[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DU0PR04MB9417853B92B651A69452006088929@DU0PR04MB9417.eurprd04.prod.outlook.com>
Date: Mon, 3 Apr 2023 08:36:14 +0000
From: Peng Fan <peng.fan@....com>
To: Ahmad Fatoum <a.fatoum@...gutronix.de>,
"Peng Fan (OSS)" <peng.fan@....nxp.com>,
"abelvesa@...nel.org" <abelvesa@...nel.org>,
"mturquette@...libre.com" <mturquette@...libre.com>,
"sboyd@...nel.org" <sboyd@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>
CC: "S.J. Wang" <shengjiu.wang@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH V2] clk: imx: imx6sx: spdif clock rate is too high for
asrc
> Subject: Re: [PATCH V2] clk: imx: imx6sx: spdif clock rate is too high for asrc
>
> Hello Peng,
>
> On 03.04.23 10:21, Peng Fan (OSS) wrote:
> > From: Shengjiu Wang <shengjiu.wang@....com>
> >
> > spdif clock is one of the asrc clock source, which is used for ideal
> > ratio mode. when set to 98.304MHz, it cause the divider of asrc input
> > clock and output clock exceed the maximum value, and asrc driver
> > saturate the value to maximum value, which will cause the ASRC's
> > performance very bad.
> > So we need to set spdif clock to a proper rate. which make asrc
> > divider not exceed maximum value, at least one of divider not exceed
> > maximum value.
> > The target is spdif clock rate / output(or input) sample rate less
> > than 1024(which is maximum divider).
> >
> > Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API")
>
> Before referenced commit, it looked like this:
>
> clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
>
> I think commit d55135689019 ("ARM: imx: add clock driver for imx6sx") is
> what you're after.
Should I add both the commits as Fixes? Or only the one your listed?
Thanks,
Peng.
>
> Cheers,
> Ahmad
>
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@....com>
> > Signed-off-by: Peng Fan <peng.fan@....com>
> > ---
> >
> > V2:
> > Add Fixes tag
> >
> > drivers/clk/imx/clk-imx6sx.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx6sx.c
> > b/drivers/clk/imx/clk-imx6sx.c index 7cf86707bc39..3face052527d 100644
> > --- a/drivers/clk/imx/clk-imx6sx.c
> > +++ b/drivers/clk/imx/clk-imx6sx.c
> > @@ -520,7 +520,7 @@ static void __init imx6sx_clocks_init(struct
> device_node *ccm_node)
> > clk_set_rate(hws[IMX6SX_CLK_PLL4_AUDIO_DIV]->clk, 393216000);
> >
> > clk_set_parent(hws[IMX6SX_CLK_SPDIF_SEL]->clk,
> hws[IMX6SX_CLK_PLL4_AUDIO_DIV]->clk);
> > - clk_set_rate(hws[IMX6SX_CLK_SPDIF_PODF]->clk, 98304000);
> > + clk_set_rate(hws[IMX6SX_CLK_SPDIF_PODF]->clk, 24576000);
> >
> > clk_set_parent(hws[IMX6SX_CLK_AUDIO_SEL]->clk,
> hws[IMX6SX_CLK_PLL3_USB_OTG]->clk);
> > clk_set_rate(hws[IMX6SX_CLK_AUDIO_PODF]->clk, 24000000);
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> pengutronix.de%2F&data=05%7C01%7Cpeng.fan%40nxp.com%7Cc7131cb2
> 058346303de208db341e3824%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> 0%7C0%7C638161076614883851%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C30
> 00%7C%7C%7C&sdata=bmXiNAsD5SCoNrZF7pTgPFpjbColwBdBsO2qxR0KVO
> U%3D&reserved=0 |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists