[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <80e9a424-1d5b-5402-4567-c489204869b6@linaro.org>
Date: Sun, 26 Mar 2023 18:04:19 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Alex Elder <elder@...e.org>, Krzysztof Kozlowski <krzk@...nel.org>,
Alex Elder <elder@...aro.org>, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, andersson@...nel.org,
agross@...nel.org, konrad.dybcio@...aro.org
Cc: quic_rohiagar@...cinc.com, caleb.connolly@...aro.org,
mka@...omium.org, evgreen@...omium.org, quic_cpratapa@...cinc.com,
quic_avuyyuru@...cinc.com, quic_jponduru@...cinc.com,
quic_subashab@...cinc.com, elder@...nel.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: qcom: sdx65: add IPA information
On 26/03/2023 18:01, Alex Elder wrote:
> On 3/25/23 6:14 AM, Krzysztof Kozlowski wrote:
>> On 24/03/2023 21:15, Alex Elder wrote:
>>> Add IPA-related nodes and definitions to "sdx65.dtsi". The SMP2P
>>> nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.
>>>
>>> Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust
>>> Zone on this platform.
>>>
>>> Tested-by: Rohit Agarwal <quic_rohiagar@...cinc.com>
>>> Signed-off-by: Alex Elder <elder@...aro.org>
>>> ---
>>> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 5 ++++
>>> arch/arm/boot/dts/qcom-sdx65.dtsi | 38 ++++++++++++++++++++++++++++
>>> 2 files changed, 43 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>>> index ed98c83c141fc..72e25de0db5fc 100644
>>> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>>> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>>> @@ -245,6 +245,11 @@ &blsp1_uart3 {
>>> status = "okay";
>>> };
>>>
>>> +&ipa {
>>> + qcom,gsi-loader = "skip";
>>> + status = "okay";
>>> +};
>>> +
>>> &qpic_bam {
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> index 192f9f94bc8b4..360d6dc144811 100644
>>> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
>>> @@ -11,6 +11,7 @@
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/power/qcom-rpmpd.h>
>>> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +#include <dt-bindings/interconnect/qcom,sdx65.h>
>>>
>>> / {
>>> #address-cells = <1>;
>>> @@ -299,6 +300,43 @@ tcsr_mutex: hwlock@...0000 {
>>> #hwlock-cells = <1>;
>>> };
>>>
>>> + ipa: ipa@...4000 {
>>> + compatible = "qcom,sdx65-ipa";
>>> +
>>> + iommus = <&apps_smmu 0x5e0 0x0>,
>>> + <&apps_smmu 0x5e2 0x0>;
>>> + reg = <0x3f40000 0x10000>,
>>> + <0x3f50000 0x5000>,
>>> + <0x3e04000 0xfc000>;
>>> + reg-names = "ipa-reg",
>>> + "ipa-shared",
>>> + "gsi";
>>> +
>>> + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
>>> + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
>>> + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>>> + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
>>> + interrupt-names = "ipa",
>>> + "gsi",
>>> + "ipa-clock-query",
>>> + "ipa-setup-ready";
>>
>> These look misaligned.
>
> I believe this is the alignment convention used by all IPA nodes
> in DTS files. It's possible I'm not seeing something you are,
> but... what alignment should be used? And if I change this,
> should I change all others?
If this is aligned, then fine. The diff points it is not, but the diff
might be a bit tricky sometimes.
Alignment is till " in previous line. For example sdm845 looks fine.
Best regards,
Krzysztof
Powered by blists - more mailing lists