linux-kernel - Re: [PATCH 1/2] ARM: dts: qcom: sdx65: add IPA information

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 26 Mar 2023 11:01:37 -0500
From:   Alex Elder <elder@...e.org>
To:     Krzysztof Kozlowski <krzk@...nel.org>,
        Alex Elder <elder@...aro.org>, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, andersson@...nel.org,
        agross@...nel.org, konrad.dybcio@...aro.org
Cc:     quic_rohiagar@...cinc.com, caleb.connolly@...aro.org,
        mka@...omium.org, evgreen@...omium.org, quic_cpratapa@...cinc.com,
        quic_avuyyuru@...cinc.com, quic_jponduru@...cinc.com,
        quic_subashab@...cinc.com, elder@...nel.org,
        devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: qcom: sdx65: add IPA information

On 3/25/23 6:14 AM, Krzysztof Kozlowski wrote:
> On 24/03/2023 21:15, Alex Elder wrote:
>> Add IPA-related nodes and definitions to "sdx65.dtsi".  The SMP2P
>> nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.
>>
>> Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust
>> Zone on this platform.
>>
>> Tested-by: Rohit Agarwal <quic_rohiagar@...cinc.com>
>> Signed-off-by: Alex Elder <elder@...aro.org>
>> ---
>>   arch/arm/boot/dts/qcom-sdx65-mtp.dts |  5 ++++
>>   arch/arm/boot/dts/qcom-sdx65.dtsi    | 38 ++++++++++++++++++++++++++++
>>   2 files changed, 43 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> index ed98c83c141fc..72e25de0db5fc 100644
>> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> @@ -245,6 +245,11 @@ &blsp1_uart3 {
>>   	status = "okay";
>>   };
>>   
>> +&ipa {
>> +	qcom,gsi-loader = "skip";
>> +	status = "okay";
>> +};
>> +
>>   &qpic_bam {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>> index 192f9f94bc8b4..360d6dc144811 100644
>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>> @@ -11,6 +11,7 @@
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/power/qcom-rpmpd.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/interconnect/qcom,sdx65.h>
>>   
>>   / {
>>   	#address-cells = <1>;
>> @@ -299,6 +300,43 @@ tcsr_mutex: hwlock@...0000 {
>>   			#hwlock-cells = <1>;
>>   		};
>>   
>> +		ipa: ipa@...4000 {
>> +			compatible = "qcom,sdx65-ipa";
>> +
>> +			iommus = <&apps_smmu 0x5e0 0x0>,
>> +				 <&apps_smmu 0x5e2 0x0>;
>> +			reg = <0x3f40000 0x10000>,
>> +			      <0x3f50000 0x5000>,
>> +			      <0x3e04000 0xfc000>;
>> +			reg-names = "ipa-reg",
>> +				    "ipa-shared",
>> +				    "gsi";
>> +
>> +			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
>> +					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
>> +					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> +					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-names = "ipa",
>> +					   "gsi",
>> +					   "ipa-clock-query",
>> +					   "ipa-setup-ready";
> 
> These look misaligned.

I believe this is the alignment convention used by all IPA nodes
in DTS files.  It's possible I'm not seeing something you are,
but...  what alignment should be used?  And if I change this,
should I change all others?

Thanks.

					-Alex

> 
> With above:
> 
> Reviewed-by: Krzysztof Kozlowski <krzk@...nel.org>
> 
> 
> Best regards,
> Krzysztof
>