| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 25 Apr 2023 14:34:48 +0800
From: Jack Zhu <jack.zhu@...rfivetech.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
CC: Mauro Carvalho Chehab <mchehab@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Robert Foss <rfoss@...nel.org>,
"Todor Tomov" <todor.too@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
"Ezequiel Garcia" <ezequiel@...guardiasur.com.ar>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Eugen Hristev <eugen.hristev@...labora.com>,
<linux-media@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <changhuang.liang@...rfivetech.com>
Subject: Re: [PATCH v4 6/8] media: dt-bindings: Add bindings for JH7110 Camera
Subsystem
Hello Laurent,
On 2023/4/24 20:02, Laurent Pinchart wrote:
> Hi Jack,
>
> On Thu, Apr 20, 2023 at 04:51:39PM +0800, Jack Zhu wrote:
>> On 2023/4/19 14:15, Laurent Pinchart wrote:
>> > On Thu, Apr 13, 2023 at 11:55:39AM +0800, Jack Zhu wrote:
>> >> Add the bindings documentation for Starfive JH7110 Camera Subsystem
>> >> which is used for handing image sensor data.
>> >>
>> >> Signed-off-by: Jack Zhu <jack.zhu@...rfivetech.com>
>> >> ---
>> >> .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++
>> >> MAINTAINERS | 7 +
>> >> 2 files changed, 171 insertions(+)
>> >> create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> >> new file mode 100644
>> >> index 000000000000..4cd144f1b845
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> >> @@ -0,0 +1,164 @@
>> >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> >> +
>> >> +%YAML 1.2
>> >> +---
>> >> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
>> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> >> +
>> >> +title: Starfive SoC CAMSS ISP
>> >> +
>> >> +maintainers:
>> >> + - Jack Zhu <jack.zhu@...rfivetech.com>
>> >> + - Changhuang Liang <changhuang.liang@...rfivetech.com>
>> >> +
>> >> +description:
>> >> + The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
>> >> + consists of a VIN controller (Video In Controller, a top-level control until)
>> >> + and an ISP.
>> >> +
>> >> +properties:
>> >> + compatible:
>> >> + const: starfive,jh7110-camss
>> >> +
>> >> + reg:
>> >> + maxItems: 2
>> >> +
>> >> + reg-names:
>> >> + items:
>> >> + - const: syscon
>> >> + - const: isp
>> >> +
>> >> + clocks:
>> >> + maxItems: 7
>> >> +
>> >> + clock-names:
>> >> + items:
>> >> + - const: apb_func
>> >> + - const: wrapper_clk_c
>> >> + - const: dvp_inv
>> >> + - const: axiwr
>> >> + - const: mipi_rx0_pxl
>> >> + - const: ispcore_2x
>> >> + - const: isp_axi
>> >> +
>> >> + resets:
>> >> + maxItems: 6
>> >> +
>> >> + reset-names:
>> >> + items:
>> >> + - const: wrapper_p
>> >> + - const: wrapper_c
>> >> + - const: axird
>> >> + - const: axiwr
>> >> + - const: isp_top_n
>> >> + - const: isp_top_axi
>> >> +
>> >> + power-domains:
>> >> + items:
>> >> + - description: JH7110 ISP Power Domain Switch Controller.
>> >> +
>> >> + interrupts:
>> >> + maxItems: 4
>> >> +
>> >> + ports:
>> >> + $ref: /schemas/graph.yaml#/properties/ports
>> >> +
>> >> + properties:
>> >> + port@0:
>> >> + $ref: /schemas/graph.yaml#/$defs/port-base
>> >> + unevaluatedProperties: false
>> >> + description: Input port for receiving DVP data.
>> >> +
>> >> + properties:
>> >> + endpoint:
>> >> + $ref: video-interfaces.yaml#
>> >> + unevaluatedProperties: false
>> >> +
>> >> + properties:
>> >> + bus-width:
>> >> + const: 8
>> >> +
>> >> + data-shift:
>> >> + const: 2
>> >
>> > As far as I can tell, those two properties are not handled by the
>> > driver. I assume this is because the driver doesn't support the DVP
>> > input yet. That's fine, but it makes it a bit hard to review the device
>> > tree. Could you provide some information about the DVP hardware
>> > interface ? Does it support both BT.656 and sync signals, or just sync
>> > signals ? Are the polarities of the clock and h/v sync controllable ?
>> > Is the parallel input bus 8-bit wide or are other options supported ?
>> > And finally, what are you modelling with data-shift: 2 ?
>>
>> Hello Laurent,
>>
>> The DVP hardware supports BT.656 and sync signals, can control the
>> polarities of h/v sync, supports 8/10/12 bit wide, and data-shift: 2 is
>> line 9-2.
>
> Thank you for the information. Endpoints for port@0 should then require
> bus-type. The hsync-active and vsync-active should be listed with
> default values and be optional. bus-width should have 8, 10 and 12 as
> supported values, and be required, or have a default (I think making it
> required is best). data-shift should list supported values too,
> including 0, and be optional with a default of 0.
>
Thank you for your suggestion. I will make the following modifications:
properties:
bus-type:
enum: [5, 6]
bus-width:
enum: [8, 10, 12]
data-shift:
enum: [0, 2]
default: 0
hsync-active:
enum: [0, 1]
default: 1
vsync-active:
enum: [0, 1]
default: 1
required:
- bus-type
- bus-width
>> >> +
>> >> + port@1:
>> >> + $ref: /schemas/graph.yaml#/properties/port
>> >> + description: Input port for receiving CSI data.
>> >> +
>> >> + required:
>> >> + - port@0
>> >> + - port@1
>> >> +
>> >> +required:
>> >> + - compatible
>> >> + - reg
>> >> + - reg-names
>> >> + - clocks
>> >> + - clock-names
>> >> + - resets
>> >> + - reset-names
>> >> + - power-domains
>> >> + - interrupts
>> >> + - ports
>> >> +
>> >> +additionalProperties: false
>> >> +
>> >> +examples:
>> >> + - |
>> >> + isp@...40000 {
>> >> + compatible = "starfive,jh7110-camss";
>> >> + reg = <0x19840000 0x10000>,
>> >> + <0x19870000 0x30000>;
>> >> + reg-names = "syscon", "isp";
>> >> + clocks = <&ispcrg 0>,
>> >> + <&ispcrg 13>,
>> >> + <&ispcrg 2>,
>> >> + <&ispcrg 12>,
>> >> + <&ispcrg 1>,
>> >> + <&syscrg 51>,
>> >> + <&syscrg 52>;
>> >> + clock-names = "apb_func",
>> >> + "wrapper_clk_c",
>> >> + "dvp_inv",
>> >> + "axiwr",
>> >> + "mipi_rx0_pxl",
>> >> + "ispcore_2x",
>> >> + "isp_axi";
>> >> + resets = <&ispcrg 0>,
>> >> + <&ispcrg 1>,
>> >> + <&ispcrg 10>,
>> >> + <&ispcrg 11>,
>> >> + <&syscrg 41>,
>> >> + <&syscrg 42>;
>> >> + reset-names = "wrapper_p",
>> >> + "wrapper_c",
>> >> + "axird",
>> >> + "axiwr",
>> >> + "isp_top_n",
>> >> + "isp_top_axi";
>> >> + power-domains = <&pwrc 5>;
>> >> + interrupts = <92>, <87>, <88>, <90>;
>> >> +
>> >> + ports {
>> >> + #address-cells = <1>;
>> >> + #size-cells = <0>;
>> >> + port@0 {
>> >> + reg = <0>;
>> >> + vin_from_sc2235: endpoint {
>> >> + remote-endpoint = <&sc2235_to_vin>;
>> >> + bus-width = <8>;
>> >> + data-shift = <2>;
>> >> + hsync-active = <1>;
>> >> + vsync-active = <0>;
>> >> + pclk-sample = <1>;
>> >> + };
>> >> + };
>> >> +
>> >> + port@1 {
>> >> + reg = <1>;
>> >> + vin_from_csi2rx: endpoint {
>> >> + remote-endpoint = <&csi2rx_to_vin>;
>> >> + };
>> >> + };
>> >> + };
>> >> + };
>> >> diff --git a/MAINTAINERS b/MAINTAINERS
>> >> index bbb8b5c0187b..b8c76b0d7eb3 100644
>> >> --- a/MAINTAINERS
>> >> +++ b/MAINTAINERS
>> >> @@ -19909,6 +19909,13 @@ M: Ion Badulescu <ionut@...ula.org>
>> >> S: Odd Fixes
>> >> F: drivers/net/ethernet/adaptec/starfire*
>> >>
>> >> +STARFIVE CAMERA SUBSYSTEM DRIVER
>> >> +M: Jack Zhu <jack.zhu@...rfivetech.com>
>> >> +M: Changhuang Liang <changhuang.liang@...rfivetech.com>
>> >> +L: linux-media@...r.kernel.org
>> >> +S: Maintained
>> >> +F: Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> >> +
>> >> STARFIVE DEVICETREES
>> >> M: Emil Renner Berthing <kernel@...il.dk>
>> >> S: Maintained
>
Powered by blists - more mailing lists