[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <07b8731d-f9b6-c759-808d-56ae5881e251@linaro.org>
Date: Wed, 12 Apr 2023 23:07:24 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bartosz Golaszewski <brgl@...ev.pl>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-scsi@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS
On 11.04.2023 15:04, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Enable the UFS and its PHY on sa8775p-ride.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index f238a02a5448..2bb001a3ea55 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -5,6 +5,7 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>
> #include "sa8775p.dtsi"
> @@ -20,6 +21,7 @@ aliases {
> serial2 = &uart17;
> i2c18 = &i2c18;
> spi16 = &spi16;
> + ufshc1 = &ufs_mem_hc;
> };
>
> chosen {
> @@ -426,6 +428,23 @@ &uart17 {
> status = "okay";
> };
>
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
> + vcc-supply = <&vreg_l8a>;
> + vcc-max-microamp = <1100000>;
> + vccq-supply = <&vreg_l4c>;
> + vccq-max-microamp = <1200000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l4a>;
> + vdda-pll-supply = <&vreg_l1c>;
> +
> + status = "okay";
> +};
> +
> &xo_board_clk {
> clock-frequency = <38400000>;
> };
Powered by blists - more mailing lists