[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230504-b4-v6-3-topic-boards-imx8mp-evk-dual-role-usb-v2-3-3889b1b2050c@pengutronix.de>
Date: Thu, 04 May 2023 15:46:52 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: andreas@...al.se, jun.li@....com,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Guenter Roeck <linux@...ck-us.net>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>
Cc: linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Marco Felsch <m.felsch@...gutronix.de>
Subject: [PATCH v2 3/4] usb: typec: tcpci: clear the fault status bit
According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reseted to
their default values.
This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq. Fix this gernally by writing a one to the correspondig
bit-7.
Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
---
drivers/usb/typec/tcpm/tcpci.c | 5 +++++
include/linux/usb/tcpci.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 8da23240afbe..15632d023e4c 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -602,6 +602,11 @@ static int tcpci_init(struct tcpc_dev *tcpc)
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
+ regmap_read(tcpci->regmap, TCPC_FAULT_STATUS, ®);
+ if (reg & TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT)
+ tcpci_write16(tcpci, TCPC_FAULT_STATUS,
+ TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+
/* Handle vendor init */
if (tcpci->data->init) {
ret = tcpci->data->init(tcpci, tcpci->data);
diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
index 85e95a3251d3..83376473ac76 100644
--- a/include/linux/usb/tcpci.h
+++ b/include/linux/usb/tcpci.h
@@ -103,6 +103,7 @@
#define TCPC_POWER_STATUS_SINKING_VBUS BIT(0)
#define TCPC_FAULT_STATUS 0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
#define TCPC_ALERT_EXTENDED 0x21
--
2.39.2
Powered by blists - more mailing lists