lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <517670ca-ba2e-811e-3eb2-7f38011c9690@linaro.org>
Date:   Wed, 12 Apr 2023 10:26:22 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Minda Chen <minda.chen@...rfivetech.com>,
        Emil Renner Berthing <emil.renner.berthing@...onical.com>,
        Conor Dooley <conor@...nel.org>, Vinod Koul <vkoul@...nel.org>,
        Kishon Vijay Abraham I <kishon@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Pawel Laszczak <pawell@...ence.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Peter Chen <peter.chen@...nel.org>,
        Roger Quadros <rogerq@...nel.org>,
        Philipp Zabel <p.zabel@...gutronix.de>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-phy@...ts.infradead.org, linux-usb@...r.kernel.org,
        linux-riscv@...ts.infradead.org,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Mason Huo <mason.huo@...rfivetech.com>
Subject: Re: [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support

On 06/04/2023 03:52, Minda Chen wrote:
> This patchset adds USB driver and USB PHY for the StarFive JH7110 SoC.
> USB work mode is peripheral and using USB 2.0 PHY in VisionFive 2 board.
> The patch has been tested on the VisionFive 2 board.
> 
> This patchset should be applied after the patchset [1], [2] and[3]:
> [1] https://patchwork.kernel.org/project/linux-riscv/cover/20230314124404.117592-1-xingyu.wu@starfivetech.com/
> [2] https://lore.kernel.org/all/20230315055813.94740-1-william.qiu@starfivetech.com/
> [3] https://patchwork.kernel.org/project/linux-phy/cover/20230315100421.133428-1-changhuang.liang@starfivetech.com/
> 
> This patchset is base on v6.3-rc4
> 
> patch 1 is usb phy dt-binding document.
> patch 2 is Pcie PHY dt-binding document.
> patch 3 is USB 2.0 PHY driver.
> patch 4 is PCIe PHY driver.
> patch 5 is usb dt-binding document.
> patch 6 is the wrapper module driver of Cadence USB3. USB controller IP is Cadence USB3.
> patch 7 is USB device tree configuration.
> 
> previous version
> ---
> v1: https://patchwork.kernel.org/project/linux-usb/cover/20230306095212.25840-1-minda.chen@starfivetech.com/
> v2: https://patchwork.kernel.org/project/linux-usb/cover/20230308082800.3008-1-minda.chen@starfivetech.com/

This is v2.

> v3: https://patchwork.kernel.org/project/linux-usb/cover/20230315104411.73614-1-minda.chen@starfivetech.com/
> 
> changes
> v4:
>   1. (patch 1) split PCIe PHY dt-binding doc to patch 2.
>   2. (patch 2) PCIe PHY add stg and sys con configuration to dt-binding doc.
>   3. (patch 3)
>      - split PCIe PHY driver to patch 4.
>      - replace dr_mode to phy mode in jh7110_usb2_phy.
>   4. (patch 4) 
>      - Makefile and Kconfig sorted by alphabet sequence.
>      - Add PCIe PHY stg and syscon PHY connection configuration
>        for USB 3.0.
>   5. (patch 5)
>      - commit message changed.
>      - merge wrapper dts node and cdns3 node in example.
>      - Add interrupts, reg, phy and dr_mode in property.
>      - Add reset-name in property example.
>   6. (patch 6)
>      - For dts node is merged, Using platform_device_alloc and
>        platform_device_add to generate cadence sub device.
>      - IOMEM and IRQ resource are passed to Cadence sub device.
>      - Add PHY ops process for PHY dts setting can not be passed to
>        Cadence USB driver.
>      - remove the stg and sys USB 3.0 PHY configuration.
>      - Change the suspend clock reset and clock enable sequence.
>      - Get all reset and clock resources before enable them in 
>        cdns_clk_rst_init.
>      - commit message changed.
>   7. (patch 7)
>      - merge wrapper dts node and cdns3 node in usb dts.
>      - move the stg and sys USB 3.0 PHY confiuration to
>        PCIe PHY dts node.
>      - commit message changed.
>      - Add reset-names dts.
> 
> v3:
>   1. Add patch 1 - 4. Add USB PHY driver and dt-binding doc. 
>      USB PHY codes are moved to patch 3 and patch 4.
>   2. (patch 5)
>      - USB wrapper module dts document is moved to usb directory.
>      - Remove the 'dr_mode' and 'starfive,usb2-only' setting.
>      - Some dts format changes. dts binding check pass.
>   3. (patch 6)
>      - Remove the PHY codes. 
>      - Search 'dr_mode' and phy setting from Cadence subnode.
>   4. (patch 7)
>      - Add USB PHY dts configurion. 
>      - 'dr_mode' is moved to Cadence controller submode.
> 
> v2:
>   1. (patch 5) dt-binding changes. The document example is the same as dts config.
>   2. (patch 6) using dev_err_probe and syscon_regmap_lookup_by_phandle_args function. Some formats changes
>   3. (patch 7) dts nodes sorted by the address after @
> 
> 
> Minda Chen (7):
>   dt-bindings: phy: Add StarFive JH7110 USB document
>   dt-bindings: phy: Add StarFive JH7110 PCIe document
>   phy: starfive: add JH7110 USB 2.0 PHY driver.
>   phy: starfive: add JH7110 PCIE 2.0 PHY driver.
>   dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas
>   usb: cdns3: add StarFive JH7110 USB driver.
>   riscv: dts: starfive: add USB dts configuration for JH7110
> 
>  .../phy/starfive,jh7110-pcie-phy.yaml         |  58 +++
>  .../bindings/phy/starfive,jh7110-usb-phy.yaml |  50 +++
>  .../bindings/usb/starfive,jh7110-usb.yaml     | 136 +++++++
>  MAINTAINERS                                   |  16 +
>  .../jh7110-starfive-visionfive-2.dtsi         |   7 +
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  44 ++
>  drivers/phy/starfive/Kconfig                  |  22 +
>  drivers/phy/starfive/Makefile                 |   2 +
>  drivers/phy/starfive/phy-jh7110-pcie.c        | 197 +++++++++
>  drivers/phy/starfive/phy-jh7110-usb.c         | 161 ++++++++
>  drivers/usb/cdns3/Kconfig                     |  11 +
>  drivers/usb/cdns3/Makefile                    |   1 +
>  drivers/usb/cdns3/cdns3-starfive.c            | 378 ++++++++++++++++++
>  drivers/usb/cdns3/core.h                      |   3 +
>  14 files changed, 1086 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>  create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>  create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
>  create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
> 
> 
> base-commit: 0ec57cfa721fbd36b4c4c0d9ccc5d78a78f7fa35
> prerequisite-patch-id: 24a6e3442ed1f5454ffb4a514cfd768436a87090
> prerequisite-patch-id: 55390537360f25c8b9cbfdc30b73ade004f436f7

fatal: bad object 55390537360f25c8b9cbfdc30b73ade004f436f7

What commits do you reference? How are they helpful?


Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ