linux-kernel - Re: [PATCH 2/4] dts: arm64: qcom: sdm845: add SLPI FastRPC support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <61881229-cd91-cfb3-be2b-51d516f8473c@linaro.org>
Date:   Sun, 26 Mar 2023 10:56:31 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Dylan Van Assche <me@...anvanassche.be>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     Konrad Dybcio <konrad.dybcio@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org
Subject: Re: [PATCH 2/4] dts: arm64: qcom: sdm845: add SLPI FastRPC support

On 25/03/2023 14:51, Dylan Van Assche wrote:
> Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through
> an allocated memory region to load files from the host filesystem
> such as sensor configuration files.
> 
> Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to
> downstream, to allow userspace to communicate with the SLPI via the
> FastRPC interface for initializing the sensors on the SLPI.
> 
> Signed-off-by: Dylan Van Assche <me@...anvanassche.be>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 8dcfe6293762..5a6c7d00719b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -878,6 +878,14 @@ mdata_mem: mpss-metadata {
>  			size = <0 0x4000>;
>  			no-map;
>  		};
> +
> +		fastrpc_mem: fastrpc {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			alloc-ranges = <0 0x00000000 0 0xffffffff>;
> +			alignment = <0 0x400000>;
> +			size = <0 0x1000000>;
> +		};
>  	};
>  
>  	adsp_pas: remoteproc-adsp {
> @@ -3344,6 +3352,22 @@ glink-edge {
>  				label = "dsps";
>  				qcom,remote-pid = <3>;
>  				mboxes = <&apss_shared 24>;
> +
> +				fastrpc {
> +					compatible = "qcom,fastrpc";
> +					qcom,glink-channels = "fastrpcglink-apps-dsp";
> +					label = "sdsp";
> +					qcom,non-secure-domain;
> +					qcom,vmids = <0x3 0xF 0x5 0x6>;
> +					memory-region = <&fastrpc_mem>;
> +					qcom,assign-all-mem;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					compute-cb {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

Best regards,
Krzysztof