[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <35879793-b677-a901-3f4c-6dc7d3c017ee@linaro.org>
Date: Sun, 26 Mar 2023 10:56:04 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Dylan Van Assche <me@...anvanassche.be>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org
Subject: Re: [PATCH 1/4] dts: arm64: qcom: sdm845: add SLPI remoteproc
On 25/03/2023 14:51, Dylan Van Assche wrote:
> Add the SLPI remoteproc to the SDM845 Qualcomm SoC which is responsible
> for exposing the sensors connected to the SoC. The SLPI communicates
> over GLink edge 'dsps' and is similar to other DSPs e.g. ADSP or CDSP.
> This patch allows the SLPI to boot and expose itself over QRTR as
> service 400.
>
> Signed-off-by: Dylan Van Assche <me@...anvanassche.be>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 37 ++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 2f32179c7d1b..8dcfe6293762 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3311,6 +3311,43 @@ glink-edge {
> };
> };
>
> + slpi_pas: remoteproc@...0000 {
> + compatible = "qcom,sdm845-slpi-pas";
> + reg = <0 0x5c00000 0 0x4000>;
> +
> + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
> + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + power-domains = <&rpmhpd SDM845_CX>,
> + <&rpmhpd SDM845_MX>;
> + power-domain-names = "lcx", "lmx";
> +
> + memory-region = <&slpi_mem>;
> +
> + qcom,smem-states = <&slpi_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
> + label = "dsps";
> + qcom,remote-pid = <3>;
> + mboxes = <&apss_shared 24>;
> + };
> + };
> +
> +
Do not add double blank lines. Same in other patchsets.
Best regards,
Krzysztof
Powered by blists - more mailing lists