linux-kernel - Re: [PATCH 3/3] arm64: dts: qcom: pm8953: add GPIOs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ff2dd271-71f7-47e0-b200-4edd2d692e71@linaro.org>
Date:   Sat, 22 Apr 2023 11:56:33 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Luca Weiss <luca@...tu.xyz>, ~postmarketos/upstreaming@...ts.sr.ht,
        phone-devel@...r.kernel.org, Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: pm8953: add GPIOs



On 21.04.2023 23:56, Luca Weiss wrote:
> Add a node for the GPIOs found on the pm8953.
> 
> Signed-off-by: Luca Weiss <luca@...tu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8953.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> index a1d36f9ebbd2..2268daf27fa7 100644
> --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> @@ -79,6 +79,16 @@ rtc@...0 {
>  			reg-names = "rtc", "alarm";
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
> +
> +		pm8953_gpios: gpio@...0 {
> +			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			gpio-ranges = <&pm8953_gpios 0 0 8>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>  	};
>  
>  	pmic@1 {
>