[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230418050514.2392717-3-u-kumar1@ti.com>
Date: Tue, 18 Apr 2023 10:35:14 +0530
From: Udit Kumar <u-kumar1@...com>
To: <linux-arm-kernel@...ts.infradead.org>, <afd@...com>, <bb@...com>,
<vaishnav.a@...com>, <j-choudhary@...com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>
CC: Udit Kumar <u-kumar1@...com>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-j7200-som: Enable I2C
This patch enables wkup_i2c0 node in board dts file.
and underneath eeprom CAV24C256WE.
J7200 User Guide (Section 4.3, Table 4-2) :
https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf
Signed-off-by: Udit Kumar <u-kumar1@...com>
---
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index fa44ed4c17d5..137492ae89c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -214,6 +214,14 @@ exp_som: gpio@21 {
};
};
+&wkup_i2c0 {
+ status = "okay";
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
--
2.34.1
Powered by blists - more mailing lists