lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <14c06503-621f-2477-7b15-b17f1890ecfe@starfivetech.com>
Date:   Mon, 24 Apr 2023 19:19:20 +0800
From:   Jack Zhu <jack.zhu@...rfivetech.com>
To:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Robert Foss <rfoss@...nel.org>,
        "Todor Tomov" <todor.too@...il.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        "Laurent Pinchart" <laurent.pinchart@...asonboard.com>,
        Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Eugen Hristev <eugen.hristev@...labora.com>
CC:     <linux-media@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <changhuang.liang@...rfivetech.com>
Subject: Re: [PATCH v4 0/8] Add StarFive Camera Subsystem driver



On 2023/4/13 11:55, Jack Zhu wrote:
> Hi,
> 
> This patch series adds support for the StarFive Camera Subsystem
> found on StarFive JH7110 SoC.
> 
> The driver implements V4L2, Media controller and V4L2 subdev interfaces.
> Camera sensor using V4L2 subdev interface in the kernel is supported.
> 
> The driver is tested on VisionFive V2 board with IMX219 camera sensor.
> GStreamer 1.18.5 with v4l2src plugin is supported.
> 
> Changes since v3:
> Patch 1:
> - Modified port@0 and port@1 properties.
> - Extended the port@0 example with appropriate properties.
> - Added 'port@0' for 'required'
> Patch 2:
> - Modified spelling errors.
> Patch 3:
> - Merged patch 5 into the patch with an explanation for compatible in
>   commit msg.
> Patch 6:
> - Asserted pixel_rst[i] reset in the loop after the err_disable_pixclk
>   label.
> - Modified Code Style for getting sys_rst and p_rst.
> - Renamed clk_name to name and modified the relevant code.
> Patch 9:
> - Added static for stfcamss_get_mem_res function.
> - Added static for isp_close function.
> - Fixed implicit conversion warning for stf_vin_map_isp_pad function.
> - Dropped unused variables.
> 
>   v3: https://lore.kernel.org/all/20230331121826.96973-1-jack.zhu@starfivetech.com/
> 

Hello everyone,

>From the current review status, the patches related to the CSI module
have 'reviewed-by' tags. I would like to know if it is okay to add
patches 1-5 from this series to a PR first.

Thank you!

Jack

> Changes since v2:
> - Rebased on v6.3-rc1.
> Patch 1:
> - Modified spelling errors.
> - Added port@0.
> - Modified '$ref' of port.
> - Added 'ports' to 'required'.
> - Dropped 'stfcamss' label in example.
> - Added port@0 in example.
> - Added MAINTAINERS file.
> Patch 2:
> - Split this patch into three new patches.
> - Modified compatible property.
> - Replaced clock names with the existing names.
> - Modified 'bus-type' and 'clock-lanes'
> - Added port@2 - port@4
> - Dropped 'csi2rx' label in example.
> Patch 3:
> - Updated rst and dot file as three pipelines were deleted.
> Patch 4:
> - Split this patch into three new patches.
> - Dropped .s_power() and .get_fmt().
> - Dropped CSI-2 DT support.
> - Dropped v4l2_device_register_subdev_nodes().
> - Used assigned-clock-rates in DT to set clk value.
> - Modified 'compatible' field.
> Patch 5:
> - Deleted three pipelines. 
> - Modified 'stfcamss_clocks'/'stfcamss_resets' struct.
> - Dropped stfcamss_find_sensor() function.
> - Removed redundant code from stfcamss_of_parse_endpoint_node().
> - Modified spelling errors.
> - Rewrote stfcamss_reg_media_subdev_node() function.
> - Modified stfcamss_subdev_notifier_bound().
> - Modified stfcamss_probe() function.
> - Dropped stfcamss_suspend() and stfcamss_resume().
> - Dropped dev_info() in stfcamss_remove() function.
> - Added 'stf_' prefix for enum subdev_type.
> - Moved all includes to the top in stf_camss.h file.
> - Dropped unused fields in stfcamss struct.
> - Replaced Custom logging macros with regular macros.
> - Rewrote register read and write functions.
> - Used lowercase for all hex constants.
> - Used macro to name registers.
> - Dropped unused ioctl and stf_isp_ioctl.h file.
> 
>   v2: https://lore.kernel.org/all/20230310120553.60586-1-jack.zhu@starfivetech.com/
> 
> Changes since v1:
> - Deleted starfive,jh7110-mipi-csi2.yaml.
> - Converted cdns,csi2rx.txt to cdns,csi2rx.yaml and added ‘resets’
>   properties.
> - Added ‘cdns,csi2rx.yaml’ in ‘CADENCE MIPI-CSI2 BRIDGES’ entry.
> - The following contents were modified in starfive,jh7110-camss.yaml:
>   dropped quotes from ’id’ and ‘schema’; dropped ‘|’ for ‘description’;
>   corrected the wrong or redundant words: ‘a ISP’, ‘PD ISP’;
>   dropped ‘minItems’ for ‘reg’, ‘clocks’, ‘resets’ and ‘interrupts’;
>   dropped the '_clk' and 'rst_' prefix about the 'clock-names' and
>   'reset-names';
>   changed ‘endpoint@1’ to ‘endpoint’; updated examples;
> - Updated Subject for some patches.
> - Merged patch 6, 7, 8, 9, 10, 11 into one patch.
> 
> Jack Zhu (8):
>   media: dt-bindings: cadence-csi2rx: Convert to DT schema
>   media: dt-bindings: cadence-csi2rx: Add resets property
>   media: cadence: Add operation on reset
>   media: cadence: Add support for external dphy
>   media: cadence: Add support for JH7110 SoC
>   media: dt-bindings: Add bindings for JH7110 Camera Subsystem
>   media: admin-guide: Add starfive_camss.rst for Starfive Camera
>     Subsystem
>   media: starfive: Add Starfive Camera Subsystem driver
> 
>  .../admin-guide/media/starfive_camss.rst      |   57 +
>  .../media/starfive_camss_graph.dot            |   16 +
>  .../admin-guide/media/v4l-drivers.rst         |    1 +
>  .../devicetree/bindings/media/cdns,csi2rx.txt |  100 --
>  .../bindings/media/cdns,csi2rx.yaml           |  201 +++
>  .../bindings/media/starfive,jh7110-camss.yaml |  164 +++
>  MAINTAINERS                                   |   10 +
>  drivers/media/platform/Kconfig                |    1 +
>  drivers/media/platform/Makefile               |    1 +
>  drivers/media/platform/cadence/cdns-csi2rx.c  |  107 +-
>  drivers/media/platform/starfive/Kconfig       |   18 +
>  drivers/media/platform/starfive/Makefile      |   14 +
>  drivers/media/platform/starfive/stf_camss.c   |  477 +++++++
>  drivers/media/platform/starfive/stf_camss.h   |  150 +++
>  drivers/media/platform/starfive/stf_common.h  |   18 +
>  drivers/media/platform/starfive/stf_isp.c     |  737 +++++++++++
>  drivers/media/platform/starfive/stf_isp.h     |  999 +++++++++++++++
>  .../media/platform/starfive/stf_isp_hw_ops.c  |  715 +++++++++++
>  drivers/media/platform/starfive/stf_video.c   |  989 ++++++++++++++
>  drivers/media/platform/starfive/stf_video.h   |   89 ++
>  drivers/media/platform/starfive/stf_vin.c     | 1138 +++++++++++++++++
>  drivers/media/platform/starfive/stf_vin.h     |  174 +++
>  .../media/platform/starfive/stf_vin_hw_ops.c  |  211 +++
>  23 files changed, 6272 insertions(+), 115 deletions(-)
>  create mode 100644 Documentation/admin-guide/media/starfive_camss.rst
>  create mode 100644 Documentation/admin-guide/media/starfive_camss_graph.dot
>  delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
>  create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>  create mode 100644 drivers/media/platform/starfive/Kconfig
>  create mode 100644 drivers/media/platform/starfive/Makefile
>  create mode 100644 drivers/media/platform/starfive/stf_camss.c
>  create mode 100644 drivers/media/platform/starfive/stf_camss.h
>  create mode 100644 drivers/media/platform/starfive/stf_common.h
>  create mode 100644 drivers/media/platform/starfive/stf_isp.c
>  create mode 100644 drivers/media/platform/starfive/stf_isp.h
>  create mode 100644 drivers/media/platform/starfive/stf_isp_hw_ops.c
>  create mode 100644 drivers/media/platform/starfive/stf_video.c
>  create mode 100644 drivers/media/platform/starfive/stf_video.h
>  create mode 100644 drivers/media/platform/starfive/stf_vin.c
>  create mode 100644 drivers/media/platform/starfive/stf_vin.h
>  create mode 100644 drivers/media/platform/starfive/stf_vin_hw_ops.c
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ