c b/block/genhd.c
index 08bb1a9ec22c..a72e27d6779d 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -368,7 +368,6 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode)
if (disk->open_partitions)
return -EBUSY;
- set_bit(GD_NEED_PART_SCAN, &disk->state);
/*
* If the device is opened exclusively by current thread already, it's
* safe to scan partitons, otherwise, use bd_prepare_to_claim() to
@@ -381,12 +380,19 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode)
return ret;
}
+ set_bit(GD_NEED_PART_SCAN, &disk->state);
bdev = blkdev_get_by_dev(disk_devt(disk), mode & ~FMODE_EXCL, NULL);
if (IS_ERR(bdev))
ret = PTR_ERR(bdev);
else
blkdev_put(bdev, mode & ~FMODE_EXCL);
+ /*
+ * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set,
+ * and this will cause that re-assemble partitioned raid device will
+ * creat partition for underlying disk.
+ */
+ clear_bit(GD_NEED_PART_SCAN, &disk->state);
if (!(mode & FMODE_EXCL))
bd_abort_claiming(disk->part0, disk_scan_partitions);
return ret;
--
2.31.1
Powered by blists - more mailing lists