| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a66878525affbc5db9fe1423018ba6250c03ae19.1680688209.git.quic_varada@quicinc.com>
Date: Wed, 5 Apr 2023 15:24:04 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <vkoul@...nel.org>,
<kishon@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <gregkh@...uxfoundation.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<quic_wcheng@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-clk@...r.kernel.org>
CC: Varadarajan Narayanan <quic_varada@...cinc.com>
Subject: [PATCH v7 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes
Add USB phy and controller related nodes
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
---
Changes in v7:
- Change com_aux -> cfg_ahb
Changes in v6:
- Introduce fixed regulators for the phy
- Resolved all 'make dtbs_check' messages
Changes in v5:
- Fix additional comments
- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
- 'make dtbs_check' giving the following messages since
ipq9574 doesn't have power domains. Hope this is ok
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@...00: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@...0000: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
Changes in v4:
- Use newer bindings without subnodes
- Fix coding style issues
Changes in v3:
- Insert the nodes at proper location
Changes in v2:
- Fixed issues flagged by Krzysztof
- Fix issues reported by make dtbs_check
- Remove NOC related clocks (to be added with proper
interconnect support)
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 43a3dbe..10a8b95 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -150,6 +150,33 @@
method = "smc";
};
+ reg_usb_3p3: s3300 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb-phy-vdd-dummy";
+ };
+
+ reg_usb_1p8: s1800 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb-phy-pll-dummy";
+ };
+
+ reg_usb_0p925: s0925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb-phy-dummy";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -179,6 +206,52 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ usb_0_qusbphy: phy@...00 {
+ compatible = "qcom,ipq9574-qusb2-phy";
+ reg = <0x0007b000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo_board_clk>;
+ clock-names = "cfg_ahb",
+ "ref";
+
+ vdd-supply = <®_usb_0p925>;
+ vdda-pll-supply = <®_usb_1p8>;
+ vdda-phy-dpdm-supply = <®_usb_3p3>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
+ };
+
+ usb_0_qmpphy: phy@...00 {
+ compatible = "qcom,ipq9574-qmp-usb3-phy";
+ reg = <0x0007d000 0xa00>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_AUX_CLK>,
+ <&xo_board_clk>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>,
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ vdda-pll-supply = <®_usb_1p8>;
+ vdda-phy-supply = <®_usb_0p925>;
+
+ status = "disabled";
+
+ #clock-cells = <0>;
+ clock-output-names = "usb0_pipe_clk";
+ };
+
pcie0_phy: phy@...00 {
compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
reg = <0x00084000 0x1000>;
@@ -548,6 +621,53 @@
status = "disabled";
};
+ usb3: usb@...0000 {
+ compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SNOC_USB_CLK>,
+ <&gcc GCC_ANOC_USB_AXI_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+ clock-names = "cfg_noc",
+ "iface",
+ "core",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <200000000>,
+ <24000000>;
+
+ interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event";
+
+ resets = <&gcc GCC_USB_BCR>;
+ status = "disabled";
+
+ dwc_0: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xcd00>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
intc: interrupt-controller@...0000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
--
2.7.4
Powered by blists - more mailing lists