linux-kernel - Re: [PATCH] net/mlx5: stop waiting for PCI link if reset is required

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230405210613.GA3638573@bhelgaas>
Date:   Wed, 5 Apr 2023 16:06:13 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Niklas Schnelle <schnelle@...ux.ibm.com>
Cc:     Leon Romanovsky <leon@...nel.org>,
        Saeed Mahameed <saeedm@...dia.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Gerd Bayer <gbayer@...ux.ibm.com>,
        Alexander Schmidt <alexs@...ux.ibm.com>,
        netdev@...r.kernel.org, linux-rdma@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net/mlx5: stop waiting for PCI link if reset is required

On Tue, Apr 04, 2023 at 05:27:35PM +0200, Niklas Schnelle wrote:
> On Mon, 2023-04-03 at 21:21 +0300, Leon Romanovsky wrote:
> > On Mon, Apr 03, 2023 at 09:56:56AM +0200, Niklas Schnelle wrote:
> > > after an error on the PCI link, the driver does not need to wait
> > > for the link to become functional again as a reset is required. Stop
> > > the wait loop in this case to accelerate the recovery flow.
> > > 
> > > Co-developed-by: Alexander Schmidt <alexs@...ux.ibm.com>
> > > Signed-off-by: Alexander Schmidt <alexs@...ux.ibm.com>
> > > Signed-off-by: Niklas Schnelle <schnelle@...ux.ibm.com>
> > > ---
> > >  drivers/net/ethernet/mellanox/mlx5/core/health.c | 12 ++++++++++--
> > >  1 file changed, 10 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
> > > index f9438d4e43ca..81ca44e0705a 100644
> > > --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
> > > +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
> > > @@ -325,6 +325,8 @@ int mlx5_health_wait_pci_up(struct mlx5_core_dev *dev)
> > >  	while (sensor_pci_not_working(dev)) {
> > 
> > According to the comment in sensor_pci_not_working(), this loop is
> > supposed to wait till PCI will be ready again. Otherwise, already in
> > first iteration, we will bail out with pci_channel_offline() error.
> 
> Well yes. The problem is that this works for intermittent errors
> including when the card resets itself which seems to be the use case in
> mlx5_fw_reset_complete_reload() and mlx5_devlink_reload_fw_activate().
> If there is a PCI error that requires a link reset though we see some
> problems though it does work after running into the timeout.
> 
> As I understand it and as implemented at least on s390,
> pci_channel_io_frozen is only set for fatal errors that require a reset
> while non fatal errors will have pci_channel_io_normal (see also
> Documentation/PCI/pcieaer-howto.rst)

Yes, I think that's true, see handle_error_source().

> thus I think pci_channel_offline()
> should only be true if a reset is required or there is a permanent
> error.

Yes, I think pci_channel_offline() will only be true when a fatal
error has been reported via AER or DPC (or a hotplug driver says the
device has been removed).  The driver resetting the device should not
cause such a fatal error.

> Furthermore in the pci_channel_io_frozen state the PCI function
> may be isolated and the reads will not reach the endpoint, this is the
> case at least on s390.  Thus for errors requiring a reset the loop
> without pci_channel_offline() will run until the reset is performed or
> the timeout is reached. In the mlx5_health_try_recover() case during
> error recovery we will then indeed always loop until timeout, because
> the loop blocks mlx5_pci_err_detected() from returning thus blocking
> the reset (see Documentation/PCI/pci-error-recovery.rst). Adding Bjorn,
> maybe he can confirm or correct my assumptions here.

> > >  		if (time_after(jiffies, end))
> > >  			return -ETIMEDOUT;
> > > +		if (pci_channel_offline(dev->pdev))
> > > +			return -EIO;
> > >  		msleep(100);
> > >  	}
> > >  	return 0;
> > > @@ -332,10 +334,16 @@ int mlx5_health_wait_pci_up(struct mlx5_core_dev *dev)
> > >  
> > >  static int mlx5_health_try_recover(struct mlx5_core_dev *dev)
> > >  {
> > > +	int rc;
> > > +
> > >  	mlx5_core_warn(dev, "handling bad device here\n");
> > >  	mlx5_handle_bad_state(dev);
> > > -	if (mlx5_health_wait_pci_up(dev)) {
> > > -		mlx5_core_err(dev, "health recovery flow aborted, PCI reads still not working\n");
> > > +	rc = mlx5_health_wait_pci_up(dev);
> > > +	if (rc) {
> > > +		if (rc == -ETIMEDOUT)
> > > +			mlx5_core_err(dev, "health recovery flow aborted, PCI reads still not working\n");
> > > +		else
> > > +			mlx5_core_err(dev, "health recovery flow aborted, PCI channel offline\n");
> > >  		return -EIO;
> > >  	}
> > >  	mlx5_core_err(dev, "starting health recovery flow\n");
> > > 
> > > base-commit: 7e364e56293bb98cae1b55fd835f5991c4e96e7d
> > > -- 
> > > 2.37.2
> > > 
>