[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230504-b4-v6-3-topic-boards-imx8mp-evk-dual-role-usb-v2-2-3889b1b2050c@pengutronix.de>
Date: Thu, 04 May 2023 15:46:51 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: andreas@...al.se, jun.li@....com,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Guenter Roeck <linux@...ck-us.net>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>
Cc: linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Marco Felsch <m.felsch@...gutronix.de>
Subject: [PATCH v2 2/4] usb: typec: mux: gpio-sbu-mux: add support for ss
data lane muxing
The commit adds the support to handle gpio based usb-c ss data lanes
muxes as well. The only difference is the data lanes enable handling.
The data lanes don't depend on the alt-mode settings instead they depend
on the usb-c cable orientation (connected, not connected).
Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
---
drivers/usb/typec/mux/Kconfig | 5 +++--
drivers/usb/typec/mux/gpio-sbu-mux.c | 18 +++++++++++++++++-
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index c46fa4f9d3df..68438e7722d0 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -13,10 +13,11 @@ config TYPEC_MUX_FSA4480
If compiled as a module, the module will be named fsa4480.
config TYPEC_MUX_GPIO_SBU
- tristate "Generic GPIO based SBU mux for USB Type-C applications"
+ tristate "Generic GPIO based SS/SBU mux for USB Type-C applications"
help
Say Y or M if your system uses a GPIO based mux for managing the
- connected state and the swapping of the SBU lines in a Type-C port.
+ connected state and the swapping of the SS or SBU lines in a Type-C
+ port.
config TYPEC_MUX_PI3USB30532
tristate "Pericom PI3USB30532 Type-C cross switch driver"
diff --git a/drivers/usb/typec/mux/gpio-sbu-mux.c b/drivers/usb/typec/mux/gpio-sbu-mux.c
index f62516dafe8f..a1a560a085b8 100644
--- a/drivers/usb/typec/mux/gpio-sbu-mux.c
+++ b/drivers/usb/typec/mux/gpio-sbu-mux.c
@@ -14,12 +14,18 @@
#include <linux/usb/typec_dp.h>
#include <linux/usb/typec_mux.h>
+enum gpio_sbu_mux_type {
+ MUX_TYPE_SBU,
+ MUX_TYPE_SS,
+};
+
struct gpio_sbu_mux {
struct gpio_desc *enable_gpio;
struct gpio_desc *select_gpio;
struct typec_switch_dev *sw;
struct typec_mux_dev *mux;
+ enum gpio_sbu_mux_type type;
struct mutex lock; /* protect enabled and swapped */
bool enabled;
@@ -38,6 +44,13 @@ static int gpio_sbu_switch_set(struct typec_switch_dev *sw,
enabled = sbu_mux->enabled;
swapped = sbu_mux->swapped;
+ /*
+ * In case of muxing the SS data lanes the enable status depends only on
+ * the orientation and not on the TYPEC_DP_STATE_*
+ */
+ if (sbu_mux->type == MUX_TYPE_SS)
+ enabled = true;
+
switch (orientation) {
case TYPEC_ORIENTATION_NONE:
enabled = false;
@@ -103,6 +116,8 @@ static int gpio_sbu_mux_probe(struct platform_device *pdev)
if (!sbu_mux)
return -ENOMEM;
+ sbu_mux->type = (enum gpio_sbu_mux_type)device_get_match_data(&pdev->dev);
+
mutex_init(&sbu_mux->lock);
sbu_mux->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
@@ -153,7 +168,8 @@ static int gpio_sbu_mux_remove(struct platform_device *pdev)
}
static const struct of_device_id gpio_sbu_mux_match[] = {
- { .compatible = "gpio-sbu-mux", },
+ { .compatible = "gpio-sbu-mux", .data = (void *)MUX_TYPE_SBU },
+ { .compatible = "gpio-ss-mux", .data = (void *)MUX_TYPE_SS },
{}
};
MODULE_DEVICE_TABLE(of, gpio_sbu_mux_match);
--
2.39.2
Powered by blists - more mailing lists