| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <17afcef9-39ff-ef25-6c24-38726b30cf90@linux.intel.com>
Date: Tue, 25 Apr 2023 13:57:05 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Jacky Huang <ychuang570808@...il.com>
cc: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
lee@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
p.zabel@...gutronix.de,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>, tmaimon77@...il.com,
catalin.marinas@....com, will@...nel.org,
devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-serial <linux-serial@...r.kernel.org>, arnd@...db.de,
schung@...oton.com, mjchen@...oton.com,
Jacky Huang <ychuang3@...oton.com>
Subject: Re: [PATCH v8 09/11] reset: Add Nuvoton ma35d1 reset driver
support
On Tue, 25 Apr 2023, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@...oton.com>
>
> This driver supports individual IP reset for ma35d1. The reset
> control registers is a subset of system control registers.
>
> Signed-off-by: Jacky Huang <ychuang3@...oton.com>
> ---
> drivers/reset/Kconfig | 6 +
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-ma35d1.c | 229 +++++++++++++++++++++++++++++++++++
> 3 files changed, 236 insertions(+)
> create mode 100644 drivers/reset/reset-ma35d1.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 2a52c990d4fe..58477c6ca9b8 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -143,6 +143,12 @@ config RESET_NPCM
> This enables the reset controller driver for Nuvoton NPCM
> BMC SoCs.
>
> +config RESET_NUVOTON_MA35D1
> + bool "Nuvton MA35D1 Reset Driver"
> + default ARCH_NUVOTON || COMPILE_TEST
> + help
> + This enables the reset controller driver for Nuvoton MA35D1 SoC.
> +
> config RESET_OXNAS
> bool
>
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 3e7e5fd633a8..fd52dcf66a99 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
> obj-$(CONFIG_RESET_MESON) += reset-meson.o
> obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
> obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
> +obj-$(CONFIG_RESET_NUVOTON_MA35D1) += reset-ma35d1.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> obj-$(CONFIG_RESET_POLARFIRE_SOC) += reset-mpfs.o
> diff --git a/drivers/reset/reset-ma35d1.c b/drivers/reset/reset-ma35d1.c
> new file mode 100644
> index 000000000000..648b380becf7
> --- /dev/null
> +++ b/drivers/reset/reset-ma35d1.c
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023 Nuvoton Technology Corp.
> + * Author: Chi-Fang Li <cfli0@...oton.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/reset-controller.h>
> +#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
> +
> +struct ma35d1_reset_data {
> + struct reset_controller_dev rcdev;
> + struct notifier_block restart_handler;
> + void __iomem *base;
> +};
> +
> +static const struct {
> + u32 reg_ofs;
> + u32 bit;
> +} ma35d1_reset_map[] = {
> + [MA35D1_RESET_CHIP] = {0x20, 0},
> + [MA35D1_RESET_CA35CR0] = {0x20, 1},
> + [MA35D1_RESET_CA35CR1] = {0x20, 2},
> + [MA35D1_RESET_CM4] = {0x20, 3},
> + [MA35D1_RESET_PDMA0] = {0x20, 4},
> + [MA35D1_RESET_PDMA1] = {0x20, 5},
> + [MA35D1_RESET_PDMA2] = {0x20, 6},
> + [MA35D1_RESET_PDMA3] = {0x20, 7},
> + [MA35D1_RESET_DISP] = {0x20, 9},
> + [MA35D1_RESET_VCAP0] = {0x20, 10},
> + [MA35D1_RESET_VCAP1] = {0x20, 11},
> + [MA35D1_RESET_GFX] = {0x20, 12},
> + [MA35D1_RESET_VDEC] = {0x20, 13},
> + [MA35D1_RESET_WHC0] = {0x20, 14},
> + [MA35D1_RESET_WHC1] = {0x20, 15},
> + [MA35D1_RESET_GMAC0] = {0x20, 16},
> + [MA35D1_RESET_GMAC1] = {0x20, 17},
> + [MA35D1_RESET_HWSEM] = {0x20, 18},
> + [MA35D1_RESET_EBI] = {0x20, 19},
> + [MA35D1_RESET_HSUSBH0] = {0x20, 20},
> + [MA35D1_RESET_HSUSBH1] = {0x20, 21},
> + [MA35D1_RESET_HSUSBD] = {0x20, 22},
> + [MA35D1_RESET_USBHL] = {0x20, 23},
> + [MA35D1_RESET_SDH0] = {0x20, 24},
> + [MA35D1_RESET_SDH1] = {0x20, 25},
> + [MA35D1_RESET_NAND] = {0x20, 26},
> + [MA35D1_RESET_GPIO] = {0x20, 27},
> + [MA35D1_RESET_MCTLP] = {0x20, 28},
> + [MA35D1_RESET_MCTLC] = {0x20, 29},
> + [MA35D1_RESET_DDRPUB] = {0x20, 30},
> + [MA35D1_RESET_TMR0] = {0x24, 2},
> + [MA35D1_RESET_TMR1] = {0x24, 3},
> + [MA35D1_RESET_TMR2] = {0x24, 4},
> + [MA35D1_RESET_TMR3] = {0x24, 5},
> + [MA35D1_RESET_I2C0] = {0x24, 8},
> + [MA35D1_RESET_I2C1] = {0x24, 9},
> + [MA35D1_RESET_I2C2] = {0x24, 10},
> + [MA35D1_RESET_I2C3] = {0x24, 11},
> + [MA35D1_RESET_QSPI0] = {0x24, 12},
> + [MA35D1_RESET_SPI0] = {0x24, 13},
> + [MA35D1_RESET_SPI1] = {0x24, 14},
> + [MA35D1_RESET_SPI2] = {0x24, 15},
> + [MA35D1_RESET_UART0] = {0x24, 16},
> + [MA35D1_RESET_UART1] = {0x24, 17},
> + [MA35D1_RESET_UART2] = {0x24, 18},
> + [MA35D1_RESET_UART3] = {0x24, 19},
> + [MA35D1_RESET_UART4] = {0x24, 20},
> + [MA35D1_RESET_UART5] = {0x24, 21},
> + [MA35D1_RESET_UART6] = {0x24, 22},
> + [MA35D1_RESET_UART7] = {0x24, 23},
> + [MA35D1_RESET_CANFD0] = {0x24, 24},
> + [MA35D1_RESET_CANFD1] = {0x24, 25},
> + [MA35D1_RESET_EADC0] = {0x24, 28},
> + [MA35D1_RESET_I2S0] = {0x24, 29},
> + [MA35D1_RESET_SC0] = {0x28, 0},
> + [MA35D1_RESET_SC1] = {0x28, 1},
> + [MA35D1_RESET_QSPI1] = {0x28, 4},
> + [MA35D1_RESET_SPI3] = {0x28, 6},
> + [MA35D1_RESET_EPWM0] = {0x28, 16},
> + [MA35D1_RESET_EPWM1] = {0x28, 17},
> + [MA35D1_RESET_QEI0] = {0x28, 22},
> + [MA35D1_RESET_QEI1] = {0x28, 23},
> + [MA35D1_RESET_ECAP0] = {0x28, 26},
> + [MA35D1_RESET_ECAP1] = {0x28, 27},
> + [MA35D1_RESET_CANFD2] = {0x28, 28},
> + [MA35D1_RESET_ADC0] = {0x28, 31},
> + [MA35D1_RESET_TMR4] = {0x2C, 0},
> + [MA35D1_RESET_TMR5] = {0x2C, 1},
> + [MA35D1_RESET_TMR6] = {0x2C, 2},
> + [MA35D1_RESET_TMR7] = {0x2C, 3},
> + [MA35D1_RESET_TMR8] = {0x2C, 4},
> + [MA35D1_RESET_TMR9] = {0x2C, 5},
> + [MA35D1_RESET_TMR10] = {0x2C, 6},
> + [MA35D1_RESET_TMR11] = {0x2C, 7},
> + [MA35D1_RESET_UART8] = {0x2C, 8},
> + [MA35D1_RESET_UART9] = {0x2C, 9},
> + [MA35D1_RESET_UART10] = {0x2C, 10},
> + [MA35D1_RESET_UART11] = {0x2C, 11},
> + [MA35D1_RESET_UART12] = {0x2C, 12},
> + [MA35D1_RESET_UART13] = {0x2C, 13},
> + [MA35D1_RESET_UART14] = {0x2C, 14},
> + [MA35D1_RESET_UART15] = {0x2C, 15},
> + [MA35D1_RESET_UART16] = {0x2C, 16},
> + [MA35D1_RESET_I2S1] = {0x2C, 17},
> + [MA35D1_RESET_I2C4] = {0x2C, 18},
> + [MA35D1_RESET_I2C5] = {0x2C, 19},
> + [MA35D1_RESET_EPWM2] = {0x2C, 20},
> + [MA35D1_RESET_ECAP2] = {0x2C, 21},
> + [MA35D1_RESET_QEI2] = {0x2C, 22},
> + [MA35D1_RESET_CANFD3] = {0x2C, 23},
> + [MA35D1_RESET_KPI] = {0x2C, 24},
> + [MA35D1_RESET_GIC] = {0x2C, 28},
> + [MA35D1_RESET_SSMCC] = {0x2C, 30},
> + [MA35D1_RESET_SSPCC] = {0x2C, 31}
> +};
> +
> +static int ma35d1_restart_handler(struct notifier_block *this,
> + unsigned long mode, void *cmd)
> +{
> + u32 id = MA35D1_RESET_CHIP;
> + struct ma35d1_reset_data *data = container_of(this,
> + struct ma35d1_reset_data,
> + restart_handler);
Reverse xmas tree order.
Try to fit declarations with container_of() to single line, if they fit <=
100 chars, avoid the line splits.
Missing #include for container_of().
> +
> + writel_relaxed(BIT(ma35d1_reset_map[id].bit),
Missing #include for BIT().
> + data->base + ma35d1_reset_map[id].reg_ofs);
> + return 0;
> +}
> +
> +static int ma35d1_reset_update(struct reset_controller_dev *rcdev,
> + unsigned long id, bool assert)
> +{
> + u32 reg;
> + struct ma35d1_reset_data *data = container_of(rcdev,
> + struct ma35d1_reset_data,
> + rcdev);
Reverse xmas tree.
Add an array size trap to detect potential id bugs:
if (WARN_ON_ONCE(id >= ARRAY_SIZE(ma35d1_reset_map)))
return -EINVAL;
> + reg = readl_relaxed(data->base + ma35d1_reset_map[id].reg_ofs);
> + if (assert)
> + reg |= BIT(ma35d1_reset_map[id].bit);
> + else
> + reg &= ~(BIT(ma35d1_reset_map[id].bit));
> + writel_relaxed(reg, data->base + ma35d1_reset_map[id].reg_ofs);
> +
> + return 0;
> +}
> +
> +static int ma35d1_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return ma35d1_reset_update(rcdev, id, true);
> +}
> +
> +static int ma35d1_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return ma35d1_reset_update(rcdev, id, false);
> +}
> +
> +static int ma35d1_reset_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + u32 reg;
> + struct ma35d1_reset_data *data = container_of(rcdev,
> + struct ma35d1_reset_data,
> + rcdev);
Reverse xmas tree.
Add ARRAY_SIZE trap here too.
> + reg = readl_relaxed(data->base + ma35d1_reset_map[id].reg_ofs);
> + return !!(reg & BIT(ma35d1_reset_map[id].bit));
> +}
> +
> +static const struct reset_control_ops ma35d1_reset_ops = {
> + .assert = ma35d1_reset_assert,
> + .deassert = ma35d1_reset_deassert,
> + .status = ma35d1_reset_status,
> +};
> +
> +static const struct of_device_id ma35d1_reset_dt_ids[] = {
> + { .compatible = "nuvoton,ma35d1-reset" },
> + { },
> +};
> +
> +static int ma35d1_reset_probe(struct platform_device *pdev)
> +{
> + int err;
> + struct device *dev = &pdev->dev;
> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + struct ma35d1_reset_data *reset_data;
Reverse xmas tree order.
> +
> + if (!pdev->dev.of_node) {
> + dev_err(&pdev->dev, "Device tree node not found\n");
> + return -EINVAL;
> + }
> +
> + reset_data = devm_kzalloc(dev, sizeof(*reset_data), GFP_KERNEL);
> + if (!reset_data)
> + return -ENOMEM;
> +
> + reset_data->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(reset_data->base))
Missing include for IS_ERR()
> + return PTR_ERR(reset_data->base);
> +
> + reset_data->rcdev.owner = THIS_MODULE;
> + reset_data->rcdev.nr_resets = MA35D1_RESET_COUNT;
> + reset_data->rcdev.ops = &ma35d1_reset_ops;
> + reset_data->rcdev.of_node = dev->of_node;
> + reset_data->restart_handler.notifier_call = ma35d1_restart_handler;
> + reset_data->restart_handler.priority = 192;
> +
> + err = register_restart_handler(&reset_data->restart_handler);
> + if (err)
> + dev_warn(&pdev->dev, "failed to register restart handler\n");
> +
> + return devm_reset_controller_register(dev, &reset_data->rcdev);
> +}
> +
> +static struct platform_driver ma35d1_reset_driver = {
> + .probe = ma35d1_reset_probe,
> + .driver = {
> + .name = "ma35d1-reset",
> + .of_match_table = ma35d1_reset_dt_ids,
> + },
> +};
> +
> +builtin_platform_driver(ma35d1_reset_driver);
>
--
i.
Powered by blists - more mailing lists