Message-ID: <2687a998-6dbe-de8f-2f62-1456d2de7940@huawei.com>
Date:   Thu, 30 Mar 2023 21:45:46 +0800
From:   Yicong Yang <yangyicong@...wei.com>
To:     Punit Agrawal <punit.agrawal@...edance.com>
CC:     <yangyicong@...ilicon.com>, <akpm@...ux-foundation.org>,
        <linux-mm@...ck.org>, <linux-arm-kernel@...ts.infradead.org>,
        <x86@...nel.org>, <catalin.marinas@....com>, <will@...nel.org>,
        <anshuman.khandual@....com>, <linux-doc@...r.kernel.org>,
        <corbet@....net>, <peterz@...radead.org>, <arnd@...db.de>,
        <linux-kernel@...r.kernel.org>, <darren@...amperecomputing.com>,
        <huzhanyuan@...o.com>, <lipeifeng@...o.com>,
        <zhangshiming@...o.com>, <guojian@...o.com>, <realmz6@...il.com>,
        <linux-mips@...r.kernel.org>, <openrisc@...ts.librecores.org>,
        <linuxppc-dev@...ts.ozlabs.org>, <linux-riscv@...ts.infradead.org>,
        <linux-s390@...r.kernel.org>, Barry Song <21cnbao@...il.com>,
        <wangkefeng.wang@...wei.com>, <xhao@...ux.alibaba.com>,
        <prime.zeng@...ilicon.com>, <Jonathan.Cameron@...wei.com>,
        Barry Song <v-songbaohua@...o.com>,
        Nadav Amit <namit@...are.com>, Mel Gorman <mgorman@...e.de>
Subject: Re: [PATCH v8 2/2] arm64: support batched/deferred tlb shootdown
 during page reclamation

Hi Punit,

On 2023/3/30 21:15, Punit Agrawal wrote:
> Hi Yicong,
> 
> Yicong Yang <yangyicong@...wei.com> writes:
> 
>> From: Barry Song <v-songbaohua@...o.com>
>>
>> on x86, batched and deferred tlb shootdown has lead to 90%
>> performance increase on tlb shootdown. on arm64, HW can do
>> tlb shootdown without software IPI. But sync tlbi is still
>> quite expensive.
>>
>> Even running a simplest program which requires swapout can
>> prove this is true,
>>  #include <sys/types.h>
>>  #include <unistd.h>
>>  #include <sys/mman.h>
>>  #include <string.h>
>>
>>  int main()
>>  {
>>  #define SIZE (1 * 1024 * 1024)
>>          volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
>>                                           MAP_SHARED | MAP_ANONYMOUS, -1, 0);
>>
>>          memset(p, 0x88, SIZE);
>>
>>          for (int k = 0; k < 10000; k++) {
>>                  /* swap in */
>>                  for (int i = 0; i < SIZE; i += 4096) {
>>                          (void)p[i];
>>                  }
>>
>>                  /* swap out */
>>                  madvise(p, SIZE, MADV_PAGEOUT);
>>          }
>>  }
>>
>> Perf result on snapdragon 888 with 8 cores by using zRAM
>> as the swap block device.
>>
>>  ~ # perf record taskset -c 4 ./a.out
>>  [ perf record: Woken up 10 times to write data ]
>>  [ perf record: Captured and wrote 2.297 MB perf.data (60084 samples) ]
>>  ~ # perf report
>>  # To display the perf.data header info, please use --header/--header-only options.
>>  # To display the perf.data header info, please use --header/--header-only options.
>>  #
>>  #
>>  # Total Lost Samples: 0
>>  #
>>  # Samples: 60K of event 'cycles'
>>  # Event count (approx.): 35706225414
>>  #
>>  # Overhead  Command  Shared Object      Symbol
>>  # ........  .......  .................  .............................................................................
>>  #
>>     21.07%  a.out    [kernel.kallsyms]  [k] _raw_spin_unlock_irq
>>      8.23%  a.out    [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
>>      6.67%  a.out    [kernel.kallsyms]  [k] filemap_map_pages
>>      6.16%  a.out    [kernel.kallsyms]  [k] __zram_bvec_write
>>      5.36%  a.out    [kernel.kallsyms]  [k] ptep_clear_flush
>>      3.71%  a.out    [kernel.kallsyms]  [k] _raw_spin_lock
>>      3.49%  a.out    [kernel.kallsyms]  [k] memset64
>>      1.63%  a.out    [kernel.kallsyms]  [k] clear_page
>>      1.42%  a.out    [kernel.kallsyms]  [k] _raw_spin_unlock
>>      1.26%  a.out    [kernel.kallsyms]  [k] mod_zone_state.llvm.8525150236079521930
>>      1.23%  a.out    [kernel.kallsyms]  [k] xas_load
>>      1.15%  a.out    [kernel.kallsyms]  [k] zram_slot_lock
>>
>> ptep_clear_flush() takes 5.36% CPU in the micro-benchmark
>> swapping in/out a page mapped by only one process. If the
>> page is mapped by multiple processes, typically, like more
>> than 100 on a phone, the overhead would be much higher as
>> we have to run tlb flush 100 times for one single page.
>> Plus, tlb flush overhead will increase with the number
>> of CPU cores due to the bad scalability of tlb shootdown
>> in HW, so those ARM64 servers should expect much higher
>> overhead.
>>
>> Further perf annonate shows 95% cpu time of ptep_clear_flush
>> is actually used by the final dsb() to wait for the completion
>> of tlb flush. This provides us a very good chance to leverage
>> the existing batched tlb in kernel. The minimum modification
>> is that we only send async tlbi in the first stage and we send
>> dsb while we have to sync in the second stage.
>>
>> With the above simplest micro benchmark, collapsed time to
>> finish the program decreases around 5%.
>>
>> Typical collapsed time w/o patch:
>>  ~ # time taskset -c 4 ./a.out
>>  0.21user 14.34system 0:14.69elapsed
>> w/ patch:
>>  ~ # time taskset -c 4 ./a.out
>>  0.22user 13.45system 0:13.80elapsed
>>
>> Also, Yicong Yang added the following observation.
>> 	Tested with benchmark in the commit on Kunpeng920 arm64 server,
>> 	observed an improvement around 12.5% with command
>> 	`time ./swap_bench`.
>> 		w/o		w/
>> 	real	0m13.460s	0m11.771s
>> 	user	0m0.248s	0m0.279s
>> 	sys	0m12.039s	0m11.458s
>>
>> 	Originally it's noticed a 16.99% overhead of ptep_clear_flush()
>> 	which has been eliminated by this patch:
>>
>> 	[root@...alhost yang]# perf record -- ./swap_bench && perf report
>> 	[...]
>> 	16.99%  swap_bench  [kernel.kallsyms]  [k] ptep_clear_flush
>>
>> It is tested on 4,8,128 CPU platforms and shows to be beneficial on
>> large systems but may not have improvement on small systems like on
>> a 4 CPU platform. So make ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH depends
>> on CONFIG_EXPERT for this stage and make this disabled on systems
>> with less than 8 CPUs. User can modify this threshold according to
>> their own platforms by CONFIG_NR_CPUS_FOR_BATCHED_TLB.
> 
> The commit log and the patch disagree on the name of the config option
> (CONFIG_NR_CPUS_FOR_BATCHED_TLB vs CONFIG_ARM64_NR_CPUS_FOR_BATCHED_TLB).
> 

ah yes, it's a typo and I'll fix it.

> But more importantly, I was wondering why this posting doesn't address
> Catalin's feedback [a] about using a runtime tunable. Maybe I missed the
> follow-up discussion.
> 

I must have missed that, terribly sorry for it... Thanks for pointing it out!
Let me try to implement a version using a runtime tunable and get back with
some test results.

Thanks,
Yicong

> Thanks,
> Punit
> 
> [a] https://lore.kernel.org/linux-mm/Y7xMhPTAwcUT4O6b@arm.com/
> 
>> Also this patch improve the performance of page migration. Using pmbench
>> and tries to migrate the pages of pmbench between node 0 and node 1 for
>> 20 times, this patch decrease the time used more than 50% and saved the
>> time used by ptep_clear_flush().
>>
>> This patch extends arch_tlbbatch_add_mm() to take an address of the
>> target page to support the feature on arm64. Also rename it to
>> arch_tlbbatch_add_pending() to better match its function since we
>> don't need to handle the mm on arm64 and add_mm is not proper.
>> add_pending will make sense to both as on x86 we're pending the
>> TLB flush operations while on arm64 we're pending the synchronize
>> operations.
>>
>> Cc: Anshuman Khandual <anshuman.khandual@....com>
>> Cc: Jonathan Corbet <corbet@....net>
>> Cc: Nadav Amit <namit@...are.com>
>> Cc: Mel Gorman <mgorman@...e.de>
>> Tested-by: Yicong Yang <yangyicong@...ilicon.com>
>> Tested-by: Xin Hao <xhao@...ux.alibaba.com>
>> Tested-by: Punit Agrawal <punit.agrawal@...edance.com>
>> Signed-off-by: Barry Song <v-songbaohua@...o.com>
>> Signed-off-by: Yicong Yang <yangyicong@...ilicon.com>
>> Reviewed-by: Kefeng Wang <wangkefeng.wang@...wei.com>
>> Reviewed-by: Xin Hao <xhao@...ux.alibaba.com>
>> Reviewed-by: Anshuman Khandual <anshuman.khandual@....com>
>> ---
>>  .../features/vm/TLB/arch-support.txt          |  2 +-
>>  arch/arm64/Kconfig                            |  6 +++
>>  arch/arm64/include/asm/tlbbatch.h             | 12 +++++
>>  arch/arm64/include/asm/tlbflush.h             | 52 ++++++++++++++++++-
>>  arch/x86/include/asm/tlbflush.h               |  5 +-
>>  include/linux/mm_types_task.h                 |  4 +-
>>  mm/rmap.c                                     | 12 +++--
>>  7 files changed, 81 insertions(+), 12 deletions(-)
>>  create mode 100644 arch/arm64/include/asm/tlbbatch.h
> 
> 
> [...]
> 
> .
> 

Powered by blists - more mailing lists