[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230426074345.750135-11-saikrishnag@marvell.com>
Date: Wed, 26 Apr 2023 13:13:45 +0530
From: Sai Krishna <saikrishnag@...vell.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <simon.horman@...igine.com>,
<leon@...nel.org>, <sgoutham@...vell.com>, <gakula@...vell.com>,
<lcherian@...vell.com>, <jerinj@...vell.com>, <hkelam@...vell.com>,
<sbhatta@...vell.com>
CC: Sai Krishna <saikrishnag@...vell.com>
Subject: [net PATCH v4 10/10] octeontx2-pf: Disable packet I/O for graceful exit
From: Subbaraya Sundeep <sbhatta@...vell.com>
At the stage of enabling packet I/O in otx2_open, If mailbox
timeout occurs then interface ends up in down state where as
hardware packet I/O is enabled. Hence disable packet I/O also
before bailing out.
As per earlier implementation, when the VF device probe fails due
to error in MSIX vector allocation, the LF resources, NIX and NPA
LF were not detached. This patch fixes in releasing these
resources, when ever this MSIX vector allocation/VF probe fails.
Fixes: 1ea0166da050 ("octeontx2-pf: Fix the device state on error")
Signed-off-by: Subbaraya Sundeep <sbhatta@...vell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@...vell.com>
Signed-off-by: Sai Krishna <saikrishnag@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 11 ++++++++++-
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 2 +-
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 179433d0a54a..52a57d2493dc 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1835,13 +1835,22 @@ int otx2_open(struct net_device *netdev)
otx2_dmacflt_reinstall_flows(pf);
err = otx2_rxtx_enable(pf, true);
- if (err)
+ /* If a mbox communication error happens at this point then interface
+ * will end up in a state such that it is in down state but hardware
+ * mcam entries are enabled to receive the packets. Hence disable the
+ * packet I/O.
+ */
+ if (err == EIO)
+ goto err_disable_rxtx;
+ else if (err)
goto err_tx_stop_queues;
otx2_do_set_rx_mode(pf);
return 0;
+err_disable_rxtx:
+ otx2_rxtx_enable(pf, false);
err_tx_stop_queues:
netif_tx_stop_all_queues(netdev);
netif_carrier_off(netdev);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index ab126f8706c7..53366dbfbf27 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -621,7 +621,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err = otx2vf_realloc_msix_vectors(vf);
if (err)
- goto err_mbox_destroy;
+ goto err_detach_rsrc;
err = otx2_set_real_num_queues(netdev, qcount, qcount);
if (err)
--
2.25.1
Powered by blists - more mailing lists