| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230407183546.ku22vluiu44pyvrp@ripper>
Date: Fri, 7 Apr 2023 11:35:46 -0700
From: Bjorn Andersson <andersson@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Robert Marko <robimarko@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/5] arm64: dts: qcom: Add initial QCM2290 device tree
On Wed, Apr 05, 2023 at 05:50:32PM +0200, Konrad Dybcio wrote:
> Add an initial device tree for the QCM2290 low-end SoC, featuring 4
> "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X).
>
> This revision brings support for:
> - TSENS & thermal zones
> - SDHCI1/2
> - I2C, SPI, UART
> - MPSS
> - ADSP
> - Wi-Fi
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++
> 2 files changed, 1562 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1a29403400b7..6fc8d6664f0c 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
I moved this to the patch that actually introduces rb1.dts
Thanks,
Bjorn
> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> new file mode 100644
> index 000000000000..ae5abc76bcc7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> @@ -0,0 +1,1561 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2023, Linaro Ltd
> + *
> + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/firmware/qcom,scm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen { };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32764>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x0>;
> + clocks = <&cpufreq_hw 0>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x1>;
> + clocks = <&cpufreq_hw 0>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x2>;
> + clocks = <&cpufreq_hw 0>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x3>;
> + clocks = <&cpufreq_hw 0>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-qcm2290", "qcom,scm";
> + clocks = <&rpmcc RPM_SMD_CE1_CLK>;
> + clock-names = "core";
> + #reset-cells = <1>;
> + };
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0 0x40000000 0 0>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hyp_mem: hyp@...00000 {
> + reg = <0x0 0x45700000 0x0 0x600000>;
> + no-map;
> + };
> +
> + xbl_aop_mem: xbl-aop@...00000 {
> + reg = <0x0 0x45e00000 0x0 0x140000>;
> + no-map;
> + };
> +
> + sec_apps_mem: sec-apps@...ff000 {
> + reg = <0x0 0x45fff000 0x0 0x1000>;
> + no-map;
> + };
> +
> + smem_mem: smem@...00000 {
> + compatible = "qcom,smem";
> + reg = <0x0 0x46000000 0x0 0x200000>;
> + no-map;
> +
> + hwlocks = <&tcsr_mutex 3>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + };
> +
> + pil_modem_mem: modem@...00000 {
> + reg = <0x0 0x4ab00000 0x0 0x6900000>;
> + no-map;
> + };
> +
> + pil_video_mem: video@...00000 {
> + reg = <0x0 0x51400000 0x0 0x500000>;
> + no-map;
> + };
> +
> + wlan_msa_mem: wlan-msa@...00000 {
> + reg = <0x0 0x51900000 0x0 0x100000>;
> + no-map;
> + };
> +
> + pil_adsp_mem: adsp@...00000 {
> + reg = <0x0 0x51a00000 0x0 0x1c00000>;
> + no-map;
> + };
> +
> + pil_ipa_fw_mem: ipa-fw@...00000 {
> + reg = <0x0 0x53600000 0x0 0x10000>;
> + no-map;
> + };
> +
> + pil_ipa_gsi_mem: ipa-gsi@...10000 {
> + reg = <0x0 0x53610000 0x0 0x5000>;
> + no-map;
> + };
> +
> + pil_gpu_mem: zap@...15000 {
> + compatible = "shared-dma-pool";
> + reg = <0x0 0x53615000 0x0 0x2000>;
> + no-map;
> + };
> +
> + cont_splash_memory: framebuffer@...00000 {
> + reg = <0x0 0x5c000000 0x0 0x00f00000>;
> + no-map;
> + };
> +
> + dfps_data_memory: dpfs-data@...00000 {
> + reg = <0x0 0x5cf00000 0x0 0x0100000>;
> + no-map;
> + };
> +
> + removed_mem: reserved@...00000 {
> + reg = <0x0 0x60000000 0x0 0x3900000>;
> + no-map;
> + };
> +
> + rmtfs_mem: memory@...01000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0x89b01000 0x0 0x200000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
> + };
> + };
> +
> + rpm-glink {
> + compatible = "qcom,glink-rpm";
> + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + mboxes = <&apcs_glb 0>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-qcm2290";
> + qcom,glink-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + #clock-cells = <1>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,qcm2290-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_min_svs: opp1 {
> + opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> + };
> +
> + rpmpd_opp_low_svs: opp2 {
> + opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> + };
> +
> + rpmpd_opp_svs: opp3 {
> + opp-level = <RPM_SMD_LEVEL_SVS>;
> + };
> +
> + rpmpd_opp_svs_plus: opp4 {
> + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> + };
> +
> + rpmpd_opp_nom: opp5 {
> + opp-level = <RPM_SMD_LEVEL_NOM>;
> + };
> +
> + rpmpd_opp_nom_plus: opp6 {
> + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> + };
> +
> + rpmpd_opp_turbo: opp7 {
> + opp-level = <RPM_SMD_LEVEL_TURBO>;
> + };
> +
> + rpmpd_opp_turbo_plus: opp8 {
> + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> + };
> + };
> + };
> + };
> + };
> +
> + smp2p-adsp {
> + compatible = "qcom,smp2p";
> + qcom,smem = <443>, <429>;
> +
> + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs_glb 10>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <2>;
> +
> + adsp_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + adsp_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-mpss {
> + compatible = "qcom,smp2p";
> + qcom,smem = <435>, <428>;
> +
> + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs_glb 14>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + modem_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + modem_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + wlan_smp2p_in: wlan-wpss-to-ap {
> + qcom,entry-name = "wlan";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + soc: soc@0 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0 0 0 0 0x10 0>;
> + dma-ranges = <0 0 0 0 0x10 0>;
> +
> + tcsr_mutex: hwlock@...000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x00340000 0x0 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + tlmm: pinctrl@...000 {
> + compatible = "qcom,qcm2290-tlmm";
> + reg = <0x0 0x00500000 0x0 0x300000>;
> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + gpio-ranges = <&tlmm 0 0 127>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + qup_i2c0_default: qup-i2c0-default-state {
> + pins = "gpio0", "gpio1";
> + function = "qup0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c1_default: qup-i2c1-default-state {
> + pins = "gpio4", "gpio5";
> + function = "qup1";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c2_default: qup-i2c2-default-state {
> + pins = "gpio6", "gpio7";
> + function = "qup2";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c3_default: qup-i2c3-default-state {
> + pins = "gpio8", "gpio9";
> + function = "qup3";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c4_default: qup-i2c4-default-state {
> + pins = "gpio12", "gpio13";
> + function = "qup4";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c5_default: qup-i2c5-default-state {
> + pins = "gpio14", "gpio15";
> + function = "qup5";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi0_default: qup-spi0-default-state {
> + pins = "gpio0", "gpio1","gpio2", "gpio3";
> + function = "qup0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi1_default: qup-spi1-default-state {
> + pins = "gpio4", "gpio5", "gpio69", "gpio70";
> + function = "qup1";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi2_default: qup-spi2-default-state {
> + pins = "gpio6", "gpio7", "gpio71", "gpio80";
> + function = "qup2";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi3_default: qup-spi3-default-state {
> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
> + function = "qup3";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi4_default: qup-spi4-default-state {
> + pins = "gpio12", "gpio13", "gpio96", "gpio97";
> + function = "qup4";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi5_default: qup-spi5-default-state {
> + pins = "gpio14", "gpio15", "gpio16", "gpio17";
> + function = "qup5";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_uart0_default: qup-uart0-default-state {
> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
> + function = "qup0";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + qup_uart4_default: qup-uart4-default-state {
> + pins = "gpio12", "gpio13";
> + function = "qup4";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + sdc1_state_on: sdc1-on-state {
> + clk-pins {
> + pins = "sdc1_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc1_cmd";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc1_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + rclk-pins {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> +
> + sdc1_state_off: sdc1-off-state {
> + clk-pins {
> + pins = "sdc1_clk";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc1_cmd";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc1_data";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + rclk-pins {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> +
> + sdc2_state_on: sdc2-on-state {
> + clk-pins {
> + pins = "sdc2_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc2_cmd";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc2_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> + };
> +
> + sdc2_state_off: sdc2-off-state {
> + clk-pins {
> + pins = "sdc2_clk";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc2_cmd";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc2_data";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> + };
> +
> + gcc: clock-controller@...0000 {
> + compatible = "qcom,gcc-qcm2290";
> + reg = <0x0 0x01400000 0x0 0x1f0000>;
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
> + clock-names = "bi_tcxo", "sleep_clk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + usb_hsphy: phy@...3000 {
> + compatible = "qcom,qcm2290-qusb2-phy";
> + reg = <0x0 0x01613000 0x0 0x180>;
> +
> + clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "cfg_ahb", "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + nvmem-cells = <&qusb2_hstx_trim>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + qfprom@...4000 {
> + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
> + reg = <0x0 0x01b44000 0x0 0x3000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + qusb2_hstx_trim: hstx-trim@25b {
> + reg = <0x25b 0x1>;
> + bits = <1 4>;
> + };
> + };
> +
> + spmi_bus: spmi@...0000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0x0 0x01c40000 0x0 0x1100>,
> + <0x0 0x01e00000 0x0 0x2000000>,
> + <0x0 0x03e00000 0x0 0x100000>,
> + <0x0 0x03f00000 0x0 0xa0000>,
> + <0x0 0x01c0a000 0x0 0x26000>;
> + reg-names = "core",
> + "chnls",
> + "obsrvr",
> + "intr",
> + "cnfg";
> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "periph_irq";
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + };
> +
> + tsens0: thermal-sensor@...1000 {
> + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x04411000 0x0 0x1ff>,
> + <0x0 0x04410000 0x0 0x8>;
> + #qcom,sensors = <10>;
> + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + rng: rng@...3000 {
> + compatible = "qcom,prng-ee";
> + reg = <0x0 0x04453000 0x0 0x1000>;
> + clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
> + clock-names = "core";
> + };
> +
> + rpm_msg_ram: sram@...0000 {
> + compatible = "qcom,rpm-msg-ram";
> + reg = <0x0 0x045f0000 0x0 0x7000>;
> + };
> +
> + sram@...0000 {
> + compatible = "qcom,rpm-stats";
> + reg = <0x0 0x04690000 0x0 0x10000>;
> + };
> +
> + sdhc_1: mmc@...4000 {
> + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x0 0x04744000 0x0 0x1000>,
> + <0x0 0x04745000 0x0 0x1000>,
> + <0x0 0x04748000 0x0 0x8000>;
> + reg-names = "hc",
> + "cqhci",
> + "ice";
> +
> + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>,
> + <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> + clock-names = "iface",
> + "core",
> + "xo",
> + "ice";
> +
> + resets = <&gcc GCC_SDCC1_BCR>;
> +
> + power-domains = <&rpmpd QCM2290_VDDCX>;
> + iommus = <&apps_smmu 0xc0 0x0>;
> +
> + qcom,dll-config = <0x000f642c>;
> + qcom,ddr-config = <0x80040868>;
> + bus-width = <8>;
> +
> + status = "disabled";
> + };
> +
> + sdhc_2: mmc@...4000 {
> + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0x0 0x04784000 0x0 0x1000>;
> + reg-names = "hc";
> +
> + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "iface",
> + "core",
> + "xo";
> +
> + resets = <&gcc GCC_SDCC2_BCR>;
> +
> + power-domains = <&rpmpd QCM2290_VDDCX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> + iommus = <&apps_smmu 0xa0 0x0>;
> +
> + qcom,dll-config = <0x0007642c>;
> + qcom,ddr-config = <0x80040868>;
> + bus-width = <4>;
> +
> + status = "disabled";
> +
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmpd_opp_low_svs>;
> + };
> +
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmpd_opp_svs_plus>;
> + };
> + };
> + };
> +
> + gpi_dma0: dma-controller@...0000 {
> + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
> + reg = <0x0 0x04a00000 0x0 0x60000>;
> + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
> + dma-channels = <10>;
> + dma-channel-mask = <0x1f>;
> + iommus = <&apps_smmu 0xf6 0x0>;
> + #dma-cells = <3>;
> + status = "disabled";
> + };
> +
> + qupv3_id_0: geniqup@...0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0x04ac0000 0x0 0x2000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + clock-names = "m-ahb", "s-ahb";
> + iommus = <&apps_smmu 0xe3 0x0>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + i2c0: i2c@...0000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x04a80000 0x0 0x4000>;
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_i2c0_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi0: spi@...0000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x04a80000 0x0 0x4000>;
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_spi0_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart0: serial@...0000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0x04a80000 0x0 0x4000>;
> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_uart0_default>;
> + pinctrl-names = "default";
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...4000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x04a84000 0x0 0x4000>;
> + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_i2c1_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi1: spi@...4000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x04a84000 0x0 0x4000>;
> + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_spi1_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...8000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x04a88000 0x0 0x4000>;
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_i2c2_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi2: spi@...8000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x04a88000 0x0 0x4000>;
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_spi2_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@...c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x04a8c000 0x0 0x4000>;
> + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_i2c3_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi3: spi@...c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x04a8c000 0x0 0x4000>;
> + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_spi3_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@...0000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x04a90000 0x0 0x4000>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_i2c4_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi4: spi@...0000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x04a90000 0x0 0x4000>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi4_default>;
> + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart4: serial@...0000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0x04a90000 0x0 0x4000>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_uart4_default>;
> + pinctrl-names = "default";
> + status = "disabled";
> + };
> +
> + i2c5: i2c@...4000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0x0 0x04a94000 0x0 0x4000>;
> + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_i2c5_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
> + <&gpi_dma0 1 5 QCOM_GPI_I2C>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi5: spi@...4000 {
> + compatible = "qcom,geni-spi";
> + reg = <0x0 0x04a94000 0x0 0x4000>;
> + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + clock-names = "se";
> + pinctrl-0 = <&qup_spi5_default>;
> + pinctrl-names = "default";
> + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
> + <&gpi_dma0 1 5 QCOM_GPI_SPI>;
> + dma-names = "tx", "rx";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> + usb: usb@...8800 {
> + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
> + reg = <0x0 0x04ef8800 0x0 0x400>;
> + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hs_phy_irq", "ss_phy_irq";
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
> + clock-names = "cfg_noc",
> + "core",
> + "iface",
> + "sleep",
> + "mock_utmi",
> + "xo";
> +
> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <133333333>;
> +
> + resets = <&gcc GCC_USB30_PRIM_BCR>;
> + power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> + wakeup-source;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + status = "disabled";
> +
> + usb_dwc3: usb@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x04e00000 0x0 0xcd00>;
> + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&usb_hsphy>;
> + phy-names = "usb2-phy";
> + iommus = <&apps_smmu 0x120 0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> + snps,has-lpm-erratum;
> + snps,hird-threshold = /bits/ 8 <0x10>;
> + snps,usb3_lpm_capable;
> + maximum-speed = "super-speed";
> + dr_mode = "otg";
> + };
> + };
> +
> + remoteproc_mpss: remoteproc@...0000 {
> + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
> + reg = <0x0 0x06080000 0x0 0x100>;
> +
> + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack",
> + "shutdown-ack";
> +
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmpd QCM2290_VDDCX>;
> +
> + memory-region = <&pil_modem_mem>;
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
> + label = "mpss";
> + qcom,remote-pid = <1>;
> + mboxes = <&apcs_glb 12>;
> + };
> + };
> +
> + remoteproc_adsp: remoteproc@...0000 {
> + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
> + reg = <0x0 0x0ab00000 0x0 0x100>;
> +
> + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack";
> +
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
> + <&rpmpd QCM2290_VDD_LPI_MX>;
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
> + label = "lpass";
> + qcom,remote-pid = <2>;
> + mboxes = <&apcs_glb 8>;
> + };
> + };
> +
> + apps_smmu: iommu@...0000 {
> + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> + reg = <0x0 0x0c600000 0x0 0x80000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <1>;
> +
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + wifi: wifi@...0000 {
> + compatible = "qcom,wcn3990-wifi";
> + reg = <0x0 0x0c800000 0x0 0x800000>;
> + reg-names = "membase";
> + memory-region = <&wlan_msa_mem>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
> + iommus = <&apps_smmu 0x1a0 0x1>;
> + qcom,msa-fixed-perm;
> + status = "disabled";
> + };
> +
> + watchdog@...7000 {
> + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
> + reg = <0x0 0x0f017000 0x0 0x1000>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sleep_clk>;
> + };
> +
> + apcs_glb: mailbox@...1000 {
> + compatible = "qcom,qcm2290-apcs-hmss-global";
> + reg = <0x0 0x0f111000 0x0 0x1000>;
> + #mbox-cells = <1>;
> + };
> +
> + timer@...0000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0 0x0f120000 0x0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0x0f121000 0x8000>;
> +
> + frame@0 {
> + reg = <0x0 0x1000>,
> + <0x1000 0x1000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <0>;
> + };
> +
> + frame@...0 {
> + reg = <0x2000 0x1000>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <1>;
> + status = "disabled";
> + };
> +
> + frame@...0 {
> + reg = <0x3000 0x1000>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <2>;
> + status = "disabled";
> + };
> +
> + frame@...0 {
> + reg = <0x4000 0x1000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <3>;
> + status = "disabled";
> + };
> +
> + frame@...0 {
> + reg = <0x5000 0x1000>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <4>;
> + status = "disabled";
> + };
> +
> + frame@...0 {
> + reg = <0x6000 0x1000>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <5>;
> + status = "disabled";
> + };
> +
> + frame@...0 {
> + reg = <0x7000 0x1000>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <6>;
> + status = "disabled";
> + };
> + };
> +
> + intc: interrupt-controller@...0000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x0f200000 0x0 0x10000>,
> + <0x0 0x0f300000 0x0 0x100000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupt-parent = <&intc>;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + };
> +
> + cpufreq_hw: cpufreq@...1000 {
> + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
> + reg = <0x0 0x0f521000 0x0 0x1000>;
> + reg-names = "freq-domain0";
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "dcvsh-irq-0";
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> + #clock-cells = <1>;
> + };
> + };
> +
> + thermal-zones {
> + mapss-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 0>;
> +
> + trips {
> + mapss_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + mapss_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + mapss_crit: mapss-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + video-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 1>;
> +
> + trips {
> + video_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + video_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + video_crit: video-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + wlan-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 2>;
> +
> + trips {
> + wlan_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + wlan_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + wlan_crit: wlan-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpuss0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 3>;
> +
> + trips {
> + cpuss0_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpuss0_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpuss0_crit: cpuss0-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cpuss1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 4>;
> +
> + trips {
> + cpuss1_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpuss1_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpuss1_crit: cpuss1-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + mdm0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 5>;
> +
> + trips {
> + mdm0_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + mdm0_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + mdm0_crit: mdm0-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + mdm1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 6>;
> +
> + trips {
> + mdm1_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + mdm1_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + mdm1_crit: mdm1-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 7>;
> +
> + trips {
> + gpu_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + gpu_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + gpu_crit: gpu-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + hm-center-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 8>;
> +
> + trips {
> + hm_center_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + hm_center_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + hm_center_crit: hm-center-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + camera-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 9>;
> +
> + trips {
> + camera_alert0: trip-point0 {
> + temperature = <90000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + camera_alert1: trip-point1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + camera_crit: camera-crit {
> + temperature = <110000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
>
> --
> 2.40.0
>
Powered by blists - more mailing lists