[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d892f4d4-f311-4795-ded4-6b735739dd94@gmail.com>
Date: Wed, 12 Apr 2023 14:44:35 +0200
From: Matthias Brugger <matthias.bgg@...il.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Cc: p.zabel@...gutronix.de, airlied@...il.com, daniel@...ll.ch,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
jassisinghbrar@...il.com, chunfeng.yun@...iatek.com,
vkoul@...nel.org, kishon@...nel.org, thierry.reding@...il.com,
u.kleine-koenig@...gutronix.de, chunkuang.hu@...nel.org,
ck.hu@...iatek.com, jitao.shi@...iatek.com,
xinlei.lee@...iatek.com, houlong.wei@...iatek.com,
dri-devel@...ts.freedesktop.org,
linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-phy@...ts.infradead.org, linux-pwm@...r.kernel.org,
kernel@...labora.com, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH 26/27] arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch
BMA255 Accelerometer
On 12/04/2023 13:27, AngeloGioacchino Del Regno wrote:
> Add the BMA255 Accelerometer on I2C3 and its pin definitions.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Applied, thanks
> ---
> .../boot/dts/mediatek/mt6795-sony-xperia-m5.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> index 155a573eac4c..0b0519f6b2f1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> @@ -68,6 +68,13 @@ &i2c1 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
> status = "okay";
> +
> + accelerometer@10 {
> + compatible = "bosch,bma255";
> + reg = <0x10>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&accel_pins>;
> + };
> };
>
> &i2c2 {
> @@ -247,6 +254,14 @@ pins-irq {
> };
> };
>
> + accel_pins: accelerometer-pins {
> + pins-irq {
> + pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
> + bias-pull-up;
> + input-enable;
> + };
> + };
> +
> i2c0_pins: i2c0-pins {
> pins-bus {
> pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
Powered by blists - more mailing lists