| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 6 Apr 2023 00:31:10 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
linux-kernel@...r.kernel.org, bhupesh.linux@...il.com,
robh+dt@...nel.org, krzysztof.kozlowski@...aro.org
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
Hi Dmitry,
On Sat, 1 Apr 2023 at 22:43, Dmitry Baryshkov
<dmitry.baryshkov@...aro.org> wrote:
>
> On Sat, 1 Apr 2023 at 18:49, Bhupesh Sharma <bhupesh.sharma@...aro.org> wrote:
> >
> > Add USB superspeed qmp phy node to dtsi.
> >
> > Make sure that the various board dts files (which include sm4250.dtsi file)
> > continue to work as intended.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
> > ---
> > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
> > arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++--
> > .../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++
> > 3 files changed, 40 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > index a1f0622db5a0..75951fd439df 100644
> > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > @@ -242,6 +242,9 @@ &usb {
> > &usb_dwc3 {
> > maximum-speed = "high-speed";
> > dr_mode = "peripheral";
> > +
> > + phys = <&usb_hsphy>;
> > + phy-names = "usb2-phy";
> > };
> >
> > &usb_hsphy {
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index 2a51c938bbcb..b2fa565e4816 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -650,6 +650,38 @@ usb_hsphy: phy@...3000 {
> > status = "disabled";
> > };
> >
> > + usb_qmpphy: phy@...5000 {
> > + compatible = "qcom,sm6115-qmp-usb3-phy";
> > + reg = <0x0 0x01615000 0x0 0x200>;
> > + clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> > + <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> > + clock-names = "cfg_ahb",
> > + "ref",
> > + "com_aux";
> > + resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>,
> > + <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
> > + reset-names = "phy_phy", "phy";
> > + status = "disabled";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + usb_ssphy: phy@...5200 {
>
> Please update this to newer style bindings (see
> qcom,sc8280xp-qmp-usb3-uni-phy.yaml).
I double checked the downstream driver and the HW documentation and
can confirm that this is not a UNI PHY i.e. it has 2 lanes (see
<https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/phy/qualcomm/phy-qcom-qmp-usb.c#n1923>).
Also this is a v3 USB QMP PHY (normally available on other SoCs like
sdm845) instead of v5 QMP USB UNI PHY available on SC8280XP.
So, I think the original patch is correct.
Thanks,
Bhupesh
> > + reg = <0x0 0x01615200 0x0 0x200>,
> > + <0x0 0x01615400 0x0 0x200>,
> > + <0x0 0x01615c00 0x0 0x400>,
> > + <0x0 0x01615600 0x0 0x200>,
> > + <0x0 0x01615800 0x0 0x200>,
> > + <0x0 0x01615a00 0x0 0x100>;
> > + #clock-cells = <0>;
> > + #phy-cells = <0>;
> > + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> > + clock-names = "pipe0";
> > + clock-output-names = "usb3_phy_pipe_clk_src";
> > + };
> > + };
> > +
> > qfprom@...0000 {
> > compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
> > reg = <0x0 0x01b40000 0x0 0x7000>;
> > @@ -1100,8 +1132,8 @@ usb_dwc3: usb@...0000 {
> > compatible = "snps,dwc3";
> > reg = <0x0 0x04e00000 0x0 0xcd00>;
> > interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> > - phys = <&usb_hsphy>;
> > - phy-names = "usb2-phy";
> > + phys = <&usb_hsphy>, <&usb_ssphy>;
> > + phy-names = "usb2-phy", "usb3-phy";
> > iommus = <&apps_smmu 0x120 0x0>;
> > snps,dis_u2_susphy_quirk;
> > snps,dis_enblslpm_quirk;
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> > index 10c9d338446c..d60cc024749b 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> > @@ -280,6 +280,9 @@ &usb {
> > &usb_dwc3 {
> > maximum-speed = "high-speed";
> > dr_mode = "peripheral";
> > +
> > + phys = <&usb_hsphy>;
> > + phy-names = "usb2-phy";
> > };
> >
> > &usb_hsphy {
> > --
> > 2.38.1
> >
>
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists