| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <79ceb9c5-2657-ca9b-e017-5ec14acfcda1@loongson.cn>
Date: Wed, 22 Mar 2023 10:07:26 +0800
From: zhuyinbo <zhuyinbo@...ngson.cn>
To: Stephen Boyd <sboyd@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Jianmin Lv <lvjianmin@...ngson.cn>, wanghongliang@...ngson.cn,
Liu Peibao <liupeibao@...ngson.cn>,
loongson-kernel@...ts.loongnix.cn, zhuyinbo@...ngson.cn
Subject: Re: [PATCH v15 2/2] clk: clk-loongson2: add clock controller driver
support
在 2023/3/22 上午7:42, Stephen Boyd 写道:
> Quoting Yinbo Zhu (2023-03-21 06:07:10)
>> diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
>> new file mode 100644
>> index 000000000000..090810655511
>> --- /dev/null
>> +++ b/drivers/clk/clk-loongson2.c
>> @@ -0,0 +1,344 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Author: Yinbo Zhu <zhuyinbo@...ngson.cn>
>> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/io-64-nonatomic-lo-hi.h>
>> +#include <dt-bindings/clock/loongson,ls2k-clk.h>
>> +
>> +#define LOONGSON2_PLL_MULT_SHIFT 32
>> +#define LOONGSON2_PLL_MULT_WIDTH 10
>> +#define LOONGSON2_PLL_DIV_SHIFT 26
>> +#define LOONGSON2_PLL_DIV_WIDTH 6
>> +#define LOONGSON2_APB_FREQSCALE_SHIFT 20
>> +#define LOONGSON2_APB_FREQSCALE_WIDTH 3
>> +#define LOONGSON2_USB_FREQSCALE_SHIFT 16
>> +#define LOONGSON2_USB_FREQSCALE_WIDTH 3
>> +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
>> +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
>> +#define LOONGSON2_BOOT_FREQSCALE_SHIFT 8
>> +#define LOONGSON2_BOOT_FREQSCALE_WIDTH 3
>> +
>> +static void __iomem *loongson2_pll_base;
> Why is this a global?
Normally, this should be an element in the structure, but since there is
only one
element, It is directly defined as a global variable for use by other
function.
>
>> +
>> +static const struct clk_parent_data pdata[] = {
>> + { .fw_name = "ref_100m",},
>> +};
>> +
>> +static struct clk_hw *loongson2_clk_register(struct device *dev,
>> + const char *name,
>> + const char *parent_name,
>> + const struct clk_ops *ops,
>> + unsigned long flags)
>> +{
>> + int ret;
>> + struct clk_hw *hw;
>> + struct clk_init_data init;
>> +
>> + /* allocate the divider */
> Remove useless comment.
okay , I will remove it.
>
>> + hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
>> + if (!hw)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.ops = ops;
>> + init.flags = flags;
>> + init.num_parents = 1;
>> +
>> + if (!parent_name)
>> + init.parent_data = pdata;
>> + else
>> + init.parent_names = &parent_name;
>> +
>> + hw->init = &init;
>> +
>> + /* register the clock */
> Remove useless comment.
okay, I will remove it.
>
>> + ret = devm_clk_hw_register(dev, hw);
>> + if (ret)
>> + hw = ERR_PTR(ret);
>> +
>> + return hw;
>> +}
>> +
> [....]
>> +
>> +static const struct clk_ops loongson2_sata_clk_ops = {
>> + .recalc_rate = loongson2_sata_recalc_rate,
>> +};
>> +
>> +static inline void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
> This needs to return an error instead of be void.
okay, I got it.
>
>> +{
>> + unsigned int i;
>> +
>> + for (i = 0; i < count; i++)
>> + if (IS_ERR(clks[i]))
>> + pr_err("Loongson2 clk %u: register failed with %ld\n",
>> + i, PTR_ERR(clks[i]));
>> +}
>> +
>> +static inline void loongson2_clocks_init(struct device *dev)
>> +{
>> + struct clk_hw **hws;
>> + struct clk_hw_onecell_data *clk_hw_data;
>> + spinlock_t loongson2_clk_lock;
>> +
>> + clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
>> + GFP_KERNEL);
>> + if (WARN_ON(!clk_hw_data))
>> + return;
>> +
>> + clk_hw_data->num = LOONGSON2_CLK_END;
>> + hws = clk_hw_data->hws;
>> +
>> + hws[LOONGSON2_NODE_PLL] = loongson2_clk_register(dev, "node_pll",
>> + NULL,
>> + &loongson2_node_clk_ops, 0);
>> +
>> + hws[LOONGSON2_DDR_PLL] = loongson2_clk_register(dev, "ddr_pll",
>> + NULL,
>> + &loongson2_ddr_clk_ops, 0);
>> +
>> + hws[LOONGSON2_DC_PLL] = loongson2_clk_register(dev, "dc_pll",
>> + NULL,
>> + &loongson2_dc_clk_ops, 0);
>> +
>> + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_register(dev, "pix0_pll",
>> + NULL,
>> + &loongson2_pix0_clk_ops, 0);
>> +
>> + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_register(dev, "pix1_pll",
>> + NULL,
>> + &loongson2_pix1_clk_ops, 0);
>> +
>> + hws[LOONGSON2_BOOT_CLK] = loongson2_clk_register(dev, "boot",
>> + NULL,
>> + &loongson2_boot_clk_ops, 0);
>> +
>> + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node",
> These should be devm_ variants so they're undone on failure.
okay , I will use devm_clk_hw_register_divider
>
>> + "node_pll", 0,
>> + loongson2_pll_base + 0x8, 0,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + /*
>> + * The hda clk divisor in the upper 32bits and the clk-prodiver
>> + * layer code doesn't support 64bit io operation thus a conversion
>> + * is required that subtract shift by 32 and add 4byte to the hda
>> + * address
>> + */
>> + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda",
>> + "ddr_pll", 0,
>> + loongson2_pll_base + 0x22, 12,
>> + 7, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu",
>> + "ddr_pll", 0,
>> + loongson2_pll_base + 0x18, 22,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr",
>> + "ddr_pll", 0,
>> + loongson2_pll_base + 0x18, 0,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac",
>> + "dc_pll", 0,
>> + loongson2_pll_base + 0x28, 22,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc",
>> + "dc_pll", 0,
>> + loongson2_pll_base + 0x28, 0,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(dev, "apb",
>> + "gmac",
>> + &loongson2_apb_clk_ops, 0);
>> +
>> + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(dev, "usb",
>> + "gmac",
>> + &loongson2_usb_clk_ops, 0);
>> +
>> + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(dev, "sata",
>> + "gmac",
>> + &loongson2_sata_clk_ops, 0);
>> +
>> + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
>> + "pix0_pll", 0,
>> + loongson2_pll_base + 0x38, 0, 6,
>> + CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
>> + "pix1_pll", 0,
>> + loongson2_pll_base + 0x48, 0, 6,
>> + CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
>> +
>> + devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_hw_data);
> Return this error code.
okay, I got it.
>
>> +}
>> +
>> +static const struct of_device_id loongson2_clk_match_table[] = {
>> + { .compatible = "loongson,ls2k-clk" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, loongson2_clk_match_table);
> This table can go next to the driver instead of be above probe.
okay, I will move it above loongson2_clk_driver.
>
>> +
>> +static int loongson2_clk_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> +
>> + loongson2_pll_base = devm_platform_ioremap_resource(pdev, 0);
>> + if (!loongson2_pll_base)
> Should be IS_ERR(loongson2_pll_base)
okay, I got it.
>
>> + return PTR_ERR(loongson2_pll_base);
>> +
>> + loongson2_clocks_init(dev);
> Please inline this function here.
The loongson2_clocks_init had inline in this version, or do you mean something else ? Need to inline the probe?
Powered by blists - more mailing lists