[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230418121446.wv5sng7i7n56yrtd@granny>
Date: Tue, 18 Apr 2023 07:14:46 -0500
From: Nishanth Menon <nm@...com>
To: Udit Kumar <u-kumar1@...com>
CC: <linux-arm-kernel@...ts.infradead.org>, <afd@...com>, <bb@...com>,
<vaishnav.a@...com>, <j-choudhary@...com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>
Subject: Re: [PATCH v2 2/2] arm64: dts: ti: k3-j7200-som: Enable I2C
On 10:35-20230418, Udit Kumar wrote:
> This patch enables wkup_i2c0 node in board dts file.
> and underneath eeprom CAV24C256WE.
>
> J7200 User Guide (Section 4.3, Table 4-2) :
> https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf
>
> Signed-off-by: Udit Kumar <u-kumar1@...com>
> ---
> arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> index fa44ed4c17d5..137492ae89c4 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> @@ -214,6 +214,14 @@ exp_som: gpio@21 {
> };
> };
>
> +&wkup_i2c0 {
> + status = "okay";
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + };
> +};
pinmux?
speed ?
> +
> &ospi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
> --
> 2.34.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists