linux-kernel - [PATCH v3 2/2] ARM: dts: qcom-sdx65: move status properties to end of nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230327195605.2854123-3-elder@linaro.org>
Date:   Mon, 27 Mar 2023 14:56:05 -0500
From:   Alex Elder <elder@...aro.org>
To:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        andersson@...nel.org, agross@...nel.org, konrad.dybcio@...aro.org
Cc:     quic_rohiagar@...cinc.com, caleb.connolly@...aro.org,
        mka@...omium.org, evgreen@...omium.org, quic_cpratapa@...cinc.com,
        quic_avuyyuru@...cinc.com, quic_jponduru@...cinc.com,
        quic_subashab@...cinc.com, elder@...nel.org,
        devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3 2/2] ARM: dts: qcom-sdx65: move status properties to end of nodes

Move a few device tree "status" properties so that they are the last
specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi".
Note that properties must always be specified before sub-nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Signed-off-by: Alex Elder <elder@...aro.org>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 6 +++---
 arch/arm/boot/dts/qcom-sdx65.dtsi    | 8 +++++---
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 72e25de0db5fc..57bc3b03d3aac 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -270,8 +270,8 @@ nand@0 {
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
 };
 
 &usb {
@@ -283,14 +283,14 @@ &usb_dwc3 {
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4b_0p88>;
 	vdda33-supply = <&vreg_l10b_3p08>;
 	vdda18-supply = <&vreg_l5b_1p8>;
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4b_0p88>;
 	vdda-pll-supply = <&vreg_l1b_1p2>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 74671cc12c884..525dd8a1f6649 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -224,16 +224,15 @@ usb_hsphy: phy@...000 {
 				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0xff4000 0x120>;
 			#phy-cells = <0>;
-			status = "disabled";
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "ref";
 			resets = <&gcc GCC_QUSB2PHY_BCR>;
+			status = "disabled";
 		};
 
 		usb_qmpphy: phy@...000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
 			reg = <0x00ff6000 0x1c8>;
-			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -247,6 +246,8 @@ usb_qmpphy: phy@...000 {
 				 <&gcc GCC_USB3_PHY_BCR>;
 			reset-names = "phy", "common";
 
+			status = "disabled";
+
 			usb_ssphy: phy@...200 {
 				reg = <0x00ff6e00 0x160>,
 				      <0x00ff7000 0x1ec>,
@@ -394,7 +395,6 @@ mem_noc: interconnect@...0000 {
 		usb: usb@...8800 {
 			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
 			reg = <0x0a6f8800 0x400>;
-			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -424,6 +424,8 @@ usb: usb@...8800 {
 
 			resets = <&gcc GCC_USB30_BCR>;
 
+			status = "disabled";
+
 			usb_dwc3: usb@...0000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a600000 0xcd00>;
-- 
2.34.1