[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZC+1rKoUNsqrjjtw@yilunxu-OptiPlex-7050>
Date: Fri, 7 Apr 2023 14:18:20 +0800
From: Xu Yilun <yilun.xu@...el.com>
To: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Cc: Wu Hao <hao.wu@...el.com>, Tom Rix <trix@...hat.com>,
Moritz Fischer <mdf@...nel.org>, linux-fpga@...r.kernel.org,
Lee Jones <lee@...nel.org>, Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
linux-hwmon@...r.kernel.org,
Russ Weight <russell.h.weight@...el.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/4] mfd: intel-m10-bmc: Manage access to MAX 10 fw
handshake registers
On 2023-04-05 at 11:01:52 +0300, Ilpo Järvinen wrote:
> On some MAX 10 cards, the BMC firmware is not available to service
> handshake registers during secure update erase and write phases at
> normal speeds. This problem affects at least hwmon driver. When the MAX
> 10 hwmon driver tries to read the sensor values during a secure update,
> the reads are slowed down (e.g., reading all D5005 sensors takes ~24s
> which is magnitudes worse than the normal <0.02s).
>
> Manage access to the handshake registers using a rw semaphore and a FW
> state variable to prevent accesses during those secure update phases
> and return -EBUSY instead.
>
> Co-developed-by: Russ Weight <russell.h.weight@...el.com>
> Signed-off-by: Russ Weight <russell.h.weight@...el.com>
> Co-developed-by: Xu Yilun <yilun.xu@...el.com>
> Signed-off-by: Xu Yilun <yilun.xu@...el.com>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> ---
> drivers/fpga/intel-m10-bmc-sec-update.c | 17 +++++--
> drivers/mfd/intel-m10-bmc-core.c | 63 ++++++++++++++++++++++++-
> drivers/mfd/intel-m10-bmc-pmci.c | 4 ++
> drivers/mfd/intel-m10-bmc-spi.c | 14 ++++++
> include/linux/mfd/intel-m10-bmc.h | 27 +++++++++++
> 5 files changed, 120 insertions(+), 5 deletions(-)
>
[...]
>
> +void m10bmc_fw_state_set(struct intel_m10bmc *m10bmc, enum m10bmc_fw_state new_state)
> +{
> + down_write(&m10bmc->bmcfw_lock);
> + m10bmc->bmcfw_state = new_state;
> + up_write(&m10bmc->bmcfw_lock);
Could we also skip this if no handshake is possible like for PMCI?
Thanks,
Yilun
Powered by blists - more mailing lists