lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJpqR-QisyWEHE83oFbXt8wUcn2Ofd4W6UwFmkYzGD18N9Q@mail.gmail.com>
Date:   Sun, 26 Mar 2023 12:21:04 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sdm630: move DSI opp-table out of
 soc node

On Sun, 26 Mar 2023 at 12:16, Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
>
> The soc node is supposed to have only device nodes with MMIO addresses,
> so move the DSI OPP out of it (it is used also by second DSI1 on
> SDM660):

This raises a question: would it make sense to add /opps to handle all
opp tables?

>
>   sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'}
>     From schema: dtschema/schemas/simple-bus.yaml
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>
> ---
>
> Changes since v1:
> 1. Move the node out of soc. Don't add Konrad's review tag.
> ---
>  arch/arm64/boot/dts/qcom/sdm630.dtsi | 38 ++++++++++++++--------------
>  1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 72d9a12b5e9c..b91e423a3cfc 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -328,6 +328,25 @@ memory@...00000 {
>                 reg = <0x0 0x80000000 0x0 0x0>;
>         };
>
> +       dsi_opp_table: opp-table-dsi {
> +               compatible = "operating-points-v2";
> +
> +               opp-131250000 {
> +                       opp-hz = /bits/ 64 <131250000>;
> +                       required-opps = <&rpmpd_opp_svs>;
> +               };
> +
> +               opp-210000000 {
> +                       opp-hz = /bits/ 64 <210000000>;
> +                       required-opps = <&rpmpd_opp_svs_plus>;
> +               };
> +
> +               opp-262500000 {
> +                       opp-hz = /bits/ 64 <262500000>;
> +                       required-opps = <&rpmpd_opp_nom>;
> +               };
> +       };
> +
>         pmu {
>                 compatible = "arm,armv8-pmuv3";
>                 interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1450,25 +1469,6 @@ mmcc: clock-controller@...0000 {
>                                         <0>;
>                 };
>
> -               dsi_opp_table: opp-table-dsi {
> -                       compatible = "operating-points-v2";
> -
> -                       opp-131250000 {
> -                               opp-hz = /bits/ 64 <131250000>;
> -                               required-opps = <&rpmpd_opp_svs>;
> -                       };
> -
> -                       opp-210000000 {
> -                               opp-hz = /bits/ 64 <210000000>;
> -                               required-opps = <&rpmpd_opp_svs_plus>;
> -                       };
> -
> -                       opp-262500000 {
> -                               opp-hz = /bits/ 64 <262500000>;
> -                               required-opps = <&rpmpd_opp_nom>;
> -                       };
> -               };
> -
>                 mdss: display-subsystem@...0000 {
>                         compatible = "qcom,mdss";
>                         reg = <0x0c900000 0x1000>,
> --
> 2.34.1
>


-- 
With best wishes
Dmitry

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ