| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230406195045.GA3729127@bhelgaas>
Date: Thu, 6 Apr 2023 14:50:45 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Grant Grundler <grundler@...omium.org>
Cc: Mahesh J Salgaonkar <mahesh@...ux.ibm.com>,
Oliver O 'Halloran <oohall@...il.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Rajat Jain <rajatja@...omium.org>,
Rajat Khandelwal <rajat.khandelwal@...ux.intel.com>,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org
Subject: Re: [PATCHv2 pci-next 2/2] PCI/AER: Rate limit the reporting of the
correctable errors
On Fri, Mar 17, 2023 at 10:51:09AM -0700, Grant Grundler wrote:
> From: Rajat Khandelwal <rajat.khandelwal@...ux.intel.com>
>
> There are many instances where correctable errors tend to inundate
> the message buffer. We observe such instances during thunderbolt PCIe
> tunneling.
>
> It's true that they are mitigated by the hardware and are non-fatal
> but we shouldn't be spamming the logs with such correctable errors as it
> confuses other kernel developers less familiar with PCI errors, support
> staff, and users who happen to look at the logs, hence rate limit them.
>
> A typical example log inside an HP TBT4 dock:
> [54912.661142] pcieport 0000:00:07.0: AER: Multiple Corrected error received: 0000:2b:00.0
> [54912.661194] igc 0000:2b:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [54912.661203] igc 0000:2b:00.0: device [8086:5502] error status/mask=00001100/00002000
> [54912.661211] igc 0000:2b:00.0: [ 8] Rollover
> [54912.661219] igc 0000:2b:00.0: [12] Timeout
> [54982.838760] pcieport 0000:00:07.0: AER: Corrected error received: 0000:2b:00.0
> [54982.838798] igc 0000:2b:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [54982.838808] igc 0000:2b:00.0: device [8086:5502] error status/mask=00001000/00002000
> [54982.838817] igc 0000:2b:00.0: [12] Timeout
The timestamps don't contribute to understanding the problem, so we
can omit them.
> This gets repeated continuously, thus inundating the buffer.
>
> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@...ux.intel.com>
> Signed-off-by: Grant Grundler <grundler@...omium.org>
> ---
> drivers/pci/pcie/aer.c | 42 ++++++++++++++++++++++++++++--------------
> 1 file changed, 28 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index cb6b96233967..b592cea8bffe 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -706,8 +706,8 @@ static void __aer_print_error(struct pci_dev *dev,
> errmsg = "Unknown Error Bit";
>
> if (info->severity == AER_CORRECTABLE)
> - pci_info(dev, " [%2d] %-22s%s\n", i, errmsg,
> - info->first_error == i ? " (First)" : "");
> + pci_info_ratelimited(dev, " [%2d] %-22s%s\n", i, errmsg,
> + info->first_error == i ? " (First)" : "");
I don't think this is going to reliably work the way we want. We have
a bunch of pci_info_ratelimited() calls, and each caller has its own
ratelimit_state data. Unless we call pci_info_ratelimited() exactly
the same number of times for each error, the ratelimit counters will
get out of sync and we'll end up printing fragments from error A mixed
with fragments from error B.
I think we need to explicitly manage the ratelimiting ourselves,
similar to print_hmi_event_info() or print_extlog_rcd(). Then we can
have a *single* ratelimit_state, and we can check it once to determine
whether to log this correctable error.
> else
> pci_err(dev, " [%2d] %-22s%s\n", i, errmsg,
> info->first_error == i ? " (First)" : "");
> @@ -719,7 +719,6 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
> {
> int layer, agent;
> int id = ((dev->bus->number << 8) | dev->devfn);
> - const char *level;
>
> if (!info->status) {
> pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent ID)\n",
> @@ -730,14 +729,21 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
> layer = AER_GET_LAYER_ERROR(info->severity, info->status);
> agent = AER_GET_AGENT(info->severity, info->status);
>
> - level = (info->severity == AER_CORRECTABLE) ? KERN_INFO : KERN_ERR;
> + if (info->severity == AER_CORRECTABLE) {
> + pci_info_ratelimited(dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
> + aer_error_severity_string[info->severity],
> + aer_error_layer[layer], aer_agent_string[agent]);
>
> - pci_printk(level, dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
> - aer_error_severity_string[info->severity],
> - aer_error_layer[layer], aer_agent_string[agent]);
> + pci_info_ratelimited(dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
> + dev->vendor, dev->device, info->status, info->mask);
> + } else {
> + pci_err(dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
> + aer_error_severity_string[info->severity],
> + aer_error_layer[layer], aer_agent_string[agent]);
>
> - pci_printk(level, dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
> - dev->vendor, dev->device, info->status, info->mask);
> + pci_err(dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
> + dev->vendor, dev->device, info->status, info->mask);
> + }
>
> __aer_print_error(dev, info);
>
> @@ -757,11 +763,19 @@ static void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
> u8 bus = info->id >> 8;
> u8 devfn = info->id & 0xff;
>
> - pci_info(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
> - info->multi_error_valid ? "Multiple " : "",
> - aer_error_severity_string[info->severity],
> - pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
> - PCI_FUNC(devfn));
> + if (info->severity == AER_CORRECTABLE)
> + pci_info_ratelimited(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
> + info->multi_error_valid ? "Multiple " : "",
> + aer_error_severity_string[info->severity],
> + pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
> + PCI_FUNC(devfn));
> + else
> + pci_info(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
> + info->multi_error_valid ? "Multiple " : "",
> + aer_error_severity_string[info->severity],
> + pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
> + PCI_FUNC(devfn));
> +
> }
>
> #ifdef CONFIG_ACPI_APEI_PCIEAER
> --
> 2.40.0.rc1.284.g88254d51c5-goog
>
Powered by blists - more mailing lists