[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230405125759.4201-4-quic_kriskura@quicinc.com>
Date: Wed, 5 Apr 2023 18:27:54 +0530
From: Krishna Kurapati <quic_kriskura@...cinc.com>
To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
"Andy Gross" <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
"Konrad Dybcio" <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<quic_pkondeti@...cinc.com>, <quic_ppratap@...cinc.com>,
<quic_wcheng@...cinc.com>, <quic_jackp@...cinc.com>,
<quic_harshq@...cinc.com>, <ahalaney@...hat.com>,
<quic_shazhuss@...cinc.com>,
Krishna Kurapati <quic_kriskura@...cinc.com>
Subject: [PATCH v6 3/8] usb: dwc3: core: Skip setting event buffers for host only controllers
On some SoC's like SA8295P where the tertiary controller is host-only
capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
Trying to setup them up during core_init leads to a crash.
For DRD/Peripheral supported controllers, event buffer setup is done
again in gadget_pullup. Skip setup or cleanup of event buffers if
controller is host-only capable.
Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
---
Link to v5: https://lore.kernel.org/all/20230310163420.7582-4-quic_kriskura@quicinc.com/
drivers/usb/dwc3/core.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 567ae79389a1..2964bcaa0a27 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -839,7 +839,11 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
static void dwc3_core_exit(struct dwc3 *dwc)
{
- dwc3_event_buffers_cleanup(dwc);
+ unsigned int hw_mode;
+
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
+ dwc3_event_buffers_cleanup(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
@@ -1176,10 +1180,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (ret < 0)
goto err3;
- ret = dwc3_event_buffers_setup(dwc);
- if (ret) {
- dev_err(dwc->dev, "failed to setup event buffers\n");
- goto err4;
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) {
+ ret = dwc3_event_buffers_setup(dwc);
+ if (ret) {
+ dev_err(dwc->dev, "failed to setup event buffers\n");
+ goto err4;
+ }
}
/*
@@ -2002,7 +2008,9 @@ static int dwc3_probe(struct platform_device *pdev)
err5:
dwc3_debugfs_exit(dwc);
- dwc3_event_buffers_cleanup(dwc);
+
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
+ dwc3_event_buffers_cleanup(dwc);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
--
2.40.0
Powered by blists - more mailing lists