| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230424120217.GA5444@pendragon.ideasonboard.com>
Date: Mon, 24 Apr 2023 15:02:17 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Jack Zhu <jack.zhu@...rfivetech.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Todor Tomov <todor.too@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Eugen Hristev <eugen.hristev@...labora.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, changhuang.liang@...rfivetech.com
Subject: Re: [PATCH v4 6/8] media: dt-bindings: Add bindings for JH7110
Camera Subsystem
Hi Jack,
On Thu, Apr 20, 2023 at 04:51:39PM +0800, Jack Zhu wrote:
> On 2023/4/19 14:15, Laurent Pinchart wrote:
> > On Thu, Apr 13, 2023 at 11:55:39AM +0800, Jack Zhu wrote:
> >> Add the bindings documentation for Starfive JH7110 Camera Subsystem
> >> which is used for handing image sensor data.
> >>
> >> Signed-off-by: Jack Zhu <jack.zhu@...rfivetech.com>
> >> ---
> >> .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++
> >> MAINTAINERS | 7 +
> >> 2 files changed, 171 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> >> new file mode 100644
> >> index 000000000000..4cd144f1b845
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> >> @@ -0,0 +1,164 @@
> >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> >> +
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Starfive SoC CAMSS ISP
> >> +
> >> +maintainers:
> >> + - Jack Zhu <jack.zhu@...rfivetech.com>
> >> + - Changhuang Liang <changhuang.liang@...rfivetech.com>
> >> +
> >> +description:
> >> + The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
> >> + consists of a VIN controller (Video In Controller, a top-level control until)
> >> + and an ISP.
> >> +
> >> +properties:
> >> + compatible:
> >> + const: starfive,jh7110-camss
> >> +
> >> + reg:
> >> + maxItems: 2
> >> +
> >> + reg-names:
> >> + items:
> >> + - const: syscon
> >> + - const: isp
> >> +
> >> + clocks:
> >> + maxItems: 7
> >> +
> >> + clock-names:
> >> + items:
> >> + - const: apb_func
> >> + - const: wrapper_clk_c
> >> + - const: dvp_inv
> >> + - const: axiwr
> >> + - const: mipi_rx0_pxl
> >> + - const: ispcore_2x
> >> + - const: isp_axi
> >> +
> >> + resets:
> >> + maxItems: 6
> >> +
> >> + reset-names:
> >> + items:
> >> + - const: wrapper_p
> >> + - const: wrapper_c
> >> + - const: axird
> >> + - const: axiwr
> >> + - const: isp_top_n
> >> + - const: isp_top_axi
> >> +
> >> + power-domains:
> >> + items:
> >> + - description: JH7110 ISP Power Domain Switch Controller.
> >> +
> >> + interrupts:
> >> + maxItems: 4
> >> +
> >> + ports:
> >> + $ref: /schemas/graph.yaml#/properties/ports
> >> +
> >> + properties:
> >> + port@0:
> >> + $ref: /schemas/graph.yaml#/$defs/port-base
> >> + unevaluatedProperties: false
> >> + description: Input port for receiving DVP data.
> >> +
> >> + properties:
> >> + endpoint:
> >> + $ref: video-interfaces.yaml#
> >> + unevaluatedProperties: false
> >> +
> >> + properties:
> >> + bus-width:
> >> + const: 8
> >> +
> >> + data-shift:
> >> + const: 2
> >
> > As far as I can tell, those two properties are not handled by the
> > driver. I assume this is because the driver doesn't support the DVP
> > input yet. That's fine, but it makes it a bit hard to review the device
> > tree. Could you provide some information about the DVP hardware
> > interface ? Does it support both BT.656 and sync signals, or just sync
> > signals ? Are the polarities of the clock and h/v sync controllable ?
> > Is the parallel input bus 8-bit wide or are other options supported ?
> > And finally, what are you modelling with data-shift: 2 ?
>
> Hello Laurent,
>
> The DVP hardware supports BT.656 and sync signals, can control the
> polarities of h/v sync, supports 8/10/12 bit wide, and data-shift: 2 is
> line 9-2.
Thank you for the information. Endpoints for port@0 should then require
bus-type. The hsync-active and vsync-active should be listed with
default values and be optional. bus-width should have 8, 10 and 12 as
supported values, and be required, or have a default (I think making it
required is best). data-shift should list supported values too,
including 0, and be optional with a default of 0.
> >> +
> >> + port@1:
> >> + $ref: /schemas/graph.yaml#/properties/port
> >> + description: Input port for receiving CSI data.
> >> +
> >> + required:
> >> + - port@0
> >> + - port@1
> >> +
> >> +required:
> >> + - compatible
> >> + - reg
> >> + - reg-names
> >> + - clocks
> >> + - clock-names
> >> + - resets
> >> + - reset-names
> >> + - power-domains
> >> + - interrupts
> >> + - ports
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> + - |
> >> + isp@...40000 {
> >> + compatible = "starfive,jh7110-camss";
> >> + reg = <0x19840000 0x10000>,
> >> + <0x19870000 0x30000>;
> >> + reg-names = "syscon", "isp";
> >> + clocks = <&ispcrg 0>,
> >> + <&ispcrg 13>,
> >> + <&ispcrg 2>,
> >> + <&ispcrg 12>,
> >> + <&ispcrg 1>,
> >> + <&syscrg 51>,
> >> + <&syscrg 52>;
> >> + clock-names = "apb_func",
> >> + "wrapper_clk_c",
> >> + "dvp_inv",
> >> + "axiwr",
> >> + "mipi_rx0_pxl",
> >> + "ispcore_2x",
> >> + "isp_axi";
> >> + resets = <&ispcrg 0>,
> >> + <&ispcrg 1>,
> >> + <&ispcrg 10>,
> >> + <&ispcrg 11>,
> >> + <&syscrg 41>,
> >> + <&syscrg 42>;
> >> + reset-names = "wrapper_p",
> >> + "wrapper_c",
> >> + "axird",
> >> + "axiwr",
> >> + "isp_top_n",
> >> + "isp_top_axi";
> >> + power-domains = <&pwrc 5>;
> >> + interrupts = <92>, <87>, <88>, <90>;
> >> +
> >> + ports {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + port@0 {
> >> + reg = <0>;
> >> + vin_from_sc2235: endpoint {
> >> + remote-endpoint = <&sc2235_to_vin>;
> >> + bus-width = <8>;
> >> + data-shift = <2>;
> >> + hsync-active = <1>;
> >> + vsync-active = <0>;
> >> + pclk-sample = <1>;
> >> + };
> >> + };
> >> +
> >> + port@1 {
> >> + reg = <1>;
> >> + vin_from_csi2rx: endpoint {
> >> + remote-endpoint = <&csi2rx_to_vin>;
> >> + };
> >> + };
> >> + };
> >> + };
> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> index bbb8b5c0187b..b8c76b0d7eb3 100644
> >> --- a/MAINTAINERS
> >> +++ b/MAINTAINERS
> >> @@ -19909,6 +19909,13 @@ M: Ion Badulescu <ionut@...ula.org>
> >> S: Odd Fixes
> >> F: drivers/net/ethernet/adaptec/starfire*
> >>
> >> +STARFIVE CAMERA SUBSYSTEM DRIVER
> >> +M: Jack Zhu <jack.zhu@...rfivetech.com>
> >> +M: Changhuang Liang <changhuang.liang@...rfivetech.com>
> >> +L: linux-media@...r.kernel.org
> >> +S: Maintained
> >> +F: Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> >> +
> >> STARFIVE DEVICETREES
> >> M: Emil Renner Berthing <kernel@...il.dk>
> >> S: Maintained
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists